H_2、D_2及H_2/D_2混合气体受激拉曼特性研究EI北大核心CSCD

受激拉曼散射是扩展激光波长的重要方法,但是气体中非线性光学过程对受激拉曼光的影响非常复杂,实验研究受激拉曼光与气体气压及拉曼池耦合透镜焦距的关系是实际应用受激拉曼光的重要手段。设计了受激拉曼实验装置及其测量系统,采用Nd：YAG激光器的四倍频激光266 nm作为抽运源,活性气体（H2、D2及H2/D2混合气体）分别被密封在长为100 cm的拉曼管中,输出的拉曼激光由棱镜分光后用能量计采集保存用以研究拉曼散射特性。给出了H2、D2及H2/D2混合气体的各级Stokes和反Stokes受激拉曼激光能量与气体气压及透镜焦距的关系。获得了217.84--447.15 nm之间的12条激光谱线,有效地扩展了拉曼激光的应用范围。研究结果对气体受激拉曼光的实际应用具有十分重要的价值。     

Gd3+/Yb3+掺杂ZnO量子点作为双模式磁共振/CT成像探针

基于结合磁共振成像(MRI)的高空间分辨率和CT成像的深穿透能力设计思想,在乙醇溶液中水解醋酸锌、醋酸钆和醋酸镱,制备了油酸稳定的Gd3+/Yb3+掺杂ZnO量子点(ZnO∶Gd/Yb),并对其表面进行了氨基修饰。研究了ZnO∶Gd/Yb量子点的弛豫性能、X射线吸收性能、细胞毒性及体外MRI和CT成像。当Zn2+,Gd3+,Yb3+的摩尔比为1.0∶0.12∶0.20时,ZnO∶Gd/Yb量子点展现了最高的弛豫效率6.06 mmol/(L.s)对X-射线的吸收能力也显著高于临床CT造影剂碘比醇。体外MRI和CT成像实验表明,当Gd3+的浓度为1.5 mmol/L时,T1加权MRI信号明显增强,当Yb3+的浓度为5 g/L时,可呈现清晰的CT图像。细胞毒性实验表明,ZnO∶Gd/Yb量子点的浓度低于1.5 mmol/L(Gd3+)时,量子点的毒性相对较低。     

偏硼酸锶催化剂光催化还原CO2合成CH4

采用溶胶-凝胶法制备出偏硼酸锶(SrB₂O₄)光催化剂. 紫外光催化还原CO₂合成CH₄(在液相水中)的实验证明: SrB₂O₄催化剂的光催化活性略高于TiO₂(P25). 利用X射线电子衍射谱(XRD)、傅里叶变换红外(FTIR)光谱、X射线光电子能谱(XPS)、透射电子显微镜(TEM)、荧光(PL)光谱和紫外-可见(UV-Vis)漫反射吸收光谱等技术, 研究了SrB₂O₄ 催化剂的晶体结构、形貌和能带结构. 结果表明: SrB₂O₄ 的价带为2.07 V (vs normalhydrogen electrode (NHE)), 低于(H₂O/H⁺)的氧化还原电位E_redox^o (0.82 V (vs NHE)); 而导带为-1.47 V (vsNHE), 高于(CO₂/CH₄)的氧化还原电位E_redox^o (-0.24 V (vs NHE)). 因此, SrB₂O₄催化剂可以有效地光催化还原CO₂生成CH₄. 与TiO₂(P25)相比, SrB₂O₄催化剂具有相对较高导带, 光生电子的还原能力强于TiO₂(P25), 更有利于CH₄的生成, 从而决定了SrB₂O₄催化剂光催化还原CO₂合成CH₄具有较高的光催化活性.     

g-C3N4-BiOBr复合材料制备及可见光催化性能

利用原位沉积法将BiOBr纳米片生长到g-C₃N₄表面,制得g-C₃N₄-BiOBr p-n型异质结复合光催化剂。采用X射线衍射(XRD)、红外光谱(FTIR)、场发射扫描电子显微镜(FE-SEM)、透射电子显微镜(TEM)、紫外可见漫反射(UV-Vis-DRS)和荧光光谱(PL)等测试对光催化剂结构和性能进行表征。通过可见光辐照降解甲基橙水溶液检测评估复合光催化剂光催化活性。研究结果表明:复合光催化剂由BiOBr和g-C₃N₄两相组成,BiOBr纳米片在片状g-C₃N₄表面快速形核生长形成面-面复合结构。相比于纯相g-C₃N₄和BiOBr,g-C₃N₄-BiOBr复合材料具有更强可见光吸收能力,吸收带边红移。在可见光辐照100 min后,性能最佳的2:8 g-C₃N₄-BiOBr复合光催化剂光催化活性分别是纯相g-C₃N₄和BiOBr的1.8和1.2倍,经过4次循环实验后,其降解率仍达84%,说明复合结构光催化剂催化性能和稳定性增强。复合光催化剂的荧光强度显著降低,说明光生载流子复合得到了有效抑制。复合光催化剂催化性能的提高归因于p-n型异质结促进电荷有效分离、抑制电子-空穴复合和吸收光波长范围的扩展,相比单一成分材料具有更好的催化活性和稳定性。自由基捕获实验证明,可见光降解甲基橙光催化过程中的主要活性成分为空穴,并据此提出了可能的光催化机理。     

SAMPLED-DATA STATE ESTIMATION FOR NEURAL NETWORKS WITH ADDITIVE TIME–VARYING DELAYS

In this paper, we consider the problem of delay-dependent stability for state estimation of neural networks with two additive time–varying delay components via sampleddata control. By constructing a suitable Lyapunov–Krasovskii functional with triple and four integral terms and by using Jensen's inequality, a new delay-dependent stability criterion is derived in terms of linear matrix inequalities(LMIs) to ensure the asymptotic stability of the equilibrium point of the considered neural networks. Instead of the continuous measurement,the sampled measurement is used to estimate the neuron states, and a sampled-data estimator is constructed. Due to the delay-dependent method, a significant source of conservativeness that could be further reduced lies in the calculation of the time-derivative of the Lyapunov functional. The relationship between the time-varying delay and its upper bound is taken into account when estimating the upper bound of the derivative of Lyapunov functional. As a result, some less conservative stability criteria are established for systems with two successive delay components. Finally, numerical example is given to show the superiority of proposed method.     

复合ZrO2/MgO催化发光丙烯醛气体传感器

设计了基于在纳米ZrO2中掺杂Mg0的催化发光传感器,以快速检测丙烯醛气体.与纯ZrO2相比,MgO的掺杂量为5%时,丙烯醛的催化发光强度增大了1.8倍,干扰气体乙醛的催化发光强度降为原来的约1/7.传感器在波长425 nm,温度279 ℃,流速200 mL/min条件下,对丙烯醛具有高灵敏度和选择性,发光强度与丙烯醛...     

HL-2M装置偏滤器冷却系统设计与分析

建立了HL-2M装置偏滤器水冷流道的等效三维模型,模拟分析了冷却水系统负载的温度和压降.构建了冷却系统的一维流体模型,分析了冷却系统工程设计的水力参数,并与模拟结果进行了比较,结果符合得较好.     

Fluorescence lidar for remote monitoring of plant

<正>The laser-induced fluorescence(LIF) characteristic of plant is directly linked to the photosynthesis.The LIF lidar for remote monitoring of plant has been suggested as one of the useful tools to identify plant species and determine its physiological status for a long time.So recently a LIF lidar for remote sensing of plant in Anhui Institute of Optics and Fine Mechanics is developed.It transmits laser beam at wavelength of 354.7 and 532 nm,and receives elastic echo and fluorescence echo at wavelength of 680 and 740 nm.Numerical simulations are carried out to determine achievable lidar performance including operation range.Validity of fluorescence signal is certified and then some results are presented.Comparison of the fluorescence characteristic among birch,conifer,and algae show that the fluorescence lidar is one of the potential tools to differentiate plant species.     

Microwave Absorbing Materials： Solutions for Real Functions under Ideal Conditions of Microwave Absorption

We present general equations for metal-substrate single-layer microwave absorbing materials. The optimum electromagnetic parameters and matching thicknesses for electric-loss, magnetic-loss, and electromagnetic-loss materials are given, and possible solutions for the equations and the corresponding theoretic curves are discussed as well. The results may be helpful for designing high-performance microwave absorbing materials.     

某些钕和铒的苯甲酸类配合物的超灵敏跃迁吸收光谱研究

研究了Ｎｄ~（３＋）和Ｅｒ~（３＋）与苯甲酸、水杨酸、对羟基苯甲酸、邻氨基苯甲酸、对氯苯甲酸和邻菲罗啉配体所组成的配合物在９５％乙醇中的ｆ－ｆ超灵敏跃迁吸收光谱。计算了超灵敏跃迁峰的振子强度Ｐ、电子云伸展比β、共价参数δ和键合多数ｂ~（１／２）。探讨了配合物的共价性。