Biparametric multicommutated flow analysis system for determination of human serum phosphoesterase activity

A multicommutated flow analysis (MCFA) system constructed of microsolenoid valves and pumps offering simultaneous determination of activity of acid phosphatase (ACP) and alkaline phosphatase (ALP) in human serum samples has been developed. The MCFA system is based on optoelectronic flow-through detector made of two light emitting diodes and operating according to paired emitter detector diode (PEDD) principle. This photometric PEDD device has been dedicated for detection of p-nitrophenol (NP) generated in the course of enzymatic hydrolysis of p-nitrophenyl phosphate and optimized for the determination of NP in human serum samples. The developed PEDD-based MCFA system allows independent optimization of conditions for reaction and detection steps of photometric ACP and ALP bioassays. Moreover, it allows elimination of photometric interferences from serum matrix components according to two-points kinetic mode of measurement. The single measurement cycle takes 12 min, consists of four measurements (two for each phosphoesterase) and enables determination of serum ACP and ALP activities at physiological and pathological levels. The real analytical utility of the developed MCFA system has been confirmed by analysis of control sera as well as real human serum samples from healthy persons and oncological patients.     

Betaine and Carnitine Derivatives as Herbicidal Ionic Liquids

This study focused on the synthesis and subsequent characterization of herbicidal ionic liquids based on betaine and carnitine, two derivatives of amino acids, which were used as cations. Four commonly used herbicides (2,4‐D, MCPA, MCPP and Dicamba) were used as anions in simple (single anion) and oligomeric (two anions) salts. The obtained salts were subjected to analyzes regarding physicochemical properties (density, viscosity, refractive index, thermal decomposition profiles and solubility) as well as evaluation of their herbicidal activity under greenhouse and field conditions, toxicity towards rats and biodegradability. The obtained results suggest that the synthesized herbicidal ionic liquids displayed low toxicity (classified as category 4 compounds) and showed similar or improved efficacy against weed compared to reference herbicides. The highest increase was observed during field trials for salts containing 2,4‐D as the anion, which also exhibited the highest biodegradability (>75 %).     

Lipophilicity study of eight cephalosporins by reversed‐phase thin‐layer chromatographic method

The lipophilicity (R_M0) and specific hydrophobic surface area for the representatives of four generation cephalosporins have been determined by reversed‐phase thin‐layer chromatography, and the effect of different mobile‐phase modifiers (such as methanol, acetonitrile, acetone, 1,4‐dioxane and 2‐propanol) on the retention has been studied. The compounds studied showed typical retention behavior; their R_M values decreased linearly with increasing concentration of the organic modifier in the eluent. The linear correlations between the volume fraction of the organic solvent and the R_M values over a limited range were established for each solute, resulting in high values of correlation coefficients (>0.95 in most cases). R_M values were determined by various concentrations of organic modifier, and the correlation obtained was extrapolated to 0% of organic modifier. Chromatographically established logP (R_M0) parameters were compared with computationally calculated partition coefficients values (AClogP, ALOGP, KOWWIN, ALOGPs, XLOGP2, MLOGP and XLOGP3) and experimental octanol–water logP values (measured by the shake flask method). The received results demonstrate that RP‐TLC may be a good alternative technique for analytics in describing the lipophilic nature of investigated cephalosporins as well as the activity. Copyright © 2015 John Wiley & Sons, Ltd.     

Calorimetry in testing waste materials from the brown coal combustion

The calorimetric measurements were applied in testing the wastes collected from different furnaces in electric power plants as materials to be used in civil engineering. The fly ash materials were collected from two power stations based on different brown coal deposits and working with conventional and fluidized bed installation. The reactivity of high calcium fly ash from sub-bituminous coal combustion has been proved in calorimetric, conductometric, chemical shrinkage, and rheological measurements before their practical implementation on larger scale. Highly soluble components of fly ash contribute to the hydration products and structure formation, followed by setting and hardening of fly ash–cement mixture. These results have been the base of research project aimed in the innovative solutions dealing with the management of deposits of wastes generated as a result of coal combustion. The standardization and potential use on larger scale of these materials, necessary from the environmental point of view, seems to be the question of nearest future.     

Sustainable Drying and Torrefaction Processes of Miscanthus for Use as a Pelletized Solid Biofuel and Biocarbon-Carrier for Fertilizers

Miscanthus is resistant to dry, frosty winters in Poland and most European Union countries. Miscanthus gives higher yields compared to native species. Farmers can produce Miscanthus pellets after drying it for their own heating purposes. From the third year, the most efficient plant development begins, resulting in a yield of 25–30 tons of dry matter from an area of 1 hectare. Laboratory scale tests were carried out on the processes of drying, compacting, and torrefaction of this biomass type. The analysis of the drying process was conducted at three temperature levels of the drying agent (60, 100, and 140 °C). Compaction on a hydraulic press was carried out in the pressure range characteristic of a pressure agglomeration (130.8–457.8 MPa) at different moisture contents of the raw material (0.5% and 10%). The main interest in this part was to assess the influence of drying temperature, moisture content, and compaction pressure on the specific densities (DE) and the mechanical durability of the pellets (DU). In the next step, laboratory analyses of the torrefaction process were carried out, initially using the Thermogravimetric Analysis TGA and Differential Scaning Calorimeter DSC techniques (to assess activation energy (EA)), followed by a flow reactor operating at five temperature levels (225, 250, 275, 300, and 525 °C). A SEM analysis of Miscanthus after torrefaction processes at three different temperatures was performed. Both the parameters of biochar (proximate and ultimate analysis) and the quality of the torgas (volatile organic content (VOC)) were analyzed. The results show that both drying temperature and moisture level will affect the quality of the pellets. Analysis of the torrefaction process shows clearly that the optimum process temperature would be around 300–340 °C from a mass loss ratio and economical perspective.     

On a nonlinear boundary value problem modeling corneal shape

In this paper we present some results concerning a boundary value problem for a nonlinear ordinary differential equation that was used before in modeling the topography of human cornea. These results generalize previously obtained theorems on existence and uniqueness. We show that our equation has a unique solution for all parameters and conditions that can arise in physical situation. In the second part of the article we derive some new estimates and approximate solutions. Numerical calculations verify that these approximations are very accurate.