Stereochemical Analysis of an Aromatic Triplet Di-π-methane Rearrangement

It is shown that (−)-(S)-N,N-dimethyl-2-(1′-methylallyl)aniline ((−)-(S)- 4 ), on direct irradiation in MeCN at 20°, undergoes in its lowest-lying triplet state an aromatic di-π-methane (ADPM) rearrangement to yield (−)-(1′R,2′R)- and (+)-(1′R,2′S)-N,N-dimethyl-2-(2-methylcyclopropyl)aniline ((−)-trans- and (+)-cis- 7 ) in an initial trans/cis ratio of 4.71 ± 0.14 and in optical yields of 28.8 ± 5.2% and 15 ± 5%, respectively. The ADPM rearrangement of (−)-(S)- 4 to the trans- and cis-configurated products occurs with a preponderance of the path leading to retention of configuration at the pivot atom (C(1′) in the reactant and C(2′) in the products) for (−)-trans- 7 and to inversion of configuration for (+)-cis- 7 , respectively. The results can be rationalized by assuming reaction paths which involve the occurrence of discrete 1,4- and 1,3-diradicals (cf. Schemes 10, 12, and 13). A general analysis of such ADPM rearrangements which allows the classification of these photochemical reactions in terms of borderline cases is presented (Scheme 14). It is found that the optical yields in these ‘step-by-step’ rearrangements are determined by the first step, i.e. by the disrotatory bond formation between C(2) of the aromatic moiety and C(2′) of the allylic side chain leading to the generation of the 1,4-diradicals. Moderation of the optical yields can occur in the ring closure of the 1,3-diradicals to the final products, which may take place with different trans/cis-ratios for the individual 1,3-diradicals. Compounds (−)-trans- 7 as well as (+)-cis- 7 easily undergo the well-known photochemical trans/cis-isomerization. It mainly leads to racemization. However, a small part of the molecules shows trans/cis-isomerization with inversion of configuration at C(1′), which is best explained by a photochemical cleavage of the C(1′)–C(3′) bond.     

Efficiency calibration of HPGe detector in far and close geometries

The absolute total and full-energy peak (FEP) efficiencies of a high purity germanium (HPGe) photon detector are measured in the energy range from 40 keV to 1500 keV. The functional parameters are fitted to the calibration points from 14 long-lived standard sources (¹²⁹I,²⁴¹Am,¹⁰⁹Cd,⁵⁷Co,¹³⁹Ce,¹³⁷Cs,⁵⁴Mn,⁶⁵Zn,⁶⁰Co,²²Na,¹³³Ba,¹⁵²Eu,¹⁵⁴Eu and^166mHo) within an accuracy better than the quoted uncertainty of the calibration sources. The efficiencies in far and close geometries are compared.     

Immobilization of Mercuric reductase from aPseudomonas putida strain on different activated carriers

Mercuric reductase was isolated fromPseudomonas putida KT2442::mer-73 and immobilized on Chromatographic carriers activated by various methods. The immobilization methods for covalent coupling were compared with regard to preservation of enzymatic activity and coupling yields. Highest yields were obtained with carriers bearing the most reactive functional groups. Best results were achieved with tresyl chloride-activated carriers. The optimum binding conditions were found at pH 8. Application of the immobilized mercuric reductase for continuous treatment of Hg(II)-containing water was examined in a fixed bed reactor. Space-time yields up to 510 nmol/min-mL were attained. The kinetics of immobilized enzyme systems were not diffusion-controlled.     

Cyclotriphosphazene,a scaffold for 19F MRI contrast agents

A cyclotriphosphazene substituted with six 3,5-bis(trifluoromethyl) benzyloxy units was designed as a novel ¹⁹F MRI contrast agent. The resulting molecule has 36 magnetically equivalent fluorine atoms and exhibited suitable MRI properties with high imaging sensitivity, confirming the proof-of-concept as a convenient scaffold for the production of new ¹⁹F MRI contrasts agents.     

X-ray structure of palladium (II) complex and its catalytic activity on Suzuki–Miyaura reaction under mild conditions

Research on Chemical Intermediates - Palladium (II) complex with 4-tert-butylbenzoic hydrazide (TBBH)/triphenylphosphine (PPh3) ligands was successfully synthesized and characterized by X-ray,...     

Ab initio MRD-CI investigation of the electronic spectrum of 1-chloromethyl hypochlorite ClCH2OCl in comparison with isomeric dichloromethanol Cl2CHOH

The electronic absorption spectrum of 1-chloromethyl hypochlorite ClCH₂OCl is computed with multi-reference configuration interaction (MRD-CI) methods and compared to isomeric dichloromethanol. While the first dipole-allowed transitions of dichloromethanol Cl₂CHOH are obtained above 7 eV, the corresponding transitions of ClCH₂OCl are obtained at much lower energy, namely 3.66eV (1¹A″ ←[Xtilde]¹A′), 4.96eV (2¹A′←[Xtilde]¹A′), 6.04eV (2¹A″←[Xtilde]¹A′) and 6.67eV (3¹A′ ← [Xtilde]¹ A′). A further strong transition is computed at 7.82eV (4¹A′ ← [Xtilde]¹A′) with a relatively large oscillator strength of ? = 0.4.     

PHA-L lectin and carbohydrate relationship: conjugation with CdSe/CdS nanoparticles, radiolabeling and in vitro affinities on MCF-7 cells

This research aims to investigate the interaction between phytohemagglutinin-L (PHA-L) and sialic acid, which is abundant on the breast cancer cell (MCF-7) surface and displays monosaccharide characteristics, by experimental and computational methods. Experimentally, CdSe/CdS nanoparticles (QDs) were synthesized; PHA-L was conjugated with QDs and labeled with ¹²⁵I. Radiolabeling yield was found to be 97 ± 1.2 %. Afterwards, in vitro bioaffinities of radiolabeled PHA-L conjugated QDs have been investigated on MCF-7 cells and it has been observed that the cell incorporation increased with time. The results indicated that ¹²⁵I labeled QD-PHA-L conjugates represent significant affinity on MCF-7 cells. In the second step of the study, the crystal structure of carbohydrate interaction surface of PHA-L was extracted from the crystal structure of PHA-L. The interactions between this surface and sialic acid were calculated by computational tools. These calculations revealed specific interactions between PHA-L and sialic acid. Semi-empirical methods, PM3 and AM1, were used in these calculations. Significant outcomes have been obtained from the experimental and computational studies and these results demonstrated that PHA-L may be an effective agent for imagining MCF-7 cells.     

SPE and determination by FAAS of heavy metals using a new synthesized polymer resin in various water and dried vegetables samples

Firstly, poly[phenyl thiadiazole methacrylamide-co-divinylbenzene-co-2-acrylamido-2-methylpropane sulfonic acid] (PTMAAm-co-DVB-co-AMPS), a new polymer resin was synthesized. This polymer resin was characterized by elemental analyzer, X-ray diffractometer, scanning electron microscope (SEM) and IR spectrometer. The glass column packed with the synthesized polymer resin was used for solid phase extraction (SPE). At the same time, the analytes were separated and preconcentrated from various water, dried vegetables samples and standard reference material (CRM) with SPE and determined by flame atomic absorption spectrometer (FAAS). The experimental conditions of this method such as pH, flow rates of sample, flow rates of eluent, type / concentration / volume of eluent, sample volume and matrix ions were examined. The limits of detection (µg L^?1) were calculated (3s) 0.9 for Mn(II), 1.4 for Cd(II), Co(II) and Zn(II), 1.5 for Cr(III), 2.2. for Cu(II), 1.9 for Pb(II),1.5 for Ni(II) and 1.9 for Fe(III) (n = 21). The low relative standard deviation, ≤ 2% (n = 11) and preconcentration factor as 75 for analytes were obtained.     

On-line preconcentration and determination of Au(III) in various environmental/industrial samples by flame atomic absorption spectrometry

A rapid and simple on-line method is described for the determination of Au(III) in various samples. The method is based on the sorption of gold(III) on Lewatit MonoPlus TP207 chelating resin including the iminodiacetate group, which is used as sorbent material and packed in a minicolumn. The chemical variables such as the pH of the sample solution, eluent type, interfering ions and concentrations of reagents, and instrumental variables such as sample loading volume, reagents flow rates, and tubing length, which affect the efficiency of the method were studied and optimised. Au(III) was sorbed on the chelating resin, from which it could be eluted with 3 mol L^?1 HCl, and then introduced directly to the nebuliser-burner system of FAAS. The limit of detection of the method was 0.2 µg L^?1 while the relative standard deviation was <4.0% for 20 µg L^?1 Au(III) concentration. The preconcentration factor was found to be 106 while the optimised sample volume was 15.3 mL. The accuracy of the method was verified by analysing the certified reference material. The developed method was applied successfully for the determination of gold in different samples with satisfactory results.