Classification of white wine aromas with an electronic nose

This paper reports the use of a tin dioxide multisensor array based electronic nose for recognition of 29 typical aromas in white wine. Headspace technique has been used to extract aroma of the wine. Multivariate analysis, including principal component analysis (PCA) as well as probabilistic neural networks (PNNs), has been used to identify the main aroma added to the wine. The results showed that in spite of the strong influence of ethanol and other majority compounds of wine, the system could discriminate correctly the aromatic compounds added to the wine with a minimum accuracy of 97.2%.     

Studies on the conversions of diols and cyclic ethers—49: Stereochemistry of cyclodehydration of 1,4-diols on the action of brönsted and lewis acids: a comprehensive study

The stereochemistry of the cyclodehydration of (±)- and meso-2,5-hexanediol on the action of various dehydrating agents was investigated. The earlier assumed and confirmed intramolecular S_N2 mechanism for acid-catalysed ring-closure was found to hold in most cases. Various extents of racemisation can be observed on the action of certain Lewis acids, and the solvents concentrated H₂SO₄ and HMPT (hexamethyl phosporic acid triamide) under previously unexamined reaction conditions.     

Pentacoordinate nickel(II) complexes double bridged by phosphate ester or phosphinate ligands: spectroscopic, structural, kinetic, and magnetic studies

The bis(phosphatediester)-bridged complexes [[Ni([12]aneN(3))(mu-O(2)P(OR)(2))](2)](PF(6))(2) [[12]aneN(3)=Me(3)[12]aneN(3), 2,4,4-trimethyl-1,5,9-triazacyclododec-1-ene; R=Me (1), Bu (2), Ph (3), Ph-4-NO(2) (4); [12]aneN(3)=Me(4)[12]aneN(3), 2,4,4,9-tetramethyl-1,5,9-triazacyclododec-1-ene; R=Me (5), Bu (6), Ph (7), Ph-4-NO(2) (8)] were prepared by hydrolysis of the phosphate triester with the hydroxo complex [[Ni([12]aneN(3))(mu-OH)](2)](PF(6))(2) or by acid-base reaction of the dialkyl or diaryl phosphoric acid and the above hydroxo complex. The acid-base reaction was also used to synthesise the phosphinate-bridged complexes [[Ni([12]aneN(3))(mu-O(2)PR(2))](2)](PF(6))(2) [[12]aneN(3)=Me(3)[12]aneN(3), R=Me (9), Ph (10); [12]aneN(3)=Me(4)[12]aneN(3), R=Me (11), Ph (12)]. The molecular structures of complexes 2, 3 and 12 were established by single crystal X-ray diffraction studies. The eight-membered rings defined by the nickel atoms and the bridging ligands show distorted twist-boat, chair and boat-boat conformations in 2, 3 and 12, respectively. The experimental susceptibility data for compounds 2, 3 and 12 were fitted by least-squares methods to the analytical expression given by Ginsberg. The best fit was obtained with values of J=-0.11 cm(-1), D=-9.5 cm(-1) and g=2.20 for 2; J=-0.97 cm(-1), D=-9.3 cm(-1) and g=2.21 for 3; and J=-0.14 cm(-1), D=-11.9 cm(-1) and g=2.195 for 12. The magnetic-exchange pathways must involve the phosphate/phosphinate bridges, because these favour antiferromagnetic interactions. The observation of a higher exchange parameter for compound 3 is a consequence of a favourable disposition of the O-P-O bridges. The kinetics for the hydrolysis of TNP (tris(4-nitrophenyl)phosphate) with the dinuclear nickel(II) hydroxo complex [[Ni(Me(3)[12]aneN(3))(mu-OH)](2)](PF(6))(2) was studied by UV-visible spectroscopy. The proposed mechanism for TNP-promoted hydrolysis can be described as one-substrate/two-product, and can be fitted to a Michaelis-Menten equation.     

Heteronuclear Nickel‐Iron Complexes and the Crystal Structure of [Fe2(CO)6(μ3‐S)2{Ni(dppe)}]

A series of heteronuclear nickel‐iron complexes [Fe₂(CO)₆(μ‐SH)(μ₃‐S){NiCl(PPh₃)₂}] ( 1 ), [Fe₂(CO)₆(μ‐SH)(μ₃‐S){NiCl(dppe)}] ( 2 ), [Fe₂(CO)₆(μ₃‐S)₂{Ni(PPh₃)₂}] ( 3 ), [Fe₂(CO)₆(μ₃‐S)₂{Ni(dppe)}] ( 4 ) and [Fe₂(CO)₆(μ‐SPh)(μ₃‐S){NiCl(dppe)}] ( 5 ) have been prepared. The structure of 4 has been determined by X‐ray crystallography. The central metal‐sulfur core of 4 has a trigonal bipyramidal shape with a NiFe₂ base plane with two axial sulfur atoms. Each iron atom is 5‐coordinate forming a distorted square pyramid; the nickel is square planar coordinated by two sulfur atoms and two phosphorus atoms.     

Simultaneous Determination of Ascorbic Acid and Uric Acid by Using a PVC/TTF‐TCNQ Composite Electrode as Detector in a FIA System

A PVC/TTF‐TCNQ composite electrode has been employed as detector in a flow injection system. The proposed method allows the simultaneous detection of ascorbic acid (AA) and uric acid (UA) in mixtures by using a FIA system in a simple manner, without pre‐treatment or modified electrode. This method is based on the amperometric determination of (a) ascorbic acid at 0.15 V and (b) both analytes at 0.35 V, being the response linear in the range 1×10^?2–4×10^?4 M for both analytes with detection limits (S/N=3) of 1.2×10^?4 M and 8.1×10^?5 M for AA and UA, respectively.     

High-temperature thermal behaviour of Cr-Doped LiMn<Subscript>2</Subscript>O<Subscript>4</Subscript> spinels synthesized by the sucrose-aided combustion method

Chromium doped spinels LiCr_YMn_2−YO₄ (0.2≤Y≤0.8) has been synthesized by the sucrose-aided combustion procedure. The thermal behaviour, phase homogeneity and structural characteristics of the samples were studied by thermal analysis, coupled mass spectrometry, and room-and high-temperature X-ray diffraction methods. It was found that the ‘as prepared’ samples contained residual organic impurities undetectable for X-ray diffraction, that burn out completely at 400°C. Samples treated between 400 and 750°C are single phase spinels, whose crystallites size increase from 10 to 50 nm on increasing the temperature. Cr-doping enhances the thermal stability of the spinels, which augments on increasing the Cr content Y. The enhanced thermal stability of the spinels has been accounted for based on the high excess stabilization energy of Cr³⁺ in octahedral ligand field.     

Autoignition temperature: comprehensive data analysis and predictive models

ABSTRACT

Here we report a new predictive model for autoignition temperature (AIT), an important physical parameter widely used to assess potential safety hazards of combustible materials. Available structure-AIT data extracted from different sources were critically analysed. Support vector regression (SVR) models on different data subsets were built in order to identify a reliable compound set on which a realistic model could be built. This led to a selection of the dataset containing 875 compounds annotated with AIT values. The thereupon-based SVR model performs reasonably well in cross-validation with the determination coefficient r ² = 0.77 and mean absolute error MAE = 37.8°C. External validation on 20 industrial compounds missing in the training set confirmed its good predictive power (MAE = 28.7°C).     

On the generality of a cosmological speculation based on Heisenberg's principle

In a previous work [Hernández-Bermejo, B. (1996) Heisenberg's principle: A cosmological speculation, Speculations in Science and Technology, 19, 253], it was speculated that the lack of homogeneity of the large-scale structure of the universe may be due to quantum fluctuations of space in the early universe. This was argued for a Friedmann-type universe for which both the curvature and the cosmological constant were zero. Here it is shown that the same considerations are valid for arbitrary values of the curvature and .     

Estimation of the uncertainty of mass measurements from in-house calibrated analytical balances

The uncertainty evaluation of mass measurements when using “in-house” calibrated analytical balances is revisited according to the Guide to the expression of Uncertainty Measurement (GUM). The calibration of analytical balances is discussed according to the guidelines of several bodies such as ASTM, UKAS and DKD/PTB. The remainder components of uncertainty can be estimated from the balance data sheet specifications.     

Electrochemical and Photochemical Conversion of [Ru3Ir(μ 3-H)(CO)13] into [Ru3Ir(μ-H)3(CO)12]

Electrochemical and photochemical properties of the tetrahedral cluster [Ru₃Ir( ₃-H)(CO)₁₃] were studied in order to prove whether the previously established thermal conversion of this cluster into the hydrogenated derivative [Ru₃Ir(-H)₃(CO)₁₂] also occurs by means of redox or photochemical activation. Two-electron reduction of [Ru₃Ir( ₃-H)(CO)₁₃] results in the loss of CO and concomitant formation of the dianion [Ru₃Ir( ₃-H)(CO)₁₂]^2–. The latter reduction product is stable in CH₂Cl₂ at low temperatures but becomes partly protonated above 283K into the anion [Ru₃Ir(-H)₂(CO)₁₂]^– by traces of water. The dianion [Ru₃Ir( ₃-H)(CO)₁₂]^2– is also the product of the electrochemical reduction of [Ru₃Ir(-H)₃(CO)₁₂] accompanied by the loss of H₂. Stepwise deprotonation of [Ru₃Ir(-H)₃(CO)₁₂] with Et₄NOH yields [Ru₃Ir(-H)₂(CO)₁₂]^– and [Ru₃Ir( ₃-H)(CO)₁₂]^2–. Reverse protonation of the anionic clusters can be achieved, e.g., with trifluoromethylsulfonic acid. Thus, the electrochemical conversion of [Ru₃Ir( ₃-H)(CO)₁₃] into [Ru₃Ir(-H)₃(CO)₁₂] is feasible, demanding separate two-electron reduction and protonation steps. Irradiation into the visible absorption band of [Ru₃Ir( ₃-H)(CO)₁₃] in hexane does not induce any significant photochemical conversion. Irradiation of this cluster in the presence of CO with _irr>340nm, however, triggers its efficient photofragmentation into reactive unsaturated ruthenium and iridium carbonyl fragments. These fragments are either stabilised by dissolved CO or undergo reclusterification to give homonuclear clusters. Most importantly, in H₂-saturated hexane, [Ru₃Ir( ₃-H)(CO)₁₃] converts selectively into the [Ru₃Ir(-H)₃(CO)₁₂] photoproduct. This conversion is particularly efficient at _irr >340nm.