High resolution capillary electrophoresis of carbon nanotubes

Purification of single-walled carbon nanotubes by capillary electrophoresis (CE) is demonstrated. Real-time Raman spectroscopy of the separation process and single-wavelength UV/vis detection show the ability of CE to provide high-resolution separations of nanotube fractions with baseline separation. AFM images of collected fractions demonstrate that separations are based on tube length. The separation method is suggested to be based on alignment of the nanotubes along the separation field.     

Spontaneous emission in the near field of two-dimensional photonic crystals

We show theoretically that photonic crystal membranes cause large variations in the spontaneous emission rate of dipole emitters, not only inside but also in the near field above the membranes. Our three-dimensional finite-difference time-domain calculations reveal an inhibition of more than five times and an enhancement of more than ten times for the spontaneous emission rate of emitters with select dipole orientations and frequencies. Furthermore, we demonstrate theoretically the potential of a nanoscopic emitter attached to the end of a glass fiber tip as a local probe for mapping the large spatial variations of the photonic crystal local radiative density of states. This arrangement is promising for on-command modification of the coupling between an emitter and the photonic crystal in quantum optical experiments.     

Application of the H-point standard addition method to the speciation of Fe(II) and Fe(III) with chromogenic mixed reagents

Simultaneous determination of Fe(II) and Fe(III) or selective determination of each oxidation state of iron in the presence of the other one by H-point standard addition method (HPSAM) is described. Mixed reagents of 1,10-phenanthroline and salicylic acid was used as a selective chromogenic system for speciation of Fe(II) and Fe(III). It was shown that with appropriate selection of wavelength pairs, both Fe(II) and Fe(III) can be considered as analyte. The results showed that Fe(II) and Fe(III) can be determined simultaneously with the concentration ratios of Fe(II) to Fe(III) varying from 10:1 to 1:20 in the mixed sample. The accuracy and precision of the method are all satisfactory.     

Application of H-point standard addition method and partial least squares to the simultaneous kinetic-potentiometric determination of hydrazine and phenylhydrazine

Simultaneous determination of hydrazine (HZ) and phenylhydrazine (PHZ) by H-point standard addition method (HPSAM) and partial least squares (PLS) regression was carried out based on kinetic data from novel potentiometry methods. The rate of chloride ion production in the reaction of HZ and PHZ with N-chlorosuccinimide (NCS) was monitored by a chloride ion-selective electrode. The experimental data show the good ability of ion-selective electrodes (ISEs) as detectors not only for the direct determination of chloride ion but also for simultaneous kinetic-potentiometric analysis using HPSAM and PLS methods. The methods are based on the differences observed in the production rate of chloride ions. The results show that simultaneous determination of HZ and PHZ can be performed in concentration ranges of 0.5 - 20.0 and 0.8 - 25.0 microg mL(-1), respectively. The total relative standard error for applying the PLS method to 8 synthetic samples in the concentration ranges of 1.0 - 16.0 microg mL(-1) for HZ and 2.0 - 16.0 microg mL(-1) for PHZ was 3.96. In order for the selectivity of the method to be assessed, we evaluated the effects of certain foreign ions upon the reaction rate and assessed the selectivity of the method. Both methods (PLS and HPSAM) were evaluated using a set of synthetic sample mixtures and then applied for simultaneous determination of HZ and PHZ in water samples.     

Composition of essential oils in subterranean organs of three species of Valeriana L

Essential oils from the subterranean organs of three species of Valeriana L. from Iran (Valeriana sisymbriifolia Vahl, Valeriana alliariifolia Adams and Valeriana officinalis L.) belonging to Valerianaceae family have been obtained by hydrodistillation and analysed by gas chromatography-mass spectrometry in order to discern the differences and similarities between the volatile chemical compositions of these species. More than 100 components were identified in essential oils of the studied plants (Supplementary Table S1--online only). The principal common constituents of the three species of Valeriana were spathulenol, limonene, γ-terpinene, vulgarone B and p-cymene. The main essential oil ingredients were α-selinene (7.83%) in V. sisymbriifolia, limonene (3.53%) in V. alliariifolia and spathulenol (13.33%), α-campholenal (11.48%), vulgarone B (8.38%) and valerenal (8.32%) in V. officinalis plants. Ageratochromene (precocene II), a chromene substance with antibacterial, antifungal, insecticidal and antijuvenile hormonal activities, was found at high levels (35.59% and 36.58%) in the essential oils of V. sisymbriifolia plants.     

A comprehensive Monte Carlo simulation of styrene atom transfer radical polymerization

<正>An optimized and high-performance Monte Carlo simulation is developed to take thorough account of four different cases of termination in styrene ATRP.According to the simulation results,the bimolecular termination rate constant sharply drops throughout the polymerization when either chain-length dependency of termination rate constant,gel effect,or both together is applied to the simulation.In addition,as expected,the initiator is quickly decomposed at the early stages of the polymerization.The concentration of the catalyst in lower oxidation state decreases at first and then plateaus at higher conversion;furthermore,the steady concentration of M_t~nY/L in the polymerization is the highest when the chain-length-dependent diffusion-controlled termination rate constant is employed in the simulation.The rates of deactivation and chain end degradation reactions are also smaller in this case.Therefore,the fraction of dormant chains is higher throughout the reaction and consequently the portion of dead polymers decreases.Besides,molecular weight increases linearly with conversion;however,when neither gel effect nor chain-length dependency of termination rate constant is considered,the molecular weight deviates from linearity at the end of the reaction.The peak of chain length distribution shifts toward higher molecular weight too during the reaction.Finally,the molecular weight distribution broadens at higher conversion;however, the chain length distribution of polymers produced under conditions of applying chain-length-dependent diffusion-controlled termination rate constant is narrower.     

甲烷氧化偶联锂/氧化镁催化剂和纳米催化剂

采用初湿浸渍和溶胶凝胶法分别制备了Li/MgO催化剂和Li/MgO纳米催化剂. 比较两种Li/MgO催化剂对于甲烷氧化偶联反应的催化性能. 采用X射线衍射、BET吸附和透射电镜进行了表征.在973-1073 K和总压力为101 kPa下对催化剂进行了测试. 实验结果表明,Li/MgO纳米催化剂比普通催化剂对于甲烷氧化偶联反应表现为更高的甲烷转换率,较高选择性和较高的的主要产品(乙烷和乙烯)的产率.     

Efficient visible-light-induced photocatalytic degradation of MO on the Cr-nanocrystalline titania-S

In order to improve visible light photocatalytic activities of the nanometer TiO₂, a novel and efficient Cr,S-codoped TiO₂ (Cr-TiO₂-S) photocatalyst was prepared by precipitation-doping method. The crystalline structure, morphology, particle size, and chemical structure of Cr-TiO₂-S were characterized by X-ray diffraction (XRD), transmission electron microscopy (TEM), scanning electron microscopy (SEM), and Fourier transform infrared (FT-IR) techniques, respectively. Results indicate that the doping of Cr and S, cause absorption edge shifts to the visible light region (λ > 420 nm) compare to the pure TiO₂, reduces average size of the TiO₂ crystallites, enhances desired lattice distortion of Ti, promotes separation of photo-induced electron and hole pair, and thus improves pollutant decomposition under visible light irradiation. The photocatalytic activities of Cr-TiO₂-S nanoparticles were evaluated using the photodegradation of methyl orange (MO) as probe reaction under the irradiation of UV and visible light and it was observed that the Cr-TiO₂-S photocatalyst shows higher visible photocatalytic activity than the pure TiO₂. The optimal Cr-TiO₂-S concentration to obtain the highest photocatalytic activity was 5 mol% for both of Cr and S.