Vacancy ion-exclusion chromatography of carboxylic acids on a weakly acidic cation-exchange resin

In this preliminary study, a new approach to ion-exclusion chromatography is proposed to overcome the relatively poor conductivity detection response which occurs in ion-exclusion chromatography when acids are added to the eluent in order to improve peak shape. This approach, termed vacancy ion-exclusion chromatography, requires the sample to be used as eluent and a sample of water to be injected onto a weakly acidic cation-exchange column (TSKgel OApak-A). Vacancy peaks for each of the analytes appear at the retention times of these analytes. Highly sensitive conductivity detection is possible and sharp, well-shaped peaks are produced, leading to efficient separations. Retention times were found to be affected by the concentration of the analytes in the eluent, and also by the presence of an organic modifier such as methanol in the eluent. Detection limits for oxalic, formic, acetic, propionic, butyric and valeric acids were 0.1, 0.2, 0.3, 0.3, 0.4 and 0.5 microM, respectively, and linear ranges for some acids extended over two orders of magnitude. Precision values for retention times were 0.21% and for peak areas were <1.90%. The vacancy ion-exclusion chromatography method was found to give detection responses four to 10 times higher than conventional ion-exclusion chromatography using sulfuric acid eluent and two to five times higher than conventional ion-exclusion chromatography using benzoic acid eluent.     

Ti2(OMe)4/SiO2催化剂的制备及其合成碳酸二甲酯的反应性能

采用表面改性和离子交换法制备了SiO2负载的Ti2(OMe)4双核桥联配合物催化剂，用IR、TPD和微反技术考察了催化剂的表面构造及CO2和CH3OH在催化剂表面上的化学吸附和反应性能。结果表明：双核桥联配合物Ti2(OMe)4以Ti-O-Si键锚定在SiO2表面上；CO2在催化剂表面存在桥式和甲氧碳酸酯基两种吸附态，其中甲氧碳酸酯基吸附态是生成DMC的关键物种；CH3OH在催化剂上只有一种分子吸附态。在150℃以下，CO2和CH3OH在Ti2(OMe)4/SiO2催化剂表面上高选择地生成碳酸二甲酯。     

Theoretical study of reaction channels for the weakly bound complex systems created with HF,CO2, and various amines

This investigation conducted reaction channels of weakly bound complexes CO₂…HF, CO₂…HF…NH₃, CO₂…HF…NH₂CH₃, CO₂…HF…NH(CH₃)₂, and CO₂…HF…N(CH₃)₃ systems, using the Gaussian 98 package at the B3LYP/6‐311++G(3df,2pd) level. The syn‐fluoroformic acid or syn‐fluoroformic acid plus NH₃ or amine conformers are more stable than the related anti‐fluoroformic acid or anti‐fluoroformic acid plus NH₃ or amine conformers. However, the above‐mentioned weakly bound complexes are more stable than both the related syn‐ and anti‐type fluoroformic acid or acid plus NH₃ or amine conformers and their related decomposed into CO₂ + HF or CO₂ + NHR₃F (R?H, CH₃) combined molecular systems. Five reaction channels of the weakly bound complexes exist. Each channel includes weakly bound complexes and their related above‐mentioned systems. Moreover, each reaction channel contains two transition states. The transition state between the weakly bound complex and anti‐fluoroformic acid type structure (T₁₃) is significantly higher than that of internal rotation (T₂₃) between syn‐ and anti‐FCO₂H (or FCO₂H…NR₃) structures. However, the above‐mentioned T₁₃ can significantly decrease its energy by adding the third molecule NH₃ or NR₃ (R?H or CH₃). The more CH₃ that is substituted in NR₃ of the reaction channel, the lower the activation energy of the transition state in the system is affected. © 2005 Wiley Periodicals, Inc. Int J Quantum Chem, 2005     

Characterization of an avidin-bonded column for direct injection in reversed-phase high-performance liquid chromatography

An automatic method for the determination of metabolites of Ropivacaine in urine was set up. It utilizes supported liquid membrane extraction for sample clean-up and enrichment, followed by ion-pair chromatography determination using UV detection. The extraction was very selective with no observed interfering compounds from the urine matrix, permitting simple isocratic chromatographic analysis. The detection limits for spiked urine samples were 2–18 nM for the different compounds. The repeatability was 1–3% (RSD) with an internal standard that was also extracted, and about twice without this standard. A throughput of 3.3 samples per hour was achieved and the liquid membrane was stable for more than a week.     

(XN)4R4簇合物的结构与化学键

用密度泛函理论,在B3LYP/6-311G水平上,对(XN)4R4 (X=C,Si,Ge;R=H,CH3,NH2,OH)及合成的先驱化合物(XN)2R2进行几何构型、电子结构、振动频率和化学反应焓变等进行了研究.结果表明,(RCN)4比(CNR)4更稳定.所有簇合物的零点能EZP值,R=H时最小,R=CH3时最大,R配位原子依次为C、N和O时,EZP值逐渐减小.     

Studies on polyyne polymers containing transition metals in the main chain. VII. Synthesis and characterization of palladium-polyyne polymers

Metal-polyyne polymers consisting of palladium and conjugated acetylenic systems, where P_D and R represent the —Pd(PBu₃)₂—moiety and alkyl groups, respectively, were prepared by polycondensation between palladium chlorides and α,ω-diethynyl compounds in amines using a catalytic amount of cuprous iodide. The molecular weights of the polymers formed were greatly affected by the basicity of the amines and the addition of free phosphines to the polymerization system. Under the optimum conditions, i.e., in the presence of CuI and PBu₃ (in molar ratio 1/4) in piperidine at room temperature, polymer Ia (R¹ = R² = H) having M?_w = 29,000 was obtained.     

Polymers having stable radicals. II. Synthesis of nitroxyl polymers from 4-methacryloyl derivatives of 1-hydroxy-2,2,6,6-tetramethylpiperidine

Polymers having stable pendant . radicals were synthesized through their precursor polymers by oxidizing them in air or by H₂O₂–Na₂WO₄. Hydrochlorides and sulfates of 4-methacryloylamino- and 4-methacryloyloxy-1-hydroxy-2,2,6,6-tetramethylpiperidines were synthesized as precursor monomers and polymerized by using α,α′-azobisisobutyronitrile under appropriate conditions to precursor polymers of high molecular weight: poly-4-methacryloylamino-/oxy-1-hydroxy-2,2,6,6-tetramethylpiperidinehydrochlorides and sulfates. The precursor polymers were converted to polymers having nitroxyl stable radicals, i.e., poly-4-methacryloylamino-/oxy-2,2,6,6-tetramethylpiperidine-1-oxyls, by oxidation in air or with H₂O₂–Na₂WO₄ without any main-chain scission. The structure of the resultant stable radical polymers was determined by infrared, ultraviolet, and ESR spectroscopy. Based on the results of spectroscopic analysis and Kjeldahl analysis, the transformation from precursors to nitroxyl stable radical polymers was found to be quantitative. Investigations on the applicability of polymeric nitroxyl radicals to oxidation-reduction reactions were attempted by means of polarography; the reduction half-wave potential was found to be ?1.16 V for the mercury pool.     

(ClAlNH)n簇合物的结构与稳定性

用量子化学从头算方法（HF／6－31G）和密度泛函理论（DFT）的B3LYP方法，以6－31G标准基组加一个极化函数，对（ClAlNH)n(n=1-10)簇合物的几何构型，电子结构和红外光谱进行了优化，并讨论了聚合反应（ClAlNH)m→(ClAlNH)n的热力学效应，结果表明，（ClAlNH)n系列簇合物的基态稳定结构为Cs(n=1),D2h(n=2),D3h(n=3),Td(n=4),Cs(n=5),D3d(n=6),Cs(n=7),S4(n=8),D3h(n=9),C2h(n=10,n=2,4,6,8,10等偶数对应的（ClAlNH)n簇化合物的结构比n等于奇数量更稳定。     

Direct observation of the multistep helix formation of poly-L-glutamic acids

The helix formation dynamics of poly-L-glutamic acids (PGAs) were observed by the microsecond-resolved Fourier transform infrared (FTIR) and circular dichroism (CD) spectroscopies. The helix formation of 34-residue PGA from random coil at pH (or pD for FTIR) 8.0 was initiated by a pH jump to 4.9 using the rapid solution mixer whose mixing dead time is 50 micros. The amide I' line in the time-resolved FTIR spectra exhibited the fast (<100 micros) increase of the total helical content. The time-resolved CD spectra of the same process also showed the fast (<150 micros) formation of short helical segments (5 +/- 1 residues), which was followed by the slower (<1 ms) elongation of the short helices to longer helices (>10 residues). Similar dynamics were observed for the same pH jump of approximately 190-residue PGA, although there were additional steps that made the helix formation of approximately 190-residue PGA more complex. The observed multistep helix formation is likely caused by the strong hydrogen-bonding interactions between the protonated side chains of PGAs.     

Enthalpies of mixing of <Emphasis Type="Italic">o</Emphasis>- and <Emphasis Type="Italic">m</Emphasis>-isomers at 298.15 K

Excess enthalpies (H ^E) of 17 binary mixtures of o- and m-isomers of dichlorobenzene, difluorobenzene, methoxymethylbenzene, dimethylbenzene, dimethoxybenzene, aminofluorobenzene, fluoronitrobenzene, diethylbenzene, chlorofluorobenzene, fluoroiodobenzene, bromofluorobenzene, chloromethylbenzene, fluoromethylbenzene, bromomethylbenzene, iodomethylbenzene, fluoromethoxybenzene, dibromobenzene at 298.15 K were measured. All excess enthalpies measured were very small, and those of o-+m-isomers of aminofluorobenzene, dibromobenzene and iodomethylbenzene were negative but 14 other binary mixtures of isomers were positive over the whole range of mole fractions. H ^E of o-+m-isomers of dimethoxybenzene showed the largest enthalpic instability and those of aminofluorobenzene showed the largest enthalpic stability. There was a correlation between dipole–dipole interaction, dipole–induced dipole interaction or entropies of vaporization and excess partial molar enthalpies at infinite dilution.