Synthesis and adsorption properties of gold nanoparticles within pores of surface‐functional porous polymer microspheres

Mesoporous polymer microspheres with gold (Au) nanoparticles inside their pores were prepared considering their surface functionality and porosity. The Au/polymer composite microspheres prepared were characterized by transmission electron microscope (TEM), X‐ray diffraction (XRD), and Brunauer–Emmett–Teller (BET) techniques. The results showed that the adsorption of Au nanoparticles could be increased by imparting the pore structure and surface‐functional groups into the supporting polymer microspheres (in this study, poly (ethylene glycol dimethacrylate‐co‐acrylonitrile) and poly (EGDMA‐co‐AN) system). Above all, from this study, it was established that the porosity of the polymer microspheres is the most important factor that determines the distribution and adsorption amount of face‐centered cubic (fcc) Au nanoparticles in the final products. Our study showed that the continuous adsorption of Au nanoparticles with the aid of the large surface area and surface interaction sites formed more favorably the Au/polymer composite microspheres. The BET measurements of Au/poly(EGDMA‐co‐AN) composite microspheres reveals that the adsorption of Au nanoparticles into the pores kept the pore structure intact and made it more porous. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 5627–5635, 2004     

EXISTENCE AND UNIQUENESS OF THE SOLUTION FOR NONLINEAR THIRD-ORDER ROBIN BOUNDARY VALUE PROBLEM WITH A TURNING POINT

The paper aims to obtain existence and uniqueness of the solution as well as asymptotic estimate of the solution for singularly perturbed nonlinear third- order Robin boundary value problem with a turning point.In order to achieve this aim,existence and uniqueness of the solution for third-order nonlinear Robin boundary value problem is derived first based on the upper and lower solutions method under relatively weaker conditions.In this manner,the goal of this paper is gained by applying the existence and uniqueness results mentioned above.     

高阶线性微分方程的解及其解的导数的不动点

研究了复域齐次和非齐次线性微分方程的解及其解的导数的不动点与超级问题,得到了整函数系数的齐次和非齐次线性微分方程的解及其解的导数的不动点的两个结果,所得结果推广了一些相关结果.     

离子注入诱导量子阱界面混合效应的光致荧光谱研究

采用多元芯片方法获得了一系列不同离子注入剂量的GaAsAlGaAs非对称耦合量子阱单元,通过光致荧光谱测量,研究了单纯的离子注入导致的界面混合效应.荧光光谱行为与有效质量理论计算研究表明,Al原子在异质结界面的扩散在离子注入过程中已基本完成,而热退火作用主要是去除无辐射复合中心. 关键词： 量子阱 离子注入 光致荧光谱 界面混合     

碰壁分子的平均速率和平均能量

本文对气体系统内的碰壁分子的平均速率和平均能量为会么会大于系统内分子的平均速率和平均能量进行了定性解释，并求出了这两类不同平均值之间的一般关系，最后针对经典理想气体算出了定量结构。     

Ag-Bi高温超导线材转变温度的测量

介绍了 Bi系银包套高温超导线材的电阻温度特性 ,用测电阻和电磁感应两种方法分别测量了材料的超导转变温度 ,电磁感应法测量曲线上台阶的出现表明材料中 Bi(2 2 2 3)和 Bi(2 2 12 )两相的存在。     

Crystallization process of Bi(Pb)-Sr-Ca-Cu-O glass

A crystallization study has been carried out for rapidly solidified Bi₂Pb_0.5Sr₂Ca₄Cu₅O_x glass. Glass transition temperature T _g, crystallized superconducting phases and microstructural changes were measured and analysed by differential thermal analysis (DTA), X-ray diffraction (XRD), and scanning electron microscopy (SEM). The crystallization mechanism of the three superconducting phases — (2201) 20 K phase, (2212) 80 K phase, and (2223) 110 K phase — has been discussed, and a time-temperature-transformation diagram for the glass has been constructed.     

液态铅的电阻率

采用精确的结构因数实验数据和Ｂｅｈａｖｉ模型赝势，用Ｚｉｍａｎ理论计算了液态铅的电阻率．计算结果和实验数据符合很好．讨论了Ｚｉｍａｎ理论对液态铅的适用性以及适合于液态铅的赝势的特征．     

Characteristic of a broadband Ti:LiNbO3 optical modulator with buried electrodes and etched grooves in the buffer layer

Traveling wave Ti:LiNbO₃ Mach-Zehnder optical modulators with buried electrodes and etched grooves in the SiO₂ buffer layer are analyzed by the finite element method. The tradeoff between the bandwidth BW and the half-wave voltage Vπ is discussed. The value of BW/Vπ is used to weight the total performance of the modulator. Taking a thick buffer layer and etching deep grooves in the buffer layer are demonstrated as two effective methods to improve the performance of the modulator. A 3-dB optical bandwidth of 18 GHz with half-wave voltage 5V at a wavelength of 1.55 pm could be obtained even though the electrode is not very thick. When the requirement of half-wave voltage is not very critical, a bandwidth of more than 100 GHz can be obtained.     

超软X射线流气式正比计数管

介绍了一种用于测量183～933eV超软X射线的圆柱形、侧窗式、流气式正比计数管,工作气体是0.11MPa的P-10气体或氦气-丙烷混合气体。计数管内径为φ25mm,直径为φ0.3mm的入射窗是由厚度80～90μgcm~2聚乙烯甲醛制成的。该计数管的特点:(1)薄窗,对软X射线透过率高。(2)流气式,工作寿命长。(3)能量分辨率好。(4)计数率高(1×10~(14)个/s)。(5)可测能区宽(0.183～10keV)。(6)可以方便更换窗膜材料、厚度及窗口直径。近几年来该计数管已经为高强度低能X光源提供较好监测。