Characterization of ZnO:Si nanocomposite films grown by thermal evaporation

Composite films were fabricated by co-evaporating Zinc Oxide with Silicon at room temperatures. The resulting films had polycrystalline grains of Zinc Oxide whose grain size were few hundred nanometers, embedded in the silicon matrix. These nanocrystalline grains of ZnO showed good photoluminescence emission at 520 nm along with a photoluminescence emission at 620 nm being contributed by the silicon background. Thus, the nanocomposite films gave a board emission, making it a potentially useful candidate for optoelectronic devices. The photo-luminescent property of the films was found to be stable since the homgenously dispersed ZnO nanocrystals were not allowed to agglomerate by the silicon background.     

Synthesis,Characterization and X‐ray Crystal Structure of a Chromium(III) Complex Obtained from a Proton‐Transfer Compound Containing 1,10‐Phenanthroline‐2,9‐dicarboxylic Acid and 2,6‐Pyridinediamine

The novel 1,10‐phenanthroline‐2,9‐dicarboxylate containing Chromium(III) complex, (pydaH)[Cr(phendc)₂] · 5H₂O, was synthesized using proton‐transfer compound LH₂, (pydaH₂)²⁺(phendc)^2?, (pyda: 2,6‐pyridinediamine; phendcH₂: 1,10‐phenanthroline‐2,9‐dicarboxylic acid) and thoroughly characterized by elemental analysis, IR spectroscopy, X‐ray crystallography and cyclic voltammetry. The complex crystallizes in the monoclinic space group P2₁/n with four formula units in the unit cell. The unit cell dimensions are: a = 13.962(3) Å, b = 14.529(3) Å, c = 16.381(3) Å and β = 106.691(4)°. In this complex, 1,10‐phenanthroline‐2,9‐dicarboxylate acts as a tridentate ligand and the lattice is composed of anionic hexacoordinated complex, [Cr(phendc)₂]^?, 2,6‐pyridiniumdiamine counter ion, (pydaH)⁺, and five lattice water molecules. Crystallographic characterization revealed that the resulting supramolecular structure is strongly stabilized by complicated network of hydrogen bonds between the crystallization water molecules, counter ion and both coordinated and uncoordinated carboxylate groups. There is no relevant π‐π interaction for this anionic complex between pyda or phendc moieties. The electrochemical studies indicated over potential for both the cathodic and anodic peaks of the complex with respect to the free Cr³⁺ ion, as a consequence of the energy requirement for rearrangement of the ligand at electrode surface.     

Ion Pairing,H‐bonding,and π‐π Interactions in Cobalt(II) Compound Containing Guanidinium Counter Ion

A novel proton transfer compound, (GH)₂(phendc), ( 1 ), was synthesized from the reaction of 1,10‐phenanthroline‐2,9‐dicarboxylic acid, phendcH₂, and guanidine hydrochloride, (GH)(Cl), (G: guanidine). The characterization was performed using IR, ¹H and ¹³C NMR spectroscopy. The cobalt(II) compounds were synthesized using proton transfer compounds containing guanidinium counter ion. These proton transfer compounds are (GH)₂(phendc), and (GH)₂(pydc) (pydcH₂: 2,6‐pyridinedicarboxylic acid). The chemical formulae and space groups are (GH)₂[Co(phendc)₂]·4H₂O, (2) , and (GH)₂[Co(H₂O)₆][Co(pydc)₂]₂, P2₁/n (3) . Non‐covalent interactions such as ionpairing, hydrogen bonding and π‐π stacking are discussed.     

New Methylene Blue (NMB) Encapsulated in Mesoporous AlMCM‐41 Material and Its Application for Amperometric Determination of Ascorbic Acid in Real Samples

New methylene blue (NMB) dye incorporated into AlMCM‐41 surfactant‐free and hybrid surfactant‐AlMCM‐41 mesophase. UV‐vis evidence shows that new methylene blue dye protonated in both cases of zeolites. New methylene blue is electroactive in zeolites and their electrochemical activity has been studied by cyclic voltammetry and compared to that of NMB in aqueous solutions. New methylene blue molecules are not released to the solution during CV measurements and are accessible to H₃O⁺ ions. The presence of surfactant affects the kinetics of the redox process through proton ions diffusion. The midpoint potentials (E_m) values show that new methylene blue dye incorporated into AlMCM‐41 can be reduced easily with respect to solution new methylene blue. New methylene blue interacting with surfactant polar heads and residual Br^? ions as a results, it shows a couple of peaks in high potential with respect to new methylene blue solution. The electrode made with methylene blue‐AlMCM‐41 without surfactant was used for the mediated oxidation of ascorbic acid. The anodic peak current observed in cyclic voltammetry was linearly dependent on the ascorbic acid concentration. The calibration plot was linear over the ascorbic acid concentration range 1.0×10^?5 to 5.0×10^?4 M. The detection limit of the method is 1.0×10^?5 M, low enough for trace ascorbic acid determination in various real samples.     

Robust supply chain network design with service level against disruptions and demand uncertainties: A real-life case

We have developed a stochastic mathematical formulation for designing a network of multi-product supply chains comprising several capacitated production facilities, distribution centres and retailers in markets under uncertainty. This model considers demand-side and supply-side uncertainties simultaneously, which makes it more realistic in comparison to models in the existing literature. In this model, we consider a discrete set as potential locations of distribution centres and retailing outlets and investigate the impact of strategic facility location decisions on the operational inventory and shipment decisions of the supply chain. We use a path-based formulation that helps us to consider supply-side uncertainties that are possible disruptions in manufacturers, distribution centres and their connecting links. The resultant model, which incorporates the cut-set concept in reliability theory and also the robust optimisation concept, is a mixed integer nonlinear problem. To solve the model to attain global optimality, we have created a transformation based on the piecewise linearisation method. Finally, we illustrate the model outputs and discuss the results through several numerical examples, including a real-life case study from the agri-food industry.     

Rheology for deposition control of polymer-amended oil sands tailings

Mineral slurries may be dewatered to the point that they manifest non-Newtonian behavior. Many such slurries exhibit both thixotropic and hysteric behavior in their rheology, which has important implications for managing their deposition in tailings impoundments. This paper characterizes the rheology of a mineral slurry with relatively high clay content, which is treated with a high molecular weight anionic polymer to induce flocculation. The rheology exhibits viscosity bifurcation behavior similar to pure clay, including shear history-dependent apparent yield stress values. Rheometry results are presented including stress growth, controlled stress tests, and oscillatory rheometry, all using a vane fixture. The measured rheology is modeled using a previously published viscosity bifurcation model that accounts for hysteresis in the apparent yield stress. The rheology results are used semi-quantitatively to explain deposition rate-dependent behavior seen in flume tests. The geometry of tailings in flume tests with relatively slow deposition is affected by the presence of deposited tailings that have come to rest sufficiently to manifest the yield stress of initially fully structured material, rather than the lower value yield stress that characterizes when the material first comes to a stop. This full recovery of the yield stress seems to be particularly important to managing surface deposition, as zones of tailings that have stopped moving substantially steepen the slope of deposits near the deposition point.     

A multi-shift vehicle routing problem with windows and cycle times

In many applications of the vehicle routing problem with time windows (VRPTW), goods must be picked up within desired time frames. In addition, they have some limitations on their arrival time to the central depot. In this paper, we present a new version of VRPTW that minimizes the total cycle time of the goods. In order to meet the time windows and also minimize the cycle time, the courier’s schedule is allowed to vary. An algorithm, named VeRSA, is proposed to solve this problem. VeRSA employs concepts of scheduling theorems and algorithms to determine feasible routes and schedules of the available couriers. We prove a theoretical lower bound that provides a useful bound on the optimality gap. We also conduct a set of numerical experiments. VeRSA obtains a feasible solution faster than solving the MIP. The optimality gap using our proposed lower bound is smaller than the gap found with the standard LP relaxation.     

Styrene-containing Phosphine-sulfonate Ligands for Nickel-and Palladium-catalyzed Ethylene Polymerization

A series of phosphine-sulfonate ligands bearing 2-, 3-and 4-vinylphenyl on the phosphorus atom were designed, synthesized,characterized and investigated in Ni-and Pd-catalyzed ethylene polymerization. The structure of the phosphine-sulfonate Pd complex bearing2-vinylphenyl on the phosphorus atom showed 2,1-insertion for the 2-vinyl group. The phosphine-sulfonate Ni complex bearing 2-vinylphenyl resulted in significantly increased thermal stability and polyethylene molecular weights(Mn=3.69×104 g·mol-1 at 80 °C) versus the counterparts bearing 3-/4-vinyl groups as well as previously reported phosphine-sulfonate Ni complexes bearing bulky biaryl substituents.     

Simultaneous Determination of the Endogenous Free ��-Lipoic Acid and Dihydrolipoic Acid in Human Plasma and Erythrocytes by RP-HPLC with Electrochemical Detection

A highly sensitive, precise, and accurate reversed-phase high-performance liquid-chromatography/electrochemical detection method for simultaneous determination of the endogenous free ??-lipoic acid and dihydrolipoic acid in biological matrices was developed and validated. The two analytes were extracted from the samples with acetonitrile/10% metaphosphoric acid solution_(aqueous) (50/50 v/v). To determine the total lipoic acid, samples were treated with tris(2-carboxyethyl)phosphine solution in phosphate buffer, pH 2.5 with 85% orthophosphoric acid prior to deproteination. The two analytes were separated on a C₁₈ (150 × 4.6 mm, 5 ??m) analytical column using acetonitrile-50 mM phosphate buffer, pH 2.5 with 85% orthophosphoric acid (35/65 v/v) as the isocratic mobile phase pumped at a flow rate of 2.0 mL min^?1 at the column oven temperature of 35 °C. The column eluents were monitored at a potential of 0.9 V. These analytes were efficiently resolved in <7 min. The present method was sufficiently robust and specific for simultaneous determination of the two analytes and demonstrated acceptable values for linearity (r ² = 0.999 in the range of 0.1?C500 and 0.25?C1,000 ng mL^?1 for ??-lipoic acid and dihydrolipoic acid, respectively), recovery (>97%), precision (RSD% <2), and sensitivity (on column limit of detection, 150 and 375 fg for ??-lipoic acid and dihydrolipoic acid, respectively and limit of quantification: 0.5 and 1.25 pg for ??-lipoic acid and dihydrolipoic acid, respectively), indicating that the proposed method was more sensitive, precise, economical, and versatile, and has higher throughput than the previously reported methods for simultaneous determination of the two analytes.     

Comparative evaluation of amphotericin B binding to the native and modified forms of rice lipid-transfer protein: a possible perspective on improving the drug-binding affinity and specificity

Plant non-specific lipid-transfer proteins (nsLTPs) are small basic proteins which transport phospholipids between different cell membranes. They are classified, based on their molecular weight, into two subfamilies: nsLTP1 (9 kDa) and nsLTP2 (7 kDa). These proteins have received an increasing research interest as efficient drug carriers in drug delivery systems. However, there have been few studies conducted on their drug-binding characteristics. The present study aims to comparatively evaluate binding of amphotericin B (AmB, an antifungal drug) to the native and modified forms of rice nsLTP1 and to assess possible applications in drug delivery methods. The LTP1 was purified and then interaction of AmB with the native and modified forms of protein was investigated with various spectroscopic methods. The results showed that the AmB–LTP binding is associated with quenching of the protein intrinsic fluorescence. Furthermore, as temperature of the medium increased, the stability of the AmB–native LTP complex decreased, whereas the stability of the AmB–modified LTP increased. Analysis of the thermodynamic parameters of the AmB–protein complexes and extrinsic fluorescence data indicated that the lysine modification caused a change in the intermolecular interactions between the protein and AmB as well as in the protein surface hydrophobicity (PSH). Furthermore, Dixon plot showed that AmB inhibits ANS binding especially in the AmB–modified RLTP binding. Findings of the current study highlighted the drug-binding characteristics of the modified form of LTP necessitating further studies to profoundly evaluate the characteristics of its mutant forms.