D-π-A型四硫富瓦烯衍生物的合成及其性能研究

<正>作为很强的有机电子给体,四硫富瓦烯能够在低电位被可逆氧化,失去一个或两个电子生成相应的正一价阳离子自由基或正二价阳离子．近年来它在众多领域显示出日益重要的作用．本论文设计合成了一系列具有D-π-A和A-π-D-π-A结构的四硫富瓦烯 (TTF)衍生物,系统研究了它们在基态发生分子内电荷转移的可能,并利用外界刺激改     

铁基超细粒子催化剂结构与还原行为的Mssbauer谱研究

铁基超细粒子催化剂具有优良的F-T反应性能。本工作利用原位Mssbauer谱辅以XRD技术研究了含有钾助剂的F-T合成铁基超细粒子催化剂的结构与还原行为,考察了催化剂组成和第二金属组分(Mn,Zn,Mg)的影响。“纯”铁超细粒子催化剂在氢气中很容易经Fe_3O_4还原为零价铁。第二金属组分的引入,一方面阻碍了催化剂的还原,另一方面稳定了Fe~(2+)的存在而使其成为还原的主要中间相,这有利于反应条件下形成类尖晶石结构的活性相。对于Fe-Mn催化剂,上述效应随锰含量的增加而更趋显著。铁基超细粒子催化剂在氢气中的还原能力依“纯”Fe>Fe-Zn>Fe-Mn>Fe-Mg的顺序递减,这在一定程度上反映了铁与第二金属组分之间相互作用的强弱。     

铁／锌催化剂的物相结构及其还原行为的穆斯堡尔谱研究

以Mossbauer谱为手段,研究了用于F-T合成的Fe/Zn催化剂的物相结构,并考察了组成及制备方法的影响,同时还对其还原、碳化行为进行了探讨.发现锌对铁的还原有抑制作用,它能够稳定二价铁不被进一步还原.研究还表明,我们所研制的Fe/Zn催化剂是一种高分散度的铁锌化合物,室温下具有超顺磁特性.     

电化学斑图中空间耦合的时空动力学

斑图是在空间或时间上具有某种规律性的非均匀宏观结构,普遍存在于自然界,事实上大多数电化学体系在适当参数范围内也可以形成各种电化学斑图。本文介绍了电化学斑图中空间耦合的三种方式,重点总结了在不同机理作用下可能出现的斑图种类,并简述了电化学斑图模拟方面的发展。     

左炔诺孕酮的荧光光谱分析法

用荧光光谱法研究了硫酸介质中左炔诺孕酮与 β_环糊精主客体包络反应的条件及机理 ,以及溴化十六烷基三甲铵的增敏作用 ,提出了在水溶液中测定左炔诺孕酮的荧光光谱分析法;该法灵敏度高 ,检出限低(3.20×10 -8mol/L) ,荧光强度与左炔诺孕酮浓度在6.40×10 -8～3.20×10 -6mol/L范围内呈良好线性关系 ,方法的相对标准偏差为0.9 %(n=5)。     

聚氯乙烯结构缺陷和热不稳定性之间关系的研究 2.各种结构缺陷含量和热脱氯化氢速率之间的关系

 本工作采用溴加成法、酚解法、FTIR法及臭氧裂解法分别测定了五种不饱和蒸气压下聚合的PVC样品(u-PVC)和五种商品PVC样品(s-PVC)的总双键、总不稳定氯、孤立双键和内部双键的含量.通过研究结构缺陷和PVC的平均分子量及脱HCl速率的相互关系,揭示了不饱和总双键值,总不稳定氯和孤立双键含量彼此的相关性是建立在它们分别与1/M_n的相关性基础之上,从而得出了这三种定量值测得的主要都是端基烯丙基氯结构.根据三者对脱HCl速率的良好线性相关性,首次提出了端基烯丙基氯结构在HCl催化作用下异构化成内部烯丙基氯从而成为脱HCl速率主要原因的机理.     

粘质沙雷氏菌脂肪酶的固定化及催化拆分反式3-(4’-甲氧苯基)缩水甘油酸甲酯

 对粘质沙雷氏菌脂肪酶进行了固定化研究,确定硅藻土和环氧树脂Eupergit C是较好的固定化载体. 固定化后酶的热稳定性、 pH稳定性及储存稳定性均明显提高. 以Eupergit C共价固定的脂肪酶,其操作稳定性比硅藻土吸附酶好,重复使用10批次后,剩余酶活力还有50%左右,戊二醛交联对Eupergit C固定化酶稳定性的提高没有明显效果,而硅藻土吸附酶经戊二醛交联后稳定性有所提高,经5批次反应后剩余酶活力还有50%. 使用交联后的硅藻土固定化酶(1 g, 200 U), 在两相搅拌反应器(工作体积200 ml, 甲苯∶水体积比=1)中对地尔硫卓手性前体(±)-反式3-(4’-甲氧苯基)缩水甘油酸甲酯((±)-MPGM)(有机相浓度为0.5 mol/L)进行了催化拆分,经5批次反应后,共得纯(2R,3S)-(-)-MPGM 18.6 g, 产品光学纯度(对映体过量)>99%, 总收率为37.2%.     

甲醇在超临界环已烷中形成簇团的Monte Carlo初探

用Ｍｏｎｔｅ Ｃａｒｌｏ方法研究了甲醇－环己烷体系的微观结构随压力（密度）的变化情况，结果表明，在临界区域甲醇分子的聚集最为明显，形成的甲醇团簇尺寸最大，溶剂分子在甲醇周围的局部密度则在低于临界区或亚临界区较大。     

Ab initio study of the complexes of halogen-containing molecules RX (X=Cl, Br, and I) and NH3: towards understanding the nature of halogen bonding and the electron-accepting propensities of covalently bonded halogen atoms

Ab initio calculations have been performed on a series of complexes formed between halogen-containing molecules and ammonia to gain a deeper insight into the nature of halogen bonding. It appears that the dihalogen molecules form the strongest halogen-bonded complexes with ammonia, followed by HOX; the charge-transfer-type contribution has been demonstrated to dominate the halogen bonding in these complexes. For the complexes involving carbon-bound halogen molecules, our calculations clearly indicate that electrostatic interactions are mainly responsible for their binding energies. Whereas the halogen-bond strength is significantly enhanced by progressive fluorine substitution, the substitution of a hydrogen atom by a methyl group in the CH(3)X...NH(3) complex weakened the halogen bonding. Moreover, remote substituent effects have also been noted in the complexes of halobenzenes with different para substituents. The influence of the hybridization state of the carbon atom bonded to the halogen atom has also been examined and the results reveal that halogen-bond strengths decrease in the order HC triple bond CX > H(2)C=CHX approximately O=CHX approximately C(6)H(5)X > CH(3)X. In addition, several excellent linear correlations have been established between the interaction energies and both the amount of charge transfer and the electrostatic potentials corresponding to an electron density of 0.002 au along the R-X axis; these correlations provide good models with which to evaluate the electron-accepting abilities of the covalently bonded halogen atoms. Finally, some positively charged halogen-bonded systems have been investigated and the effect of the charge has been discussed.     

Oxidative coupling of methane over Na-Mn-W/SiO2 catalyst at higher pressure

Na-Mn-W/SiO₂ catalysts were prepared and their catalytic performance for oxidative coupling of methane (OCM) was evaluated in a stainless-steel microreactor at elevated pressure. The results show that a CH₄ conversion of 15.1% with a C₂₊ selectivity of 71.8% was obtained under 750^oC, 1.0×10⁵h^-1 GHSV, CH₄/O₂ ratio of 8 and 1.0 MPa. Moreover, 17.3% CH₄ conversion with 51.6% C₂ selectivity and 23.6% C₃-C₄ selectivity was obtained under 750^oC, 2.0×10⁵h^-1 GHSV, CH₄/O₂ ratio of 8 and 1.0 MPa.