Formation of polyketone particle structure by hexafluoroisopropanol solvent evaporation and effects of plasticizer addition

Few solvents are capable of dissolving polyketones (PKs). 1,1,1,3,3,3‐Hexafluoro‐2‐propanol (hexafluoroisopropanol, HFIP) is a better solvent than trifluoroethanol and m‐cresol. When HFIP was evaporated from a PK/HFIP solution, a porous cast‐film with a microparticle structure was formed because the isotactic PKs adopted a helical conformation, and convection during evaporation of the high polarity and low‐boiling‐point HFIP caused aggregation and rolling of the polymer molecules. The addition of plasticizer suppressed particle formation, improving the surface structure and mechanical properties of the film. In particular, the dielectric properties of the film improved significantly. This will enable PKs, which are rigid insulating materials, to be used as dielectric materials, broadening their range of applications. © 2014 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2014 , 52, 887–892     

A nickel oxide nanoflakes/reduced graphene oxide composite and its high-performance lithium-storage properties

Journal of Solid State Electrochemistry - Since conventional graphite-based anode possesses a low capacity, seeking for high-capacity anode candidates becomes significant for constructing emerging...     

无需热处理高炉渣微晶玻璃的制备与表征

采用熔融法熔制具有金色星点的微晶玻璃,制备过程无需热处理.利用DSC-TG、XRD、SEM、EDS、TEM、BSE、FTIR和热膨胀研究该微晶玻璃配合料的高温熔制过程和不同熔制温度、保温时间对微晶玻璃晶体含量、显微结构和性能的影响.研究表明:配合料在850℃生成钙铝黄长石晶体并在1010℃逐渐转变为辉石,配合料在1200℃时大量熔化,仅含有熔点较高的正方铬铁矿石,随着温度的升高,正方铬铁矿溶解,玻璃液中析出绿铬石晶体;晶体含量随着熔制温度的升高而减少,随着保温时间的延长而增加.     

Hexagonal cobalt oxyhydroxide nanoflakes/reduced graphene oxide for hydrogen peroxide detection in biological samples

Analytical and Bioanalytical Chemistry - Abnormal concentration of hydrogen peroxide (H2O2) in blood plasma and cells may lead to several diseases. Thus, it is important to develop a selective and...     

细胞松弛素B阻断微核法鉴定男性个体辐射敏感性的方法初探

初步研究了男性个体辐射敏感性的鉴定方法及标准。采集50名男性志愿者的外周血，分别给予不同剂量X射线照射，采用细胞松弛素B阻断双核法测定微核率(MNF)，通过二阶多项拟合法，绘制微核剂量效应选项中心标准曲线，将个人微核剂量效应曲线与标准曲线比对后判断个体辐射敏感性。 $0.0\sim2.5 $ Gy剂量范围内，剂量效应二阶多项拟合的中心方程为(MNF=0.014 7+0.036 2D+0.023 1D 2， r=0.726)。50名志愿者中，辐射敏感的有13人，辐射抗性的有14人，基本符合正态分布。Spearman秩和相关分析结果显示，MNF在各个辐射剂量点与辐射敏感性均存在正相关,与辐射抗性呈负相关,MNF随剂量增加而增加。本研究初步建立了“以线代点”男性个体辐射敏感性鉴定方法,并发现男性外周血淋巴细胞的本底微核率与个体辐射敏感性呈正相关。     

Identification of Flavonoids as Putative ROS-1 Kinase Inhibitors Using Pharmacophore Modeling for NSCLC Therapeutics

Non-small cell lung cancer (NSCLC) is a lethal non-immunogenic malignancy and proto-oncogene ROS-1 tyrosine kinase is one of its clinically relevant oncogenic markers. The ROS-1 inhibitor, crizotinib, demonstrated resistance due to the Gly2032Arg mutation. To curtail this resistance, researchers developed lorlatinib against the mutated kinase. In the present study, a receptor-ligand pharmacophore model exploiting the key features of lorlatinib binding with ROS-1 was exploited to identify inhibitors against the wild-type (WT) and the mutant (MT) kinase domain. The developed model was utilized to virtually screen the TimTec flavonoids database and the retrieved drug-like hits were subjected for docking with the WT and MT ROS-1 kinase. A total of 10 flavonoids displayed higher docking scores than lorlatinib. Subsequent molecular dynamics simulations of the acquired flavonoids with WT and MT ROS-1 revealed no steric clashes with the Arg2032 (MT ROS-1). The binding free energy calculations computed via molecular mechanics/Poisson-Boltzmann surface area (MM/PBSA) demonstrated one flavonoid (Hit) with better energy than lorlatinib in binding with WT and MT ROS-1. The Hit compound was observed to bind in the ROS-1 selectivity pocket comprised of residues from the β-3 sheet and DFG-motif. The identified Hit from this investigation could act as a potent WT and MT ROS-1 inhibitor.     

Fabrication of three-component hydrogen-bonded covalent-organic polymers for ciprofloxacin decontamination from water: adsorption mechanism and modeling

A three-component hydrogen-bonded covalent organic polymer, namely JLUE-H_COP-66, was fabricated via a facile multiple-linking-site solvothermal approach to overcome the weakness of poor function complexity and limited structure diversity of the pure covalent skeletons. The as-prepared JLUE-H_COP-66 polymers were employed to decontaminate ciprofloxacin (CIP), a popular F-quinolones (FQNs) antibiotic, from water and exhibited satisfactory adsorption performance. Specifically, JLUE-H_COP-66 polymers have high adsorption capacity with the maximum contribution of 111.1 mg/g according to the Langmuir model, good antiinterference to NaCl salts, and excellent regeneration property. The pH-dependent experiment results signified the probably dominated mechanism of electrostatic interaction. In addition, adsorption studies and structural characterization in combination illustrated that the pore-filling effect, hydrogen bonding formation might also govern the whole process, accompanied by electrostatic interaction, dipole-dipole complexation, π-π EDA interaction, and hydrophobic-hydrophobic interaction besides. Moreover, electrostatic potentials, as well as the frontier molecular orbital distributions (HOMO and LUMO) of CIP and JLUE-H_COP-66 fragment, were calculated using density functional theory to theoretically support the research. Furthermore, the response surface methodology (RSM) according to the CCD matrix was used to not only study the interactive and cooperative effects of initial CIP concentration, initial pH, ionic strength along with JLUE-H_COP-66 dosage on CIP removal using JLUE-H_COP-66 but also optimize the operation conditions. Given the peculiar structure and functional feature, this work could hopefully bring H_COPs into the practical applications of such challenging and persistent ciprofloxacin potent removal with further large-scale efficiency.