纳米Ag/TiO_(2)纳米管阵列基底构建及表面增强拉曼散射光谱检测与降解盐酸四环素北大核心CSCD

将阳极氧化与光还原法结合,在TiO_(2)纳米管阵列(TiO_(2)NTAs)表面修饰Ag纳米粒子,获得一种均匀有序、稳定性高且可循环的TiO_(2)NTAs/Ag活性基底。采用X射线粉末衍射(XRD)、X射线光电子能谱(XPS)、紫外可见漫反射光谱(UV-Vis DRS)、表面增强拉曼散射光谱(SERS)和扫描电子显微镜(SEM)等手段对TiO_(2)NTAs/Ag的组成和结构进行了表征。进一步研究了该TiO_(2)-NTAs/Ag阵列对盐酸四环素(TC-HCl)的SERS响应,结果表明,该复合基底对TC-HCl具有较高的检测灵敏度,在水中检测限可达1×10^(−14) mol/L,而TiO_(2)-NTAs与Ag之间的协同效应对其检测性能的提高起着关键作用。此外,TiO_(2)NTAs/Ag基底在光照下对TC-HCl展示了优异的降解活性,且至少可循环使用8次。表明该TiO_(2)NTAs/Ag基底在环境中有机污染物的SERS检测和降解领域具有潜在的应用前景。     

Thermal- and Light-driven Metathesis Reactions Between Different Diselenides

Thermal- and light-driven diselenide metathesis reactions with different types of diselenides are investigated systematically. Their exchange reaction rates and equilibrium conversions are compared in the aspects of the different diselenide structures, activation conditions and solvents. As a result, the metathesis reactions between diselenide small molecules are demonstrated with high dynamic and sensitive features, which can be broadly tuned by varying the electron affinity and aromaticity of the diselenide substituents and external conditions(e.g., solvent, stimulus mode). The current work thus will not only advance our understanding on diselenide metathesis chemistry, but also promote concrete and impactful studies in selenium-containing materials.     

Development of the Self-doping Porous Carbon and Its Application in Supercapacitor Electrode

The massive discharge of biomass wastes not only causes waste of resources, but also pollutes the environment. Therefore, converting biomass wastes into carbon materials is an effective way to solve the above problems. Here, using biomass waste pig nails as raw materials and K₂CO₃ as chemical activators, the N-doped porous carbon(KPNC) is prepared by direct pyrolysis. As an electrode for supercapacitors, the electrochemical tests of KPNCs showed that they exhibited good electrochemical performance and excellent cycling stability. When the current density is 0.2 A/g, the specific capacitance is up to 344.6 F/g. Moreover, it still maintains 97.6% initial capacitance retention after 2000 cycles at a high current density of 5 A/g. Above exceptional electrochemical performances may be ascribed to an appropriate porous structure(S_micro/S_total=80.31%, V_micro/V_total=76.19%), high nitrogen contents(4.44%, atomic fraction), oxygen contents(9.13%, atomic fraction) as well as small internal resistance. The above experimental results show that the conversion of pig nails to porous carbon can reduce the waste of resources and alleviate environmental pollution.     

Surface Functionalization of PEO Nanofibers Using a TiO2 Suspension as Sheath Fluid in a Modified Coaxial Electrospinning Process

Convenient and integration fabrication process is a key issue for the application of functional nanofibers. A surface functionalization method was developed based on coaxial electrospinning to produce ultraviolet(UV) protection nanofibers. The titanium dioxide(TiO₂) nanoparticles suspension was delivered through the shell channel of the coaxial spinneret, by which the aggregation of TiO₂ nanoparticles was overcome and the distribution uniformity on the surface of polyethylene oxide(PEO) nanofiber was obtained. With the content of TiO₂ increasing from 0 to 3%(mass fraction), the average diameter of nanofibers increased from (380±30) nm to (480±100) nm. The surface functionalization can be realized during the electrospinning process to gain PEO/TiO₂ composite nanofibers directly. The uniform distribution of TiO₂ nanoparticles on the surface of nanofibers enhanced the UV absorption and resistance performance. The maximum UV protection factor(UPF) value of composite nanofibers reaches 2751. This work presented a novel surface-functionalized way for the preparation of composite nanofiber, which has great application potential in the field of micro/nano system integration fabrication.     

固相萃取/超高效液相色谱－串联质谱法测定香辛调料中的曲托喹酚

采用MCX固相萃取柱净化,以超高效液相色谱－串联质谱（UPLC－MS/MS）法建立了香辛调料中曲托喹酚的测定方法。样品采用0.2%酸性乙醇提取,经MCX柱净化浓缩后,在ACQUITY BEH C18色谱柱上以乙腈和0.1%甲酸水溶液为流动相梯度洗脱,UPLC－MS/MS以MRM方式进行定量分析。结果表明,曲托喹酚在0.1～50 ng/mL范围内线性关系良好,相关系数（r）大于0.998,方法的检出限（LOD）为0.2 μg/kg,定量下限（LOQ）为0.5 μg/kg。化合物在不同基质的4个加标水平（0.5、2、10、100 μg/kg）下的回收率为74.5%～98.8%,相对标准偏差（RSD）为3.1%～9.1%。该方法灵敏、准确、可靠,可用于香辛调料中曲托喹酚的测定。     

无溶剂高度分散Ni/MCM-41催化剂的制备及其萘加氢性能

分别用机械研磨无溶剂法、添加柠檬酸无溶剂法制备了Ni/MCM-41催化剂,对所制催化剂进行了分析表征,探究其萘加氢反应性能并与常规浸渍法进行了对比。与常规浸渍法相比,机械研磨无溶剂法所制催化剂的物理性质相近,金属镍分散度和萘加氢性能略有提高;添加柠檬酸无溶剂法则显著提升了催化剂的分散度和萘加氢性能,金属镍分散度由6.9%大幅提高至67.9%,萘加氢性能提高了近1倍。通过红外光谱、紫外光谱和热重分析,提出了添加柠檬酸对无溶剂法制备催化剂性能的促进作用机制。     

整体柱在线净化-液相色谱-高分辨质谱法快速测定牛奶中15种糖皮质激素

将自制的在线固相萃取柱与液相色谱串联四极杆静电轨道离子阱质谱技术相结合,建立了快速测定牛奶中15种糖皮质激素类药物的新方法.样品采用乙腈均质提取2 min,经自制在线固相萃取小柱富集净化,在Waters CORTECS T3(150 mm ×2.1 mm,5μm)分析柱上实现良好分离,外标法定量.15种目标物质量浓度在0.10～100 ng/mL范围内线性关系良好,相关系数均大于0.99;在0.20,0.40,2.0μg/kg3个添加水平下,15种糖皮质激素的回收率在87.1％ ～ 116.0％之间,相对标准偏差(RSD)在3.2％～8.7％(n=6)之间;方法的检出限(LOD,S/N≥3)和定量限(LOQ,S/N≥1O)分别为0.10和0.20μg/kg.该法适用于大批量牛奶中糖皮质激素类药物的快速定性筛查和定量分析.     

含各向异性左手材料的一维Thue-Mores准周期结构的反射带隙

采用传输矩阵法,研究了由各向同性右手材料和各向异性左手材料组成的Thue-Morse准周期结构的反射带隙,分析了入射角、偏振和晶格比例缩放因子对反射带隙的影响.结果表明该结构存在一个全方向反射带隙,该带隙的宽度由TE模的低频带边缘和TM模的高频带边缘决定.当在该结构中插入一层缺陷时,在全方向带隙中出现一条缺陷模.对TE模,缺陷模的位置受入射角的影响很弱,而对TM模,缺陷模的位置随入射角的增大,向高频方向移动.     

含Ti的HMS介孔材料催化剂及其对丙烯环氧化催化性能的研究

分别用水热合成法和气相四氯化钛(TiCl4)接枝法制备了Ti-HMS和Ti/HMS催化剂.表征结果表明,经过气相TiCl4接枝后的样品依然保持HMS(Hexagonal Mesoporous Silica,缩写为HMS)介孔材料特征,钛(Ti)物种主要以四配位的活性位形式存在.经过甲基接枝处理的催化材料,增加了表面的疏水性.丙烯环氧化反应结果表明,SN-Ti/HMS具有更高的催化性能.在2 500 h的稳定试验中,过氧化氢异丙苯(CHP)转化率大于99.0%,环氧丙烷(PO)选择性大于96.0%.研究和优化了环氧化反应工艺条件.采用浓度为30%的CHP为原料,CHP重量空速为1.0 h-1,床层温度为100℃,反应压力为3.0 MPa.     

尼龙6纳米纤维膜的制备及其对己烷雌酚的吸附性能研究

采用静电纺丝设备制备尼龙6纳米纤维膜。用静、动态吸附方法,研究了尼龙6纳米纤维膜对己烷雌酚的吸附性能,考察了吸附时间、初始浓度及介质p H值对尼龙6纳米纤维膜吸附己烷雌酚的影响。结果表明,初始浓度为2mg/L时,尼龙6纳米纤维膜吸附己烷雌酚的过程符合准一级动力学模型;当初始浓度在5~20mg/L范围内,吸附过程符合准二级动力学模型。尼龙6纳米纤维膜吸附己烷雌酚的过程符合Freundlich等温吸附模型。