掺杂电活性离子聚吡咯膜内的电荷传输

用循环伏安法和计时库仑法研究了掺杂亚铁氰化钾离子的聚哟咯膜内的电荷传输问题。实验结果表明，聚吡咯膜内的电荷传递可以处理成电子在膜内的扩散模型，电荷传递速度可以 用电子表观扩散系数（Ｄａｐｐ）来表征。Ｄａｐｐ的大小由聚合物膜的结构、电活怀离子之间的过及对离了在膜中的运动决定。     

Identification of a chemical indicator of the rupture of 1,4-β-glycosidic bonds of cellulose in an oil-impregnated insulating paper system

In this study, headspace gas chromatography/mass spectrometry has been used to assess the volatile by-products generated by the ageing of oil-impregnated paper insulation of power transformers. Sealed-glass ampoules were used to age under oxidative conditions 0.5-g specimens of insulating paper in 9 mL of inhibited mineral oil in a temperature range of 60–120 °C and moisture of 0.5, 1 and 2% (w/w). A linear relationship between one of the oil-soluble degradation by-products, i.e. methanol, and the number of ruptured 1,4-β-glycosidic bonds of cellulose, regardless of the type of paper (ordinary Kraft or thermally-upgraded (TU) Kraft paper), was established for the first time in this field. Ageing at 130 °C of model compounds of the Kraft paper constituents (α-cellulose, hemicellulose and lignin) and two cellulosic breakdown by-products (D-(+)-glucose and 1,6-anhydro-β-d-glucopyranose) confirmed that the α-cellulose degradation was mostly responsible for the presence of this molecule in the system. Furthermore, additional 130 °C-tests with six different papers and pressboard samples under a tight control of initial moisture indicated that at least one molecule of methanol is formed for each rupture of 1,4-β-glucosidic bond of the molecular chains. Stability tests showed that the ageing indicator is stable under the oxygen and temperature conditions of open-breathing transformers. The presence of methanol was detected in 94% of oil samples collected from over than 900 in-service pieces of equipment, confirming the potential for this application. Lastly, the tests have shown that oil-oxidation by-products and TU-nitrogenous agents modify the methanol partitioning coefficients in the paper/oil/air system, which makes their study essential over a range of field conditions encountered by power transformers. Results are presented and discussed in comparison with 2-furfuraldehyde, which is the current reference in the domain.     

Organic–inorganic nanocomposites prepared from fluoro-aramid and silica

Fluoro-aramid-based sol/gel-derived nanocomposites were synthesized by condensing a mixture of 4,4′-(hexafluoro-isopropylidene)dianiline and 1,3-phenylenediamine with terephthaloylchloride (TPC) in dimethylacetamide. TPC was added in slight excess to produce amide chains with carbonyl chloride end groups and then replaced with alkoxy groups using aminophenyltrimethoxysilane to develop bonding with the silica network. Mechanical, dynamic mechanical thermal, water absorption and morphological measurements were carried out on the thin hybrid films. Increase in the tensile strength and modulus was observed as compared to pristine polyamide. The thermal decomposition temperature was found in the range of 400–500 °C. The water absorption was found to be reduced with higher silica content. The glass transition temperature and the storage moduli increased with increasing silica concentration. The maximum increase in the T _g value (345 °C) was observed with 20 wt% silica. Scanning electron microscopy revealed the uniform distribution of silica in the matrix with an average particle size ranging from 8 to 50 nm.     

Correlation between Site ll-Specific Human Serum Albumin (HSA) Binding Affinity and Murine in vivo Photosensitizing Efficacy of Some Photofrin Components

Human serum albumin (HSA) is one of the key components in human blood that may influence drug distribution. As such, it is important to know the affinity of any drug for albumin. Previously, Photofrina mixture of monomeric, dimeric and oligomeric porphyrins, has been subjected to HSA binding studies. However, due to its complex nature, binding studies on Photofrin or other hematoporphyrin derivatives with HSA are inconclusive. In this report, the binding properties of some components (dimers and trimers) of Photofrin® and the relationship between murine photosensitizing efficacy and those binding properties were investigated. The interaction of these porphyrins with HSA was investigated by direct ultrafiltration and fluorescent titration techniques with fluorescent probes such as dansyl-L-proline (DP), which is known to interact selectively with site II on HSA. Porphyrins also were tested for antitumor activity in a mouse model following intravenous administration and exposure to laser light. Together, the results suggest that the photosensitizers that were preferentially bound to site II of HSA were most effective at controlling murine tumor regrowth     

从蓖麻油制取10-羟基癸酸的研究

本文报道了从蓖麻油制取10-羟基癸酸的研究,发现了从蓖麻油制取10-羟基癸酸的新的工艺路线和最佳的工艺条件,用氢氧化钠用量、2-辛醇量、反应时间和反应温度四因子三水平L_9(3~4)进行了正交试验,发现最佳工艺条件是:氢氧化钠(g)/蓖麻油(g):1.25:2-辛醇量(g)/蓖麻油(g):2:反应时间:6h;反应温度:180℃。在这一新的工艺路线和最佳工艺条件下,10-羟基癸酸产率可达75％。     

耐高温α-淀粉酶结合Ca2+的研究

测定了耐高温α-淀粉酶分子中含10个Ca2+,脱钙酶逐量补钙后的活力及稳定性研究表明:酶分子中前8个Ca2+参与酶的催化作用,后2个Ca2+抖对酶结构起稳定作用.脱钙酶加钙后室温下的荧光光谱和CD谱表明:酶的构象虽有变化,但不显著,说明酶的构象对ca2+的依赖性很小.脱钙酶结合不同数目的Ca2+,于90℃加热15 min后,测其荧光光谱,结果表明,结合10个Ca2+时,酶保持最大的稳定构象;CD谱表明脱钙酶加热时仍具有一定的螺旋结构.这再次说明,酶的构象对ca2+依赖性较低.     

钾（Ⅰ）（苯并－15－冠－5）新型配合物的合成及性质

在非水溶剂中合成了苯并－１５－冠－５与碘化钾、硫氰化钾及苦味酸钾形成的三种新型固体配合物，并进行了有关物理、化学性质表征．结果表明，钾（Ⅰ）离子不仅易与苯并－１５－冠－５形成常见的１：２夹心式配合物，而且还能生成稳定的１：１型固体配合物．     

琼脂凝胶中形成铬酸铅周期性沉淀的机理研究

选择硝酸铅和铬酸钾作为相互扩散的反应物以形成铬酸铅在琼脂凝胶中的周期性沉淀．分别在光照和黑暗中对六种不同浓度的硝酸铅溶液进行了实验．根据实验现象对周期性沉淀的形成提出了可能的机理．认为光辐射可使铬酸铅部分电离，从而减慢了胶核成长速率，有利于汇聚成带．     

水中痕量酚的富集和紫外分光光度测定法的研究

本文研究了用微型树脂柱快速富集,分离,紫外分光光度测定水中痕量酚的方法。结果表明,以GDX-502为吸附剂,水样pH为1～3并含0.2mol/L氯化钠,以每分种15～20ml的速度通过吸附柱,以热的1％氢氧化钠水溶液为淋洗剂时,在291nm处测定苯酚的回收率为89～98％。此外探讨了干扰物的消除方法。吸附柱对苯酚的富集倍数达300倍,最低检测限为0.001ppm。方法精密度为0.3(％),相对标准偏差为3.18％。本法对实际水样进行了测定。结果满意。     

喹喔啉—2,3—二甲酰胺与3d过渡金属配合物的合成及性质研究

首次合成了喹喔啉－２，３－二甲酰胺（Ｑｘｄａ）与３ｄ过渡金属的三种固体配合物：Ｍ（Ｑｘｄａ）２ｃｌ２（Ｍ＝Ｃｏ（Ｉ），Ｎｉ（Ｉ），Ｃｕ（Ⅱ）。通过元素分析，摩尔电导，红外光谱，电子光谱，磁化率，热分析等手段对配合物的组成和性质进行了研究。