微波吸收法研究Mn,Cu掺杂对ZnS:Mn,Cu光生载流子复合过程的影响

采用微波吸收法，测量了ZnS:Mn,Cu粉末材料受到超短脉冲激光激发后，其光生电子和浅束缚态电子的衰减过程.发现Mn,Cu的浓度对导带电子的寿命有明显的影响，提高掺杂浓度会使光生电子的寿命大大缩短，还研究了掺杂浓度对光致发光强度的影响. 关键词： 发光材料 硫化锌 光电子 微波吸收技术     

Writing Fiber Grating of Different Wavelength Using the Same Phase Mask

Chirped fiber grating was used in dispersion compensator. We tried to use the same phase mask to write fiber grating of different wavelength with two methods to reduce the price of the fiber grating.     

Reactivities of tetraalkyltin complexes toward Pt/HY zeolite

Tetraalkyltin complexes, SnR₄ (R = Me, Et, Pr, Bu) could react with Pt/HY at 193, 243, 273 and 333 K, respectively. The reactions occurred on the surface of the zeolite and the organotin grafted zeolites were characterized in detail. The framework and the microporous structure of the grafted Pt/HY zeolites were retained. However, the modified zeolites showed better size selectivity in the absorption of hydrocarbons.     

Peritectic phase growth in directionally solidified Cu-70% Sn alloy

The growth mechanism of the peritectic η phase involving the peritectic reaction and peritectic transformation in Cu-70%Sn alloy was investigated under directional solidification. The results show that a major growth mechanism in thickening of the peritectic η-layer is not the peritectic reaction but the peritectic transformation. The transformation temperature and isothermal time play crucial roles in determining the volume fraction and the thickness of the peritectic η phase. With the increase of the temperature and isothermal time, the volume fraction of the peritectic η phase increases. The regressed data show that the relationship between the thickness of η phase (Δx) and the transformation temperature (T) meets the following equation In Δx=6.5−1673 1 / T. Additionally, there exists a relationship between the thickness of the η phase (Δx) and the isothermal time (t) at the 9 mm solidification distance below the peritectic reaction interface, Δx=0.72t ^1/2, which is consistent with the theoretical model. Supported by the National Science Foundation of China (Grant No. 50395102)     

高精度CCD尺寸自动检测系统的光学系统设计

介绍测量精度为±０．００３ｍｍ的ＣＣＤ尺寸检测系统的光学系统设计特点及远心物镜设计原理，并给出了测试结果。     

高频单线圈双调谐NMR单晶探头的研制

本文报道了一种测角单晶NMR探头。该探头采用单线圃双调谐电路,工作频率在90MHz-110 MHz连续可调,可进行交叉极化大功率去耦实验。文中提出了一种简单而有效的测角装置,可使单晶绕三个互相垂直轴转动实现单晶的NMR测量。作为典型的应用例子,本文利用该探头实现了单晶DGO(2NH₂CH₂COOH·H₂C₂O₄)屏蔽张量的测量。     

平衡规划问题的熵函数方法及其在混合交通流中的应用

将参变极值问题的极大熵函数方法应用到求解平衡规划问题中,通过先验分布信息和Kullback熵概念,给出了平衡规划问题基于Kullback熵表示的熵函数求解方法,并将平衡规划的极大熵函数方法应用于求解混合交通平衡分配问题．     

Solvothermal Synthesis of Molybdenum Disulfide Hollow Spheres Modified by Cyanex 301 in Water–Ethanol Medium

Hollow spherical molybdenum disulfide has been successfully synthesized via a solvothermal method using Cyanex 301 as sulfur source and modification agent. The hollow spheres are characterized by transmission electron microscopy, scanning electron microscopy, X-ray diffraction and Energy-Dispersive X-ray analysis. The influences of reaction conditions are also discussed while a mechanism is proposed to explain the formation of the peculiar morphology.     

利用富铈混合稀土改善工业纯铝中富铁相形貌的研究

利用金相分析方法研究了富Ce混合稀土变质对含不同Fe量的工业纯铝的组织和其中富铁相形貌的影响。试验结果表明,随着Fe含量的增加,富铁相由弥散细小的颗粒状向短棒状、长针状转变;富Ce混合稀土变质使铝中的富铁相由长针状变为弥散细小的颗粒状。随着稀土含量的增加,-αAl晶粒逐渐细化,富铁相尺寸及数量逐渐减小。添加0.5%稀土时,-αAl晶粒细化效果最佳,而且富铁相呈细小颗粒状均匀分布在-αAl基体的晶界处。本文还对稀土改善富铁相的机制进行了分析。     

Dimensional variation in production of high-aspect-ratio micro-pillars array by micro powder injection molding

Micro powder injection molding (μPIM) is one of the potential processes for the mass production of metallic microstructures and micro components. Here, μPIM is the miniaturization of conventional PIM, which involves four processing steps: mixing, injection molding, debinding and sintering. This paper looks into the feasibility and effectiveness of μPIM as a key mass production process for the fabrication of metallic micro components. For it to be an effective re-production process, it is imperative to examine how well parts can be duplicated/fabricated from a master mold. In this work, the dimensional variation of high-aspect-ratio micro-pillars arrays, in particular the dimensional shrinkage, global warpage, and surface roughness at each stage of the μPIM process for a range of molding pressures, are quantified and compared in detail. The sensitivity of the dimensional variation of the microstructures to the packing pressure is reported. The mechanism behind the dimensional variation is analyzed. PACS 81.20.Ev; 81.20.Hy; 81.70.Fy; 07.60.Ly; 81.05.-t