原位氧化还原沉淀水热合成法制备LixMn2O4尖晶石

Li xMn2O4尖晶石是新一代的锂离子二次电池正极材料 [1], 其合成方法对材料的电化学性质影响很大[2].常规合成大多采用高温固相反应法, 此法具有反应温度高, 反应时间长, 容易产生缺陷和产物不纯净等缺点, 导致所合成的锂离子二次电池正极材料的性能较差. 目前用水热合成法制备电池正极材料Li xMn2O4尖晶石尚未见文献报道. 本文在常规水热合成法的基础上采用原位氧化还原沉淀水热合成法 [3]制备前驱物, 该法合成条件更温和, 而且使材料的综合性能得到了改善和提高.      

Synthesis and Crystal Structure of a Novel 1D Coordination Polymer: [Pr(BYBA)3(H2O)2]·[Pr(BYBA)3(H2O)]

The novel coordination polymer [Pr(BYBA)3(H2O)2]·[Pr(BYBA)3(H2O)] (BYBAH = 2-benzoylbenzoic acid) was yielded by hydrothermal synthesis, determined by single-crystal X-ray diffraction, and characterized by FT-IR and UV-Vis spectra. The crystal crystallizes in the triclinic system, space group P with a = 9.112(3), b = 14.644(5), c = 27.076(11) (A), α = 84.223(3), β = 87.816(4), γ = 88.902(4)o, V = 3592(2) (A)3, C84H60O21Pr2, Mr = 1687.14, Z = 2, F(000) = 1700, Dc = 1.560 g/cm3, μ = 1.419 mm-1, the final R = 0.0485 and wR = 0.1258 for 13035 observed reflections with I＞2((I). The compound contains two different building units, [Pr2(BYBA)6(H2O)4] and [Pr2(BYBA)6(H2O)2]. It is noticeable that [Pr2(BYBA)6(H2O)4] is an isolated binuclear building block, in which the Pr3 ion centers are both located in an eight-coordinated environment. However, in [Pr2(BYBA)6(H2O)2] the Pr3 ion centers are located in a nine-coordinated environment and connected by BYBA ligands to form 1D chains.     

以四硝基铝酞菁为荧光探针测定葡萄糖的荧光分析新方法

建立以四硝基铝酞菁为荧光探针测定葡萄糖的荧光分析新方法。方法基于四硝基铝酞菁苯环上的硝基与葡萄糖发生还原反应,形成铝酞菁的氨基化产物;氨基化铝酞菁具有红区激发和发射的特性,在强酸性介质中可发射较强荧光;体系的荧光强度和葡萄糖的含量呈良好的线性关系,并具有较好的准确性和稳定性。方法用于测定发酵样品中的还原糖,结果满意。     

ω-氟砜基氟烷基格氏试剂的制备及其反应

合成氟烷基酮的通用方法是将全氟烷基金属试剂与羰基类化合物反应。但对于ω位带有官能团的全氟烷基金属试剂的研究,唯一的例子是:     

二氯化-N,N-′-二(3-脱氢松香酰氧-2-羟丙基)四甲基乙二胺的合成与性能

研究了Gemini表面活性剂中疏水"尾巴"结构对性质的影响,以脱氢松香酸和环氧氯丙烷为原料合成了中间体3-脱氢松香酰氧-2-羟丙基氯,再与四甲基乙二胺反应,得到1种以脱氢松香酰基为疏水链"尾巴"的对称Gemini型双季铵盐阳离子表面活性剂:二氯化-N,N′-二(3-脱氢松香酰氧-2-羟丙基)四甲基乙二胺。在合成工艺条件的基础上,采用IR光谱、MS谱和元素分析测试技术对产物进行了结构确认。结果表明,该产物可降低水的表面张力达34.9 mN/m,临界胶束浓度为1.0×10-4mol/L。表明具有良好疏水性能的2个大"尾巴"使合成的Gemini表面活性剂更易形成胶束,大大提高了表面活性。     

Syntheses and structural characterizations of Fe_4S_4 cubane-like cluster compounds containing cycloalkylthiolate ligands

In a reaction system consisting of FeCl2,tetrathiometallate and cycloalkylthiolate,two Fe4S4 cubane-like cluster compounds were obtained with the following crystallographic data:(PhCH2NMe32[Fe4S4 (SC5H9)4](Ⅰ),monoclinic space group P21/c,a=1.6327(4),6=1.1229(3),c=2.802 5( 10) nm,β=94.63(2)°,Z=4,and R=0.074; (Et4N)2[Fe4S4(SC6H11)4](Ⅱ),tetragonal space group I42m,a=1.16705(9),b=1.167 06(2),c=2.063 26(5) nm,Z=2,Dabs=1.28 g/cm3,and R=0.078 The participation of cy-cloalkylthiolate ligand does not obviously arouse the change of the Fe4S4 core structure.Meanwhile,the influence of the cation on the structural symmetry of the Fe4S4 cluster dianion is also discussed.     

DIRECT SOMATIC EMBRYOGENESIS AND PLANT REGENERATION FROM PROTOPLAST-DERIVED CELLS OF WHEAT (Triticum aestivum L.)

Protoplasts were isolated from embryogenic calli derived from immature embryos ofwheat (Triticum aestivum L. cv. Jinan 177). The protoplasts were cultured in NMB mediumsupplemented with 1mg/L 2,4- D and 500mg/l casein hydrolysate (CH). The regenerated cellsfrom protoplasts divided to form somatic embryos directly. The somatic embryos grown to1.5- 2 mm in size directly developed into complete plants on solid MB medium without hor-mones.     

4-二甲氨基吡啶催化合成含氟苯甲酸糖酯

以4－二甲氨基吡啶为催化剂由含氟苯甲酸与溴代乙酰糖催化酯化合成了4个新的含氟苯甲酸糖酯。其结构经IR，^1H NMR和MS确认，多数还作了^13C NMR测定。     

DFT法研究分子筛催化trans-2-丁烯的双键异构

利用一个3T簇模型模拟分子筛催化剂的酸性位, 采用密度泛函理论(DFT)的 B3LYP/6-31G(d, p)方法, 研究了分子筛催化1-丁烯双键异构为trans-2-丁烯的反应机理. 对反应各驻点进行了全优化, 经过零点能校正后, 得到了反应的活化能. 研究表明, 反应分三步进行：物理吸附→化学反应→物理脱附. 分子筛的酸性位OH基团首先吸附1-丁烯的双键形成了π配位复合物, 然后按协同反应机理发生双键异构反应, 生成吸附态的trans-2-丁烯, 最后脱附成产物. 计算得到的表观活化能为57.1 kJ•mol^-1, 与实验结果接近.     

DETECTION OF T_g BY MODULATED DIFFERENTIAL SCANNING CALORIMETRY

The glassy transition of the polyethylene terephthalate (PET) sampleswhich have been subjected to solvent induced crystallization (SINC) was investigated bymodulated differential scanning calorimetry (MDSC) and density measurement. The dif-ferential of heat capacity signal, d C_p/dT from MDSC, was used to monitor the SINCprocess. It reveals that the T_g temperature shifts to higher value with the advancement ofSINC. When the toluene-immersing time was longer (168h), the detection of T_g becomemore difficult, because some smaller peaks emerged at the lower temperatures and theseare explained as the movement of small segments in the amorphous region. These observedresults are due to the morphology and structure introduced by the SINC process.