Limit Cycle Oscillations of a Wing Section with a Tip Mass

This paper presents an investigation into the limit cycleoscillation phenomenon for a nonlinear aeroelasticsystem under unsteady aerodynamics. The system consists of a sweptbackwing section carrying a tip mass with one degree of freedom. Thejunction stiffness considered between the wing and the tip mass istrilinear. The method of harmonic balance, which can be very practicalin the study of nonlinear flutter, is used for the theoretical analysisof limit cycle oscillations. Stable, unstable and semi-stable limitcycles are predicted in the system for both cases of hardening andsoftening springs. Results found by numerical simulation provide theamplitudes of limit cycles. The experimental results in wind tunneltests agree well with the predictions obtained both theoretically andnumerically.     

Characterization of Fe3O4/poly(styrene-co-N-isopropylacrylamide) magnetic particles with temperature sensitivity

 The average diameter, diameter distribution and surface morphology of Fe₃O₄/poly(styrene-co-N-isopropylacrylamide)[P(St-NIPAM)] particles were characterized by scanning electron microscopy. The copolymer structure was confirmed by IR spectroscopy, differential scanning calorimetry and elemental analysis. The content of Fe₃O₄ entrapped in the particles was determined by atomic absorption spectrometry. A coarse structure was observed on the surface of the Fe₃O₄/P(St-NIPAM) particles. The hydrodynamic diameter of the Fe₃O₄/P(St-NIPAM) particles was found to exhibit about a 15% decrease in diameter on changing the temperature from 25 to 40 °C. The results also showed that Fe₃O₄/P(St-NIPAM) an advantage of exploited magnetic separation. Received: 6 August 1999 Accepted in revised form: 16 November 1999     

Efficient Algorithms for Finding the Maximum Number of Disjoint Paths in Grids

In a rectangular grid, given two sets of nodes, (sources) and (sinks), of size each, the disjoint paths (DP) problem is to connect as many nodes in to the nodes in using a set of “disjoint” paths. (Both edge-disjoint and vertex-disjoint cases are considered in this paper.) Note that in this DP problem, a node in can be connected to any node in . Although in general the sizes of and do not have to be the same, algorithms presented in this paper can also find the maximum number of disjoint paths pairing nodes in and . We use the network flow approach to solve this DP problem. By exploiting all the properties of the network, such as planarity and regularity of a grid, integral flow, and unit capacity source/sink/flow, we can optimally compress the size of the working grid (to be defined) from O(N²) to O(N^1.5) and solve the problem in O(N^2.5) time for both the edge-disjoint and vertex-disjoint cases, an improvement over the straightforward approach which takes O(N³) time.     

The aerosol penetration through an electret fibrous filter

The aim of this paper is to present a theoretical study of the aerosol penetration through an electret fibrous filter, using a numerical approach. The aerosol sizes considered in this study were in the submicron range, and in the numerical model, the conventional mechanical mechanisms (impaction, interception, diffusion and gravitationally settling) were taken into consideration along with the electrostatic mechanisms, including the Coulombic and dielectrophoretic effects. The aerosol penetration through an electret fibrous filter is heavily dependent on the aerosol penetration of a single fibre. The aerosol penetration through a single electret fibre under various filtration conditions was calculated. The effects of aerosol diameter, aerosol and fibre charge state, face velocity, packing density and aerosol dielectric constant on the aerosol penetration were investigated.     

Applying local model approach for tidal prediction in a deterministic model

In recent years, a practice of tidal prediction based on a deterministic model or by a time series forecasting model has been established. A deterministic model can predict tidal movement and capture the dynamics of the flow pattern over the entire domain. However, due to the simplification of model settings and near shore effects, the accuracy of the numerical model can diminish. Time series forecasting is capable of capturing the underlying mechanism that may not be revealed in the deterministic model simulation. However, such data‐driven forecast fails to maintain accuracy with the progress of forecast horizon. In this paper, a scheme that combines the advantages of these two methods is introduced. The model errors are forecasted to different time horizons using a data‐driven approach, and are then superimposed on the simulation results in order to correct the model output. Based on the proposed method, it is found that the accuracy is significantly improved with more than 50% of the errors removed on the average. Copyright © 2008 John Wiley & Sons, Ltd.     

Dielectric and Pyroelectric Properties of Compositionally Graded Pb(Zr1-xTix)O3 Thin Films Prepared by Sol-gel Process

"Compositionally graded ferroelectric lead zirconate titanate Pb(Zr1-xTix)O3 (PZT) thin films were grown on Pt/Ti/SiO2/Si substrates by using a sol-gel process. The final structure consists of six layers, up-graded graded films starting from PbZrO3 on the Pt electrode to the top PZT(50) layer, it consists of no Ti, 10%Ti, 20%Ti, 30%Ti, 40%Ti, and 50%Ti respectively. Whereas films with opposite gradient are called down-graded graded films. Structure and dielectric properties of the graded films was investigated by X-ray diffraction, Auger electron spectroscopy and by impedance analysis. The up-graded and down-graded PZT films annealed at 600 o, exhibited the remanent polarization values of 18.0 and 24.2 1C/cm2, respectively. The typical small signal dielectric constants and loss tanffi at a frequency of 100 Hz were 523 and 0.018, 544, and 0.020, respectively, for up-graded and down-graded PZT thin films. The temperature dependence of pyroelectric coeoients of the graded PZT films was measured by a dynamic technique. From 20 o to 82 o, the pyroelectric coeoients of the up-graded and down-graded PZT films up to 374 and 407 1C/m2K, respectively."     

Initiated Chemical Vapor Deposition of Poly(furfuryl methacrylate)

Furan ring‐functionalized solid surfaces are achieved by the initiated chemical vapor deposition (iCVD) method, a solvent‐free process to form films under mild conditions. The polymerization of furfuryl methacrylate monomer is initiated by a resistively heated filament wire. The functionality of the furan group in the iCVD film enabled Diels–Alder chemistry with 4‐phenyl‐1,2,3‐triazolin‐3,5‐dione (N‐PTD).

     

CONVERGENCE OF NEWTON＇S METHOD FOR A MINIMIZATION PROBLEM IN IMPULSE NOISE REMOVAL

Recently, two-phase schemes for removing salt-and-pepper and random-valued impulse noise are proposed in [6, 7]. The first phase uses decision-based median filters to locate those pixels which are likely to be corrupted by noise (noise candidates). In the second phase, these noise candidates are restored using a detail-preserving regularization method which allows edges and noise-free pixels to be preserved. As shown in [18], this phase is equivalent to solving a one-dimensional nonlinear equation for each noise candidate.One can solve these equations by using Newton‘s method. However, because of the edgepreserving term, the domain of convergence of Newton‘s method will be very narrow. In this paper, we determine the initial guesses for these equations such that Newton‘s method will always converge.     

Effect of Turbulent Flow on Coil‐Globule Transition of λ‐DNA

Summary: The addition of spermidine (SPD) into turbulent flow as a condensing agent showed the abrupt change of turbulent drag reducing (DR) efficiency of λ‐DNA in turbulent flow for the first time. The resultant asymptote DR efficiency explains the origin of those changes, which can be conclusively verified via the electrophoresis experiment. Despite the different fluid conditions, with and without condensing agent, all λ‐DNA molecules possessed the same half‐cut dimension, implying that the discrete change of DNA conformation can dramatically alter the flow characteristics.

Coil‐globule transition of DNA by spermidine.     

耐高温邻苯二甲腈树脂研究进展

邻苯二甲腈树脂是以邻苯二甲腈结构封端的高性能耐高温热固性树脂,具有优异的热氧稳定性、阻燃性、力学强度、低吸水率、低热膨胀系数和介电常数,可用于制备先进复合基体材料、涂料、粘接剂等,在航空技术、电子、机械、军事等领域得到广泛应用.本文综述了邻苯二甲腈树脂结构、邻苯二甲腈单体类型、邻苯二甲腈的固化剂、自催化邻苯二甲腈、生物...