Resonance enhanced three-photon absorption of molecular iodine

D ← X resonance enhanced three-photon excitation spectrum of iodine was observed by a cw intracavity absorption technique. Vibrational quantum numbers of D ← X transitions are given for every major spectral feature. The corresponding one-photon enhancement from the B state is evident from the one-photon vibrational assignment. The spectroscopic constants for the D state are v₀₀ = 40 998 cm^?1 ω′₀ = 113 cm^?1 and ω′₀χ′₀ = 0.045 cm^?.     

A hydrated amorphous iron oxide nanoparticle as active water oxidation catalyst

Developing efficient water oxidation catalysts (WOCs) with earth-abundant elements still remains a challenging task for artificial photosynthesis. Iron-based WOC is a promising candidate because it is economically cheap, little toxic and environmentally friendly. In this study, we found that the catalytic water oxidation activity on amorphous iron-based oxide/hydroxide (FeO_x) can be decreased by an order of magnitude after the dehydration process at room temperature. Thermogravimetric analysis, XRD and Raman results indicated that the dehydration process of FeO_x at room temperature causes the almost completely loss of water molecule with no bulk structural changes. Based on this finding, we prepared hydrated ultrasmall (ca. 2.2 nm) FeO_x nanoparticles of amorphous feature, which turns out to be extremely active as WOC with turnover frequency (TOF) up to 9.3 s^?1 in the photocatalytic Ru(bpy)₃²⁺-Na₂S₂O₈ system. Our findings suggest that future design of active iron-based oxides as WOCs requires the consideration of their hydration status.     

流动注射在线共沉淀预富集火焰原子吸收法测定痕量铜

研究了以Ｎｉ＾２＋－ＤＤＴＣ为共沉淀载体，流动注射在线共沉淀预富集－火焰原子吸收光谱法测定痕量铜的体系，在０．３ｍｏｌ．Ｌ＾－１的硝酸介质中，铜离子在编织反应器中与Ｎｉ＾２＋－ＤＤＴＣ（产生共沉淀，并被收集在编织器内壁上，用甲基异丁基酮（ＭＩＢＫ）在线洗脱沉积物并引入火争原子化器中测定。当富集时间为４０ｓ时，４０μｇ．Ｌ＾－１的铜１０次测定的相对标准偏差为３．０％，灵敏度提高６０倍，检出限（３σ）     

Electronic structure of the Fe3S4 cluster and its quasi-aromaticity

The localized molecular orbitals and their energy levels for the clusters [Fe₃S₄(SH)₃]^2–, [(HS)₃Fe₃S₄·Ni(PH₃)]^2–, [Mo₃S₄(OH₂)₉]⁴⁺, and [Mo₃S₄·Ni]⁴⁺ have been calculated by mean of the Edmiston-Ruedenberg energy localization technique under the CNDO/2 approximation in order to reveal the resemblance between [Fe₃S₄]⁺ and [Mo₃S₄]⁴⁺ in the geometrical configurations and the addition reactivities with heterometal atoms. It is shown that in these two cluster species with core {M ₃(₃-S)(-S)₃} of similar structure (M = Mo, Fe) there exist three synergically connected three-centered two-electron (M-S-M) -bonds around the puckered six-membered {M₃S₃} rings on account of delocalization of a lone electron pair on each bridging S atom; these (M-S-M) -bonds are thus capable of forming cubane-like heterometal clusters with intruder metal atoms through the ( M) bonding. It is therefore seen that unlike the [Mo₃S₄]⁴⁺ with appreciable bonding between the Mo atoms, the extra d-electrons on the metal atoms in the [Fe₃S₄]⁺ cluster are localized on the Fe atoms, exhibiting an electronic structure significantly different from that of the [Mo₃S₄]⁴⁺ cluster.     

Microstructure and Viscosity of Aggregating Colloids under Strong Shearing Force

Disaggregation under strong shearing force is simulated for an aggregating colloid based on a sticky particle model which can describe the disaggregating and aggregating kinetics, the deformation, and the rupture of clusters with a minimum number of parameters. For a 2-dimensional system, the viscosity and coordination number of the model colloid are calculated at each time step, and the changes of microstructure with shear flow are observed directly by displaying the configuration of particles onto a monitor. The viscosity depends on both area fraction and shear rate, but coordination number depends only on shear rate. Furthermore, the viscosity and coordination number at steady state are independent of the initial state of particles, which indicates that the disaggregation and aggregation are mutually reversible. Copyright 1999 Academic Press.     

Preparation and surface properties of latexes with fluorine enriched in the shell by silicon monomer crosslinking

A series of core-shell acrylic copolymer latexes containing fluorine enriched in the shell have been prepared by emulsion polymerization of a variety of hydrocarbon monomers with (perfluoroalkyl)methyl methacrylate and vinyltriethoxysilicone. In the presence of a reactive anionic and a long chain anionic-nonionic emulsifier, the core-shell latexes were prepared and characterized by transmission electron microscopy (TEM) and tapping-mode atomic force microscopy (AFM). From AFM and contact angle measurements, it was observed that the resulting fluorine and silicon-containing acrylic copolymers with surface energy as low as 15.5 mN/m formed a dense and gradient film containing a surface layer with high a fluorine content, and that the fluorinated particles can be fixed on the surface due to the crosslinking reaction of multi-functional silicon monomer even though the fluorinated carbon number was not enough to crystallize.     

Formation of α-Mn2O3 nanorods via a hydrothermal-assisted cleavage-decomposition mechanism

A hydrothermal cleavage-decomposition mechanism was used to synthesize single-crystal α-Mn₂O₃ nanorods at 160 °C for 16 h using KMnO₄ as manganese source and CTAB as reducing regent. The as-synthesized products were characterized by powder X-ray diffraction, transmission electron microscopy, high-resolution transmission electron microscopy and infrared spectrum. The results indicate that the reaction temperature is a crucial factor for the formation of α-Mn₂O₃ nanorods. These nanorods exhibit single-crystal nature, and have an average diameter of 36 nm and lengths of up to 1 μm. Based on our experimental results, a hydrothermal cleavage-decomposition mechanism has been proposed on the formation of α-Mn₂O₃ nanorods.     

Carboxylic Acids from <Emphasis Type="Italic">Phyllanthus urinaria</Emphasis>

Five compounds, terephthalic acid mono-[2-(4-carboxy-phenoxycarbonyl)-vinyl] ester (1), (E)-3-(5′-hydroperoxy-2,2′-dihydroxy[1,1′-biphenyl]-4-yl)-2-propenoic acid (2), 3,4,5-trihydroxybenzoic acid (3), succinic acid (or butanedioic acid) (4), and 2,3,4,5,6-pentahydroxybenzoic acid (5), were isolated from Phyllanthus urinaria. The structures of these compounds were elucidated by means of spectral techniques including IR, MS, and 1D/2D NMR. 1 and 2 are new compounds.__________Published in Khimiya Prirodnykh Soedinenii, No. 1, pp. 14–17, January–February, 2005.     

Preparation and Characterization of Mixed‐Valent Nickel Oxide/Nickel Hexacyanoferrate Hybrid Films and Their Electrocatalytic Properties

Polynuclear mixed‐valent nickel oxide and nickel hexacyanoferrate hybrid film was prepared on glassy carbon electrode by multiple scan cyclic voltammetry. The film growth was monitored using electrochemical quartz crystal microbalance (EQCM). The cyclic voltammogram of the nickel hexacyanoferrate film is characterized by single redox couple whereas nickel oxide/nickel hexacyanoferrate hybrid film exhibits two redox couples. Cyclic voltammetric features suggest that the charge transfer process in both films resembles that of surface‐confined redox species. In stronger basic solution (pH ≥9), nickel hexacyanoferrate film was gradually converted into nickel oxide film during potentiodynamic cycling. The peak potential of nickel oxide redox couple moved into more negative side with increasing pH of contacting solution whereas the peak potential of nickel hexacyanoferrate redox couple remains the same. Electrocatalytic behavior of hybrid film coated electrodes toward ascorbic acid, hydrazine and hydroxylamine was investigated using cyclic voltammetry technique. Analytical application of nickel oxide/nickel hexacyanoferrate hybrid film electrode was tested in amperometry and flow injection analysis.     

血卟啉及其金属衍生物的化学电离质谱

本研究采用直接曝热技术，分别以氢气和甲烷为反应气，测定了１０个血卟啉衍生物和１３个金属血卟啉衍生物的正、负离子解吸化学电离质谱，探讨了各种化学电离质谱法在结构测定中的应用。