Synthesis and Photophysical and Electrochemical Study of Tyrosine Covalently Linked to High‐Valent Copper(III) and Manganese(IV) Complexes

As bio‐inspired chemical model of the oxygen‐evolving complex (OEC) in photosystem II, a new tyrosine‐modified corrole ligand 3 and its high‐valent copper and manganese complexes 3a and 3b were synthesized and characterized. The copper complexes 1a and 2a of corrole 1 and 2 were also prepared for comparison. The emission property indicates that the emission of ligands 2 and 3 is located at 670 nm, but no emission is observed for their metal complexes due to its suppression by the metal center. The electrochemical study shows that 3a might dimerize at the first two reversible oxidations, a behavior which was not observed in the case of 1a and 2a . The corrolato manganese(IV) complex 3b shows one reversible reduction and one quasireversible oxidation at ?0.17 and 0.77 V vs. Ag/Ag⁺, respectively.     

Selective pressurized liquid extraction of polychlorinated biphenyls from fat-containing food and feed samples influence of cell dimensions, solvent type, temperature and flush volume

Sulphuric acid impregnated silica was used for the lipid free extraction of polychlorinated biphenyls from fat containing food and feed matrices using pressurized liquid extraction on a Dionex ASE300, with 34 mL cells. Data were compared to a previous publication where extractions had been performed on a Dionex ASE200, with 33 mL cells. Four different fat/fat retainer ratios (FFRs) were tested (0.100, 0.075, 0.050 and 0.025) at 50 and 100 degrees C using n-pentane, n-hexane or n-heptane as extraction solvent. The best results were obtained with a FFR of 0.025 when applying a temperature of 100 degrees C. Both n-pentane and n-heptane were capable of replacing n-hexane as extraction solvent. A flush volume of 60% was sufficient as suggested in US Environmental Protection Agency Method 3545. The applicability of the method was demonstrated for naturally contaminated fish meal as well as various spiked and certified materials.     

Electrophoretic properties of complexes between DNA and the cationic surfactant cetyltrimethylammonium bromide

We use agarose gel electrophoresis to characterize how the monovalent catioinic surfactant cetyltrimethylammonium bromide (CTAB) compacts double-stranded DNA, which is detected as a reduction in electrophoretic DNA velocity. The velocity reaches a plateau at a ratio R = 1.8 of CTAB to DNA-phosphate charges, i.e., above the neutralization point, and the complexes retain a net negative charge at least up to R = 200. Condensation experiments on a mixture of two DNA sizes show that the complexes formed contain only one condensed DNA molecule each. These CTAB-DNA globules were further characterized by time-resolved measurements of their velocity inside the gel, which showed that CTAB does not dissociate during the migration but possibly upon entry into the gel. Using the Ogston-model for electrophoresis of spherical particles, the measured in-gel velocity of the globule is quantitatively consistent with CTAB having two opposite effects, reduction of both the electrophoretic charge and DNA coil size. In the case of CTAB the two effects nearly cancel, which can explain why opposite velocity shifts (globule faster than uncomplexed DNA) have been observed with some catioinic condensation agents. Dissociation of the complexes by addition of anionic surfactants was also studied. The DNA release from the globule was complete at a mixing ratio between anionic and cationic surfactants equal to 1, in agreement with equilibrium studies. Circular DNA retained its supercoiling, and this demonstrates a lack of DNA nicking in the compaction-release cycle which is important in DNA transfection and purification applications.     

The number of kekulé structures for rectangle-shaped benzenoids,part VIII: Some perforated rectangles

Summary Classes of coronoids (or degenerate coronoids), r and q are obtained by providing the rectangle-shaped benzenoids R^j (m, 3) with a naphthalenic or pyrenic hole, respectively. The numbers of Kekulé structures (K) are studied. It was found for theK numbers of the classes in question:r=4/5R andq=1/5R. The classes r and q are similar to r and q, respectively, but the naphthalenic or pyrenic hole is oriented in a different way. For these classes it was found:r=3/5R,q=2/5R.

---

Die Anzahl von Kekulé-Strukturen für hochkondensierte Benzenoide mit rechteckigem Umriß, 8. Mitt.: Einige perforierte benzenoide Rechteck-Strukturen

Zusammenfassung Es werden Klassen r und q von Coronoiden (oder degenerierten Coronoiden) erhalten, wobei Benzenoide mit rechteckigem Umriß, R^j(m, 3), mit einem Naphthalin- oder Pyren-Loch versehen werden. Die Anzahl von Kekulé-Strukturen (K) wird untersucht; dabei wurde für die untersuchten Klassenr=4/5R undq=1/5R gefunden. Die Klassen r und q verhalten sich ähnlich, das Naphthalin- oder Pyren-Loch ist jedoch anders orientiert; dafür wurder=3/5R undq=2/5R gefunden.

     

Dynamics and energetics of the self-assembly of a hydrophobically modified polyelectrolyte: Naphthalene-labeled poly(acrylic acid)

Steady-state and time-resolved fluorescence studies were performed on aqueous solutions of poly(acrylic acid) hydrophobically modified with two very different levels of naphthalene (Np). It is demonstrated that unique information on association phenomena involving hydrophobe-modifed polymers can be obtained from an extended fluorescence study by using data for a less-modified polymer as a reference. For the more highly modified polymer, the presence of excited-state (as well as ground-state) dimers in addition to monomer emission due to locally excited naphthalene gives evidence for hydrophobic association between naphthalene groups. This association becomes, as expected, much less important at higher pH due to the electrostatic repulsion between different chain segments. However, it is noted that even at high pH there is a significant self-association. The coexistence of static and dynamic quenching phenomena of the Np monomer label was also revealed in the time-resolved fluorescence data. The data are compatible with the existence of two types of monomers and one excimer and suggest that the essential contribution to the monomer emission comes from isolated chromophores, whereas excimer formation arises from both a dynamic route (excited Np chromophores able to produce a dynamic excimer) and a static route (excitation of ground-state Np dimers). At room temperature, the dissociative reaction, excimer-to-monomer, can be neglected, and thus the rate constant for excimer formation and decay could be obtained with and without considering the influence of preformed dimers. Temperature has shown to induce different behavior in the polymer photophysics. In the case of the less-labeled polymer, the decays were found to be single-exponential with the fluorescence lifetime decreasing with increasing temperature. From the temperature dependence of the steady-state fluorescence data, the activation energy for excimer formation and the binding energy of the excimer were evaluated at different pH values, through the Stevens-Ban-type plots of the excimer-to-monomer intensity ratio. With the time-resolved data, measured in the temperature range of 5-60 degrees C, it was possible to extract the intrinsic activation energies for excimer formation. The thermodynamic driving force for the intrapolymeric association was found to be dependent on a balance between hydrophobic and electrostatic interactions, which are dependent on the pH, temperature, and hydrophobic content of the polymer.     

Encapsulated guest molecules in the dimer of octahydroxypyridine[4]arene

Recently a new type of calix[4]arenes has been synthesized via condensation of 2,6-dihydroxypyridine and a number of aldehydes. This type of pyridine[4]arenes forms capsules consisting of two single pyridine[4]arenes. These capsules can incorporate different guest molecules, like carboxylic acids and amides in this case. We proved that the guest acids really are incorporated inside the cavity of the capsules by electrospray mass spectrometry, NMR spectroscopy, and theoretical calculations.     

Microwave-assisted extraction of zearalenone from wheat and corn

A microwave-assisted extraction (MAE) method has been developed for determination of zearalenone in wheat and corn by LC-MS with an atmospheric pressure chemical ionization interface (APCI). Matrix effects were minimized by use of matrix-matched standard curves for quantification of the analyte. The limit of quantification (LOQ) of the method was 30 ng g(-1) in wheat and 20 ng g(-1) in corn. The rapid LC-MS method enabled analysis of the extracts without clean-up, thereby reducing analyte losses, the time required for the analytical procedure, and costs. A factorial design approach was used to examine the effect on extraction efficiency of the main extraction conditions - time, temperature, and solvent. On the basis of results from statistical assessment extraction was performed with 1:1 (v/v) methanol-acetonitrile at 80 degrees C for 5 min. When these extraction conditions were applied to a wheat sample from a recently conducted international proficiency test, 92% (103 ng g(-1)) of the assigned zearalenone concentration (112 ng g(-1)) in the test material was obtained. This result was within the uncertainty (u) range of the assigned value of the test material (u=+/-15.8 ng g(-1), alpha=0.05) thereby demonstrating the accuracy of the method was sufficient. The precision of the whole method was also confirmed to be adequate, because the observed relative standard deviation (RSD) of 12% (n=10) also fulfils the quality criteria recommended by European guidelines for in-house method validation.     

The roles of template complexation and ligand binding conditions on recognition in bupivacaine molecularly imprinted polymers

A model for the molecular basis for ligand recognition in bupivacaine imprinted methacrylic acid-ethylene glycol dimethacrylate co-polymers has been developed based upon a series of (1)H-NMR studies in conjunction with HPLC and radioligand binding analyses. (1)H-NMR studies indicated that functional monomer-template complexes survive the polymerisation process, at least up until the stage of gelation. Polymers were synthesised and characterised by surface area analysis (BET), FT-IR and SEM. A combination of zonal and frontal chromatographic studies in aqueous and non-polar media indicate that selectivity arises from a combination of hydrophobic and electrostatic interactions. However, in the concentration regime employed for LC-based studies, ligand recognition in aqueous media was shown to be predominantly non-specific and hydrophobic in character. Radioligand binding studies, in lower ligand binding concentration regimes, permitted closer examination of the higher affinity binding sites. It was shown that the presence of a polar modifier in a non-polar solvent, or an organic modifier in water, produced enhanced selectivity. Variable temperature studies showed that the temperature of binding influences selectivity as well as the apparent number of sites available and that this effect is different in organic and aqueous environments. This indicates that the system studied is more complex in character than is generally appreciated. A comparison of the techniques employed here indicates that although chromatographic studies provide a valuable first-round screen for polymer-ligand selectivities, the level of detail obtainable using radioligand binding studies (lower concentrations and true equilibrium binding) makes them superior for detailed evaluations of molecularly imprinted polymers.     

Structure and properties of the dendron-encapsulated polyoxometalate (C(52)H(60)NO(12))(12)[(Mn(H(2)O))(3)(SbW(9)O(33))(2)], a first generation dendrizyme

Combining analytical and theoretical methods, we present a detailed study of a heteropolytungstate cluster encapsulated in a shell of dendritically branching surfactants, namely (C(52)H(60)NO(12))(12)[(Mn(H(2)O))(3)(SbW(9)O(33))(2)], 3. This novel surfactant-encapsulated cluster (SEC) self-assembles spontaneously from polyoxometalate-containing solutions treated with a stoichiometric amount of dendrons. Compound 3 exhibits a discrete supramolecular architecture in which a single polyoxometalate anion resides in a compact shell of dendrons. Our approach attempts to combine the catalytic activity of polyoxometalates with the steric properties of tailored dendritic surfactants into size-selective catalytic systems. The structural characterization of the SEC is based on analytical ultracentrifugation (AUC) and small-angle neutron scattering (SANS). The packing arrangement of dendrons at the cluster surface is gleaned from molecular dynamics (MD) simulations, which suggests a highly porous shell structure due to the dynamic formation of internal clefts and cavities. From analysis of the MD trajectory of 3, a theoretical neutron-scattering function is derived that is in good agreement with experimental SANS data. Force field parameters used in MD simulations are partially derived from a quantum mechanical geometry optimization of [(Zn(H(2)O))(3)(SbW(9)O(33))(2)](12)(-), 2b, at the density functional theory (DFT) level. DFT calculations are corroborated by X-ray structure analysis of Na(6)K(6)[(Zn(H(2)O))(3)(SbW(9)O(33))(2)].23H(2)O, which is isostructural with the catalytically active Mn derivative 2a. The combined use of theoretical and analytical methods aims at rapidly prototyping smart catalysts ("dendrizymes"), which are structurally related to naturally occurring metalloproteins.     

Determination of average degree of polymerisation and distribution of oligosaccharides in a partially acid-hydrolysed homopolysaccharide: a comparison of four experimental methods applied to mannuronan

The average degree of polymerisation (DP) and distribution of oligosaccharides in partially acid hydrolysed mannuronans were quantitatively evaluated by 1H NMR, electrospray ionisation mass spectrometry (ESI-MS), micellar electrokinetic capillary chromatography with UV detection (MEKC-UV), and high-pressure anion-exchange chromatography with pulsed amperometric detection (HPAEC-PAD). Our investigation shows that 1H NMR, MEKC-UV and, in particular, HPAEC-PAD can be used as quantitative tools to aid the investigation of polysaccharide structure, function and synthesis. For the latter two techniques, especially, this represents a significant new development as it enables calculation of the quantity of individual oligomers of nominal DP by direct analysis of a defined oligomer mixture. Appropriate statistical averages of number and weight distributions were also calculated and found to fit very well to predicted Kuhn distributions that assume random depolymerisation.