制导光缆中光纤寿命预期

介绍了光纤寿命预期的疲劳实验方法和筛选实验方法。采用这两种方法，利用电子万能材料试验机和光纤筛选复绕机对室温下光纤进行了疲劳性能实验。实验得出，在张力小于850g的情况下，制导光纤的寿命可以达到10年以上；光纤的韦伯参数md和疲劳参数nd的大小影响光纤寿命。实验表明，当光纤的使用状态受力较大时，或使用贮存状态相差较大时，宜选用动态方法进行寿命预期；当贮存和使用状态受力变化不大时，宜选用筛选复绕方法预期光纤寿命。制导光纤寿命模型宜选用动态疲劳模型，通信光纤可选用筛选实验模型。实验还表明，提高光纤的抗疲劳因子nd和减小光缆中光纤的应变，可以更好地保持光缆中光纤的使用寿命和可靠性。     

Characterization of inner layer thickness change of a composite circular tube using nonlinear circumferential guided wave:A feasibility study

The feasibility of using the nonlinear effect of primary circumferential guided wave (CGW) propagation for characterizing the change of inner layer thickness of a composite circular tube (CCT) has been investigated. An appropriate mode pair of the fundamental and double-frequency CGWs (DFCGWs) has been selected to enable the second harmonics of primary wave mode in the given CCT to accumulate along the circumferential direction. When changes in the inner layer thickness (described as the equivalent inner layer thickness) take place, the corresponding nonlinear CGW measurements are conducted. It is found that there is a direct correlation between change of equivalent inner layer thickness of the CCT and the relative acoustic nonlinearity parameter (Δβ) measured with CGWs propagating through one full circumference, and that the effect of second-harmonic generation (SHG) is very sensitive to change in the inner layer thickness. The experimental result obtained demonstrates the feasibility for quantitatively assessing the change of equivalent inner layer thickness in CCTs using the effect of SHG by primary CGW propagation.     

How Does van der Waals Confinement Enhance Phonon Transport?

We study the mechanism of van der Waals(vdW)interactions on phonon transport in atomic scale,which would boost developments in heat management and energy conversion.Commonly,the vdW interactions are regarded as a hindrance in phonon transport.Here we propose that the vdW confinement can enhance phonon transport.Through molecular dynamics simulations,it is realized that the vdW confinement is able to make more than two-fold enhancement on thermal conductivity of both polyethylene single chain and graphene nanoribbon.The quantitative analyses of morphology,local vdW potential energy and dynamical properties are carried out to reveal the underlying physical mechanism.It is found that the confined vdW potential barriers reduce the atomic thermal displacement magnitudes,leading to less phonon scattering and facilitating thermal transport.Our study offers a new strategy to modulate the phonon transport.     

氧化钙改性高岭土对垃圾渗滤液中氨氮的去除研究

采用氧化钙对高岭土进行改性,并用XRD、SEM和FT-IR对改性高岭土进行了表征。将改性高岭土应用于垃圾渗滤液的处理,考察了改性高岭土投加量、渗滤液初始pH、时间等因素对氨氮去除效果的影响,并对其吸附机理进行了研究。结果表明,氧化钙改性高岭土的产物主要是胶凝材料水化物(硅铝酸钙和含Al的C-S-H凝胶),形貌为蜂窝状;向氨氮含量为3520mg/L、pH为7.53~7.80的垃圾渗滤液中投加160g/L吸附剂,吸附60min,氨氮的去除率达82.66%,吸附量为18.19mg/g。氧化钙改性高岭土对氨氮的吸附符合Langmuir等温模型,动力学上符合准二级动力学方程,其相关系数分别为0.9678,0.9989。同时,该吸附过程包含了膜扩散和颗粒内扩散。     

4-氯-2-(1H-咪唑并[4,5-f][1,10]菲咯啉)苯酚铜(Ⅱ)配合物的晶体结构及其与DNA的相互作用

利用菲咯啉酮衍生物4-氯-2-(1H-咪唑并[4,5-f][1,10]菲咯啉)苯酚(HL)设计合成了一种新的单核铜配合物[Cu(L)(5-Cl-sal)(DMF)]ClO_4·DMF(5-Cl-Hsal=5-氯-水杨醛),用元素分析和X射线单晶衍射等手段对配合物进行了表征。该配合物晶体属三斜晶系,P1空间群。用紫外吸收光谱、荧光光谱和凝胶电泳等方法研究了配合物与DNA的相互作用。结果表明,配合物以插入方式与CT-DNA结合,结合常数为1.02×10~3 L·mol~(-1)。同时配合物也能较大程度淬灭EB-DNA复合物的荧光,表观键合常数为4.37×10~5L·mol_(-1),略小于经典键合常数107 L·mol~(-1)。淬灭机理为动态淬灭。凝胶电泳实验研究表明配合物在H_2O_2存在下可将pBR322质粒DNA切割为开环缺口型DNA和线型DNA,配合物浓度越大,切割效果越好。机理研究显示,配合物切割DNA的反应是由羟基自由基(·OH)和单线态氧(~1O_2)作为活性物种的氧化切割过程。     

预烧温度对CaO-Li_2O-Sm_2O_3-TiO_2微波介质陶瓷介电性能的影响

用固相反应法制备了CaO-Li2O-Sm2O3-TiO2(CLST)微波介质陶瓷。通过改变预烧温度(1 000~1 200℃)研究其对CLST微波介质陶瓷介电性能的影响。研究过程中,对预烧粉体与烧结陶瓷进行XRD与SEM分析,对陶瓷的介电性能εr、Q、τf进行了测试。结果表明,预烧温度对CLST微波介质陶瓷介电性能有较大影响,在预烧温度1 150℃,烧结温度1 340℃时可获得较好的介电性能:εr=112,Q=845,τf=52×10-6/℃。     

氨基甲酸酯类化合物的合成进展

作为一类重要的精细化学品,氨基甲酸酯类化合物在农药、医药及有机合成等领域有着广泛的应用。本文介绍了氨基甲酸酯类化合物的主要合成方法,重点阐述了光气及其衍生物法、羰基化法、二氧化碳法、脲类化合物醇解法、霍夫曼重排法等一系列合成途径,并对各合成方法进行了分析评价。指出硒催化硝基化合物及胺等含氮化合物与醇在一氧化碳存在下经羰基化反应来合成氨基甲酸酯类化合物的方法具有较好的发展前景。     

聚醚环酰胺固体推进剂用键合剂的合成及使用性能

以丙三醇、环氧乙烷、环氧丙烷、氯化亚砜、异氰脲酸等为原料,合成了聚醚环酰胺键合剂。将其应用到推进剂(GAP/HMX/Al/AP)配方中,对成型后的推进剂进行力学性能测试和断面电子显微镜分析。结果表明,此类键合剂可以改善与推进剂中氧化剂的界面粘结性能,有效地提高成型后的推进剂在不同温度下的最大延伸率,但对抗拉伸强度的提高作用不明显。     

车辆寻北车长镜的设计与实现

 描述了一种车辆寻北车长镜的设计,采用2个光纤陀螺和2个加速度计,解决了惯性测量组件力学编排结构设计与寻北、瞄准线稳定共享陀螺信息的问题,设计系统控制流程和组合算法,在保障车长镜瞄准线稳定精度的同时,增加了车体方位平台非调平状态下任意位置的寻北功能,寻北方法是：车长镜方位固定四位置转动,每个位置点停止、延迟、数据采样、存储,四位置转动完毕后,对存储数据组合、滤波、解算,输出寻北结果。对方案设计、实现途径和解算推导方法作了详细论述,性能测试验证设计实现达到预期效果。     

Fabrication and electromagnetic wave absorption properties of amorphous Ni-P nanotubes

Amorphous Ni-P nanotubes are fabricated through electroless chemical deposition inside an anodic aluminum oxide template. The hysteresis loops of Ni-P nanotube arrays are each found to exhibit an unusual isotropic behaviour, which is believed to be due to the competition results between the shape anisotropy and the magnetostatic interaction among nanotubes. The dynamic dependence of permittivity on the frequency spectrum is fitted to the Lorentzian-type dispersion law. The permeability dispersion behaviours have been fitted based on the Kittel equation. Electromagnetic wave absorption properties of Ni-P nanotubes/paraffin composites with different values of thickness (t) are clearly shown by a three-dimensional graph. Furthermore, the bandwidths of composites with different "t" values can be well presented by a two-dimensional contour graph, which is a novel presentation form. The results show that the composites each have a good microwave absorption performance with t larger than 5.5 mm and with the frequency around 8 gigahertz.