特殊值l-群的l-同态象及l-扩张性

本文研究了特殊值 l-群的一类特殊的 l-同态象及 l-扩张闭性 .在非超 Archimedean的条件下 ,证明了 l-群 G是特殊值的当且仅当对于 G的每个闭 l-理想 K,G/ K与 K均是特殊值的 .     

等离子体电极电光开关大面积辉光放电的产生及其特性

 在电光开关的晶体两侧，用辉光放电产生的高电导率透明等离子体作为施加开关脉冲电压的电极，可大大增加开关的通光口径。利用设计建造的一个80mm×80mm口径的等离子体电极电光开关，研究了用于电光开关中的大面积辉光放电的产生方法及放电特性。描述了等离子体电极普克尔盒的结构、放电室和电极的几何尺寸、放电电路及其参数，实验观测了预电离和工作气压对放电的影响。     

LCAC—SW方法中阻尼函数的研究

研究了在排列通道线性组合散射波方法中阻尼函数的衰减形式，通过计算表明，在三维Ｈ＋Ｈ２交换反应中，阻尼函数应以快于１－ｅｘｐ的形式，如ｆ（Ｒ）＝１－ｅｘｐ，在经典回转点处衰减为０，同时提出闭通道函数应分布在准经典近似不适用的区域。     

A top-face-sway electromagnetic micromotor

In this paper, the structure of a top-face-sway electromagnetic micromotor and its principle, fabrication and performance are introduced. A combination of the electromagnetic actuating and the planetary reducing provides this micromotor an advantage of low rotational speed and high torque. In addition, since a flexible coupling absorbs the sway and only outputs rotation, it gives this micromotor a balanced output. The dimension of the micromotor is 5 mm. Its rotation speed has a range of 20 - 860 rpm, and its driving current is 300 mA. The output torque of the micromotor is measured to be 13.0 uNm.     

离子束注入对聚四氟乙烯表面改性研究

在剂量为1×1014～1×1017 ions/cm2的范围内,用能量为160 keV氮离子对PTFE表面进行注入处理,处理后的样品用可见(514.5nm)和傅立叶红外(1064 nm)喇曼(Raman)光谱以及扫描电镜进行检测.结果表明低剂量注入可导致弱C-C键的断裂,中等剂量时溅射损失效应明显,高剂量注入时微观结构强烈地变化并生成C=C双键.     

A quantum scattering study of collinear state-to-state reaction probabilities for the F+H_2(ν)→-HF(v'''')+H system

A new quantum scattering approach (linear combination of arrangement channels-scattering wavefunction,LCAC-SW) proposed by Deng and his co-workers is used to calculate collinear state-to-state reaction probabilities for the F + H-2(v)→HF(v')+H system.Several interesting problems such as threshold energy,compound states and enhance by translational energy of the reactants and the vibration excitation of products are discussed and they are compared with other theoretical investigations reported in the literature.It is shown that the LCAC-SW approach is the successful one of quantum scattering methods.     

Behaviour of Self-Standing CVD Diamond Film with Different Dominant Crystalline Surfaces in Thermal-Iron Plate Polishing

Self-standing CVD diamond films with different dominant crystalline surfaces are polished by the thermal-iron plate polishing method. The influence of the dominant crystalline surfaces on polishing etfficiency is investigated by measuring the removal rate and final roughness. The smallest rms roughness of 0.14 μm is measured with smallest removal rate in the films with the initial （220） dominant crystalline surface. Activation energy for the polishing is analysed by the Arrhenius relation. It is found that the values are 170kJ/mol, 222kJ/mol and 214kJ/mol for the film with three different dominant crystalline surfaces. Based on these values, the polishing cause is regarded as the graphitization-controlling process. In the experiment, we find that transformation of the dominant crystalline surfaces from （111） to （220） always appears in the polishing process when we polish the （111） dominant surface.     

关于开孔薄板大挠度问题的一般数学理论(续)

本文讨论了作用在开孔薄板的各孔边上的外力自身不平衡吋的大挠度问题的应力函数的多值性,并给出了这种问题的一般数学模型,因此本文可以看成是[1]的继续和深入。