Molecular mobility of lyophilized poly(vinylpyrrolidone) and methylcellulose as determined by the laboratory and rotating frame spin-lattice relaxation times of 1H and 13C

Laboratory- and rotating- frame spin-lattice relaxation times (T(1) and T(1rho)) of (1)H and (13)C in lyophilized poly(vinylpyrrolidone) (PVP) and methylcellulose (MC) are determined to examine feasibility of using T(1) and T(1rho) as a measure of molecular motions on large time scales related to the storage stability of lyophilized formulations. The T(1rho) of proton and carbon was found to reflect the mobility of PVP and MC backbones, indicating that it is useful as a measure of large-time-scale molecular motions. In contrast to the T(1rho), the T(1) of proton measured in the same temperature range reflected the mobility of PVP and MC side chains. The T(1) of proton may be useful as a measure of local molecular motions on a smaller-time-scale, although the measurement is interfered by moisture under some conditions. The temperature dependence of T(1) and T(1rho) indicated that methylene in the MC molecule had much higher mobility than that in the dextran molecule, also indicated that methylene in the PVP side chain had a higher mobility than that in the MC side chain.     

Use of high molecular weight amines for end-point indication in the complexometric titration of Iron(III) with thiocyanate as indicator

Summary A new type of end-point indication for the complexometric titration of iron(III) is proposed. A 10% carbon tetrachloride solution of Amberlite LA-1 is applied for the extraction of the thiocyanate complexes. Very sharp color change of the organic phase from red to pale yellow gives the accurate end point for titrations with 0.01M EDTA as in the Variamine Blue B method.

---

Zusammenfassung Eine neue Methode zur Endpunktanzeige bei der komplexometrischen Titration, von Eisen(III) wird vorgeschlagen. Eine 10%ige Tetrachlorkohlen-stofflösung von Amberlite LA-1 wird zum Ausschütteln der Thiocyanatkomplexe angewendet. Ein sehr scharfer Farbumschlag der organischen Phase von rot nach blaßgelb zeigt den Endpunkt für Titrationen mit 0,01-m ÄDTA so genau wie bei der Variaminblau-B-Methode an.

     

Dipyrrolyldiketone difluoroboron complexes: novel anion sensors with C-H...X- interactions

1,3-Dipyrrolyl-1,3-propanediones, synthesized from pyrroles and malonyl chloride, form BF2 complexes, which represent a new class of naked-eye sensors for halide and oxoanions. The association mode for the interactions of both the pyrrolyl NH and bridging CH protons with anions was confirmed by 1H NMR chemical shifts in CD2Cl2 and supported by theoretical studies. The binding constants (Ka) were estimated as 8.1x10(4), 2.0x10(3), 3.3x10(2), 1.3x10(4), and 80 M(-1) for F-, Cl-, Br-, H2PO4(-), and HSO4(-) by UV/Vis absorption spectral changes in CH2Cl2. Augmentation of Ka compared with dipyrrolylquinoxaline for H2PO4(-) is much larger than those for other anions. Contrary to other anions, F- quenches the emission almost completely, which was detected by the fluorescence spectrum as well as the naked-eye. In the case of the chloride anion complex, the formation of Cl(-)-bridged 1D networks, in which anion is associated with two BF2 complexes, is observed in the solid state.     

The low-lying electronic excited states of NiCO

Highly correlated coupled cluster methods with single and double excitations (CSSD) and CCSD with perturbative triple excitations were used to predict molecular structures and harmonic vibrational frequencies for the electronic ground state X 1Sigma+, and for the 3Delta, 3Sigma+, 3Phi, 1 3Pi, 2 3Pi, 1Sigma+, 1Delta, and 1Pi excited states of NiCO. The X 1Sigma+ ground state's geometry is for the first time compared with the recently determined experimental structure. The adiabatic excitation energies, vertical excitation energies, and dissociation energies of these excited states are predicted. The importance of pi and sigma bonding for the Ni-C bond is discussed based on the structures of excited states.     

Changes of electrochemical responses of the bulk solution species by thermotropic permeability of liquid crystalline membranes coated on electrodes

Liquid crystalline/polymer composite membrane-coated electrodes were prepared by casting a 1,2-dichloroethane solution of N-(4-ethoxybenzylidene)-4′-n-butylaniline (EBBA) and polycarbonate (PC) on an electrode surface. The temperature-dependence of the permeability of the EBBA/PC composite membrane on electrodes to Fe(CN)^3?₆ ion as a solution-phase redox ion was investigated by means of hydrodynamic voltammetry at a rotating disk electrode. The permeability changed with temperature over the range of the crystalline-nematic-phase transition temperature of EBBA. It is demonstrated that the observed temperature-dependence of the permeability reflects the thermotropic properties of EBBA in the EBBA/PC composite membrane. Furthermore, the dependence of the limiting current of the steady-state current-potential curves for the reduction of Fe(CN)^—₆ at the EBBA/PC composite membrane-coated electrode upon the membrane thickness, the blend ratio of EBBA and PC and the concentration of Fe(CN)^3?₆ in a bulk solution was examined in order to understand the transport process of Fe(CN)^?3₆ through the EBBA/PC composite membrane from the membrane/solution interface to the electrode/membrane interface. The transport process of Fe(CN)^3?₆ within the membrane was found to obey Fick's Law.     

Self-crosslinkable polymers. I. Copolymerization of glycidyl methacrylate with 2-vinylpyridine and 2-vinyl-5-ethylpyridine

A soluble and self-crosslinkable linear copolymer with pendant epoxy and pyridyl groups was obtained from glycidyl methacrylate (M₁) and 2-vinylpyridine (M₂) or 2-vinyl-5-ethylpyridine (M₂) by the action of azobisisobutyronitrile. The monomer reactivity ratios were determined in tetrahydrofuran at 60°C: r₁ = 0.510, r₂ = 0.620 with 2-vinylpyridine and r₁ = 0.57, r₂ = 0.62 with 2-vinyl-5-ethylpyridine. These were consistent with the calculated values with the reported Q and e values for these monomers. The intrinsic viscosities of the copolymers with 2-vinylpyridine and with 2-vinyl-5-ethylpyridine were found to be 0.17–0.19 and 0.26–0.38, respectively, in tetrahydrofuran at 30°C; they were independent of the copolymer composition. The copolymers were amorphous, had no clear melting points, and became insoluble crosslinked polymers under heating without further addition of any curing agents.     

Determination of very low levels of inorganic and organic mercury in natural waters by cold-vapor atomic absorption spectrometry after preconcentration on a chelating resin

Inorganic and organic mercury at ng l^?1 levels in fresh waters are collected simultaneously on a column of a dithiocarbamate-treated resin and quantitatively eluted with slightly acidic aqueous thiourea solution. Mercury vapor is generated from inorganic mercury by reduction with alkaline SnCl₂ solution, and from inorganic and organic mercury with a CdCl₂SnCl₂ solution, for determination by cold-vapor atomic absorption spectrometry. The range of determination is 0.2–5,000 ppt (ng l^?1) for 20-l water samples.     

A twin optically-pumped far-infrared CH3OH laser for plasma diagnostics

A twin optically-pumped far-infrared CH₃OH laser has been constructed for use in plasma diagnostics. The antisymmetric doublet due to the Raman-type resonant two-photon transition is reproducibly observed at 118.8 m. With the 118.8-m line, it is obtained from the frequency separation of the anti-symmetric doublet that CH₃OH absorption line center is 16±1 MHz higher than the pump 9.7-m P(36) CO₂ laser line center. It is shown that the Raman-type resonant two-photon transition is useful in order to get several-MHz phase modulation for the far-infrared laser interferometer. Some preliminary performances of this twin laser for the modulated interferometer are described.This work was carried out under the collaborating research program at the Institute of Plasma Physics, Nagoya University, Nagoya 464, Japan.     

Block copolymer from α,ω-dihydroxyl polystyrene and polyethylene glycol

α,ω-Dihydroxyl polystyrene was synthesized by the addition of styrene oxide to polystyryl dianion initiated with sodium naphthalene. Diglyme was found to be an unsuitable solvent for the preparation of low molecular weight compounds. Block copolymerization of the α,ω-dihydroxyl polystyrenes (M?_n = 2250, 3140, and 6200) with poly(ethylene glycols) (M?_n = 404, 1960, and 5650) was pursued by introducing urethane linkages with 4,4′-diphenylmethane diisocyanate. The mechanical, thermal, and viscoelastic properties, solution viscosity, molecular weight distribution, and moisture absorption of the block copolymers obtained were examined. Incorporation of styrene blocks was found to disturb the crystallization and fusion of poly(ethylene glycol) blocks. Films cast from benzene solution were soft and elastic and absorbed up to 5.8% moisture.     

Asymmetric synthesis of permethric acid. stereochemistry of chiral copper carbenoid reaction

The most effective optical isomer (1$\text{R}$-$\text{cis}$) of permethric acid ($\text{2}$, R = H), a potent intermediate in the production of synthetic pyrethroid, was enantioselectively prepared.