高剂量率单次快脉冲辐射参量测量

记述了“强光一号”高剂量率脉冲辐射装置在状态调试过程中对其出射波形和辐射剂量进行监测的基本情况，实际监测的结果与设计方监测的结果进行了比对，双方的剂量监测值基本一致，偏差在20％以内；双方的波形形状十分相似，但测量得到的波形半宽度却相差10～20ns，最后对双方束流监测产生的差异进行了定性分析。     

光子晶体的原理与应用

光子晶体是一种在微米、亚微米等光波长量级上折射率呈现周期性变化的介质材料，它使某些频率范围内的光子态密度大大降低．甚至完全形成光子禁带．本文介绍了光子晶体的原理、制备及应用．     

使用《新概念物理教程:力学》的教学探索

简要介绍《新概念物理教程：力学》的知识体系、特色及改革新意．结合南阳师院2000级、2001级两届本科班对新教材的使用情况，制定适合我院学生实际的力学教学大纲，探索一种以知识为载体、以学生为主体、以培养学生科学素质为宗旨的新型教学模式．对教学中遇到的问题提出具体的解决办法，对使用新教材的效果进行调查分析，为力学教材的使用和力学教学改革提供一些参考。     

开关型霍尔传感器的原理与工程实现

介绍了开关型霍尔传感器的工作原理，设计了适用于工程测量的具体线路，并分析了该线路的特点。     

Fe-ZSM-5杂原子分子筛的合成与表征

采用静态水热法分别以正丁胺、四丙基溴化铵为模板剂合成ZSM-5分子筛及Fe-ZSM-5杂原子分子筛；利用XRD与FT-IR对其结构进行表征；考察了Mo改性后分子筛催化剂上甲烷脱氢芳构化的反应性能。结果表明，Fe部分进入了分子筛的骨架，导致分子筛的结晶度及表面酸强度的下降，使Mo／Fe-ZSM-5催化剂的反应性能较Mo／HZSM-5显著下降。     

提高YBCO块材在外磁场中悬浮力

本给出了三种提高YBCO块材在外磁场中悬浮力的方法．第一种方法是增强外磁场，对于此方法，本研究了一块直径为30mm的圆柱状YBCO块材分别在圆柱状NdFeB永磁体和NdFeB永磁导轨上的悬浮力．测量结果表明在77K温度下YBCO块在圆柱状NdFeB永磁体上的最大悬浮力为50N，在NdFeB永磁导轨上的最大悬浮力为103．ON．第二种方法是提高YBCO块材自身的性能，包括临界电流密度、俘获磁通和块材尺寸，对于此方法，本仅研究了块材尺寸对悬浮力的影响．三块直径分别为30mm、35mm、40mm的圆柱状YBC0块材在NdFeB永磁导轨上的悬浮力被测量，77K温度下5mm悬浮间距时的悬浮力分别为103．ON、134．5N、175．ON．第三方法是将YBCO块材变成准永久磁体，此种情况下，直径为40mm的圆柱状YBCO块材在77K温度下5mm悬浮间距时的悬浮力高达218．3N．     

陆生植物黑麦草(Lolium multiflorum)对富营养化水体修复的围隔实验研究——氨氮的净化效应及其动态过程

采用浮床黑麦草（Lolium multi florum）对畜禽养殖富营养水体氨氮的净化效应及动态过程进行了研究．结果表明：浮床黑麦草对富营养水体中的氨氮具有明显的净化效果．当覆盖率30％时，对氨氮的去除率最高可达到95．89％．对其去除水体氨氮的动态过程拟合表明符合三次方程曲线．该研究为冬季陆生植物修复富营养水体提供重要依据．     

同步辐射与GGG：Nd^3＋晶体的相互作用

用北京同步辐射489A-VUV束线作为连续光源测定了GGG:Nd~(3+)晶体的短波吸收光谱。用束线4B9A-WX作为光源激发GGG:Nd~(3+),测定了它的XEOL(X-ray excited optical luminescence)。     

Surface Nitridation of Molybdenum by Laser-promoted Reaction

l.IntroductionowingtotheirpromisingproPertiesandPOtentialapplications,transitionmetalni-trideshavedrawngreatattentionandthepreparationandinvestigationofthesecom-poundshavebeenasubjectbothofscientificandoftechnologicalinterest.Transitionmetalnitridescombineadvantagesofexce1lenthardness,highmeltingPOint,goodchemi-calstabilityandhigheIectricalconductivity[11,henceoverlaySofthesecompoundshavefoundwideappIicationsinvariousfie1ds.Molybdenumnitrides,inparticular,havealsoemergedasverypromisingcandi…     

PINNING EFFECT OF LEAD LANTHANUM TITANATE THIN FILMS DEPOSITED ON DIFFERENT SUBSTRATES

Pinning effect of lead lanthanum titanate (PLT) ferroelectric thin films with excess PbO of 20 mol% has been studied for deposition on diffe rent substrates. Silicon, sapphire and quartz were used as substrates on which P t/Ti or LaNiO₃ thin films were deposited as bottom electrodes. Electron probe analysis results showed that there was still a certain amount of excess Pb in PLT films after annealing at 550 ℃ for 1 h, and the amount of it was dependent on the substrate used. The distribution of excess Pb in the films was investig ated by Auger electron spectroscopy depth profile. It was shown that the substrates and the bottom electrodes had significant effects on the content and distrib ution of excess Pb in PLT films. The excess Pb and its accumulation at the inter face between the film and bottom electrode may act as pinning centers and have a pinning effect on domains, which can be observed by abnormal P-E hysteresis loops and abnormal C-V curves. The excess Pb content in the films and the accumulation of Pb at the interface were high in PLT films deposited on Pt/Ti/S i, and considerable pinning effect was observed. As LaNiO₃ would absorb most part of the excess Pb in PLT films, the content of excess Pb in the films deposited on LaNiO₃/Si was very low and the pinning effect was hardly observed.