Physico-Chemical Characterization of Binary and Ternary Mixtures of Imidazolium Based Cation and Common Anion Ionic Liquids with Lactams

Journal of Solution Chemistry - Excess molar volumes, $$V_{{}}^{{\text{E}}}$$ , excess isentropic compressibilities, $$\kappa_{{\text{S}}}^{{\text{E}}}$$ of binary 1-butyl-2,3-dimethylimidazolium...     

Aggregation and microenvironmental properties of gemini and conventional mixed surfactants systems: A fluorometric study

Aggregation behavior of cationic gemini (hexanediyl-1,5-bis(dimethylcettylammonium bromide) (16-5-16)) surfactant with conventional single chain surfactants cetyltrimethylammonium bromide (CTAB) and tetradecyltrimethylammonium bromide (TTAB) were studied with the help of fluorescence measurements. Fluorescence probe is a proficient technique for examining the surfactant-surfactant interaction and aggregation. The micelle aggregation number (N _agg) was measured using steady-state fluorescence quenching method. The micelle aggregation numbers of binary combinations fall between those of constituent surfactants. The micropolarity (I ₁/I ₃), binding constant (K _sv) and dielectric constant (D _exp) of mixed systems were determined from the ratio of peaks intensity in the pyrene fluorescence spectrum. The I ₁/I ₃ values were found to be more than >1, showing more polar environment around pyrene in the mixed micelle as compared to the pure micelles.     

Scaling of Shielded Sliding Discharges for Environmental Applications

Shielded sliding discharges are nanosecond streamer discharges which develop along a dielectric between metal foil electrodes, with one of the foils extended over the entire rear of the dielectric layer. The electrode configuration not only allowed rearranging discharges in parallel due to the decoupling effect of the metal layer, but also to modify the electric field distribution in such a way that components normal to the surface are enhanced, leading to an increased energy density in the discharge plasma. By varying the electrode gap, the applied voltage, and the repetition rate, it is shown that by keeping the average electric field constant, the discharge voltage can be reduced from tens of kV to values on the order of a few kV, but only at the expense of a reduced energy density of the plasma. Varying the repetition rate from 20 to 500 Hz resulted in a slightly reduced energy per pulse, likely caused by residual charges on the dielectric surface. Measurements of the NO conversion to NO₂ and ozone synthesis in dry air showed that the conversion is only dependent on the energy density of the discharge plasma. Although reducing the pulse voltage from the tens of kV range to that of few kV, and possibly even lower, causes a reduction in energy density, this loss can be compensated for by increasing the electrode gap area. This and the possibility to form discharge arrays allows generating large volume discharge reactors for environmental applications, at modest pulsed voltages.     

Aqueous media preparation of 2-amino-4,6-diphenylnicotinonitriles using cellulose sulfuric acid as an efficient catalyst

A convenient approach to the synthesis of 2-amino-4,6-diphenylnicotinonitriles via four-component reaction of aromatic aldehydes, acetophenone derivatives, malononitrile and ammonium acetate is described. The reactions were done in water as solvent using cellulose sulfuric acid as catalyst. This simple protocol offer advantages such as shorter reaction times, simple work-up procedure, excellent yields and catalyst recovery.     

Synthesis of SnO2 nanostructures by ultrasonic-assisted sol–gel method

Fluorine doped SnO₂ nanostructures were grown using ultrasonic assisted sol–gel method. The gel was obtained by dissolving stannous chloride in methanol with ammonium fluoride as dopant followed by irradiation with ultrasonic vibrations. Obtained samples were characterized by structural, morphological and optical studies. All the peaks in the X-ray diffractograms are identified and indexed as tetragonal cassiterite structure. Negative slope of Williamson–Hall plots indicates compressive strain. Particle size of SnO₂ nanostructures is decreases with increases in concentration of fluorine doping. Atomic force microscopy, scanning electron microscopy and transmission electron microscopy studies confirm the formation of ring like porous structures and then hollow tube like growth with increase in the fluorine concentration. Peaks in Raman spectra also indicate strong confinement in SnO₂ particles. Distinct peaks in the PL spectra make the structure suitable for photovoltaic applications.     

Semisynthesis of Functional Glycosylphosphatidylinositol‐Anchored Proteins

Glypiation is a common posttranslational modification of eukaryotic proteins involving the attachment of a glycosylphosphatidylinositol (GPI) glycolipid. GPIs contain a conserved phosphoglycan that is modified in a cell‐ and tissue‐specific manner. GPI complexity suggests roles in biological processes and effects on the attached protein, but the difficulties to get homogeneous material have hindered studies. We disclose a one‐pot intein‐mediated ligation (OPL) to obtain GPI‐anchored proteins. The strategy enables the glypiation of folded and denatured proteins with a natural linkage to the glycolipid. Using the strategy, glypiated eGFP, Thy1, and the Plasmodium berghei protein MSP1₁₉ were prepared. Glypiation did not alter the structure of eGFP and MSP1₁₉ proteins in solution, but it induced a strong pro‐inflammatory response in vitro. The strategy provides access to glypiated proteins to elucidate the activity of this modification and for use as vaccine candidates against parasitic infections.     

High Na+ Mobility in rGO Wrapped High Aspect Ratio 1D SbSe Nano Structure Renders Better Electrochemical Na+ Battery Performance

We chose to understand the cyclic instability and rate instability issues in the promising class of Na⁺ conversion and alloying anodes with Sb₂Se₃ as a typical example. We employ a synthetic strategy that ensures efficient rGO (reduced graphene oxide) wrapping over Sb₂Se₃ material. By utilization of the minimum weight of additive (5 wt.% of rGO), we achieved a commendable performance with a reversible capacity of 550 mAh g⁻¹ at a specific current of 100 mA g⁻¹ and an impressive rate performance with 100 % capacity retention after high current cycling involving a 2 Ag⁻¹ intermediate current step. The electrochemical galvanostatic intermittent titration technique (GITT) has been employed for the first time to draw a rationale between the enhanced performance and the increased mobility in the rGO wrapped composite (Sb₂Se₃-rGO) compared to bare Sb₂Se₃. GITT analysis reveals higher Na⁺ diffusion coefficients (approx. 30 fold higher) in the case of Sb₂Se₃-rGO as compared to bare Sb₂Se₃ throughout the operating voltage window. For Sb₂Se₃-rGO the diffusion coefficients in the range of 8.0×10⁻¹⁵ cm² s⁻¹ to 2.2×10⁻¹² cm² s⁻¹ were observed, while in case of bare Sb₂Se₃ the diffusion coefficients in the range of 1.6×10⁻¹⁵ cm² s⁻¹ to 9.4×10⁻¹⁵ cm² s⁻¹ were observed.     

Trace determination of parabens in cosmetics and personal care products using fabric‐phase sorptive extraction and high‐performance liquid chromatography with UV detection

A simple, fast, and sensitive analytical protocol using fabric‐phase sorptive extraction followed by high performance liquid chromatography with ultraviolet detection has been developed and validated for the extraction of five parabens including methylparaben, ethylparaben, propylparaben, butylparaben, and benzylparaben. In the present work, sol‐gel polyethylene glycol coated fabric‐phase sorptive extraction membrane is used for the preconcentration of parabens (polar) from complex matrices. The use of fabric‐phase sorptive extraction membrane provides a high surface area which offers high sorbent loading, shortened equilibrium time, and overall decrease in the sample preparation time. Various factors affecting the performance of fabric‐phase sorptive extraction, including extraction time, eluting solvent, elution time, and pH of the sample matrix, were optimized. Separation was performed using a mobile phase consisting of water:acetonitrile (63:37; v/v) at an isocratic elution mode at a flow rate of 0.9 mL/min with wavelength at 254 nm. The calibration curves of the target analytes were prepared with good correlation coefficient values (r² > 0.9955). The limit of detection values range from 0.252 to 0.580 ng/mL. Finally, the method was successfully applied to various cosmetics and personal care product samples such as rose water, deodorant, hair serum, and cream with extraction recoveries ranged between 88 and 122% with relative standard deviation <5%.