New method for sintering silica frits for capillary microcolumns

One of the main steps in the manufacture of robust and efficient packed capillary microcolumns for electro- and capillary chromatography is the generation of porous devices to retain the packed beds. Frits based on sintered silica particles have been found to give the best results in terms of mechanical resistance and efficiency. The conventional procedure to produce these kinds of frits consists in a radial heating of the packed material with either a flame or an electrical resistance, but the frits thus obtained have many drawbacks as a result of the procedure rather than the silica per se as the base material. In the present work we investigated a new approach to produce silica-based retaining devices involving the frontal exposure of a short silica-particle bed packed at the end of a capillary tube. The capillary is radially insulated and frontally exposed to the heat of a muffle oven, generating a transfer of heat that is not radial but rather throughout the capillary axis. This procedure resulted in substantial advantages: an improved radial homogeneity, a protection of the external polyimide, and a generation of extremely short (400–600 μm) frits that were highly permeable and avoided bubble formation.     

An efficient synthesis of highly functionalized chiral lactams

A new method was developed to synthesize highly functionalized lactams via a one pot reductive amination/lactam formation reaction. This methodology is amenable for parallel synthesis and was used to prepare a large number of lactam analogs in a library format with good ee (de) retention.     

The formation of non-soluble complexes between polyethyleneimine-anions and their potential use to isolate enzymes

The aqueous solution behavior of polyethyleneimine (a synthetic cationic polymer) in the presence of anions with two or more electrical charges (citrate, phosphate, sulphate, malate, malonate and succinate) was studied by means of turbidimetry and light scattering. Polyethyleneimine forms non-soluble complexes with these anions, which behave as a pseudo-polyampholyte with an isoelectrical pH value dependent on the type of anion. The effect of pH, polymer concentration and ionic strength on the non-soluble complexes formation was examined. The complex precipitation pH range was between 3.5 and 8.0 and also depended on the type of anion. The complex formation was inhibited by the ionic strength in agreement with the electrostatic mechanism of the non-soluble complex formation. Model proteins with isoelectric pH from 1 to 10 were assayed in orden to be precipitated by these complexes. It was found that the non-soluble polyethyleneimine-anion complexes have the property to precipitate macromolecules charged with an opposite electrical charge.     

New dendronized polymers from acrylate Behera amine and their ability to produce visco-elastic structured fluids when mixed with CTAT worm-like micelles

Two new water soluble dendronized polymers (PLn) from acrylate Behera amine monomer of different molecular weights were successfully synthesized. The polymers were characterized by FTIR, NMR, GPC and DLS. Both GPC and DLS results indicated that these PLn have a remarkable tendency to form aggregates in solution that lead to apparent molecular weights that are much higher than their theoretical values, as well as large diameters in solution. However, the addition of any PLn to water did not cause any increase in viscosity up to concentrations of 1000 ppm. The possible interactions of PLn with the cationic surfactant CTAT were explored by solution rheometry. A synergistic viscosity enhancement was found by adding small amounts of dendronized PLn polymers to a CTAT solution composed of entangled worm-like micelles. The highest association tendency with CTAT was found for PL1 at the maximum polymer concentration before phase separation (i.e., 100 ppm). The solution viscosity at low-shear rates could be increased by an order of magnitude upon addition of 100 ppm of PL1 to a 20mM CTAT solution. For this mixture, the fluid obtained was highly structured and exhibited only shear thinning behavior from the smallest shear rates employed. These PL1/CTAT mixtures exhibited an improved elastic character (as determined by dynamic rheometry) that translated in a much longer value of the cross-over relaxation time and a pronounced thixotropic behavior which are indicative of a strong intermolecular interaction. In the case of the polymer with a higher theoretical molecular weight, PL2, its association with CTAT leads to an extraordinary doubling of solution viscosity with just 0.25 ppm polymer addition to a 20mM CTAT solution. However, such synergistic viscosity enhancement saturated at rather low concentrations (25 ppm) indicating an apparent lower solubility as compared to PL1, a fact that may be related to its higher molecular weight.     

Synthesis of chiral mesoporous silicas with oligo(saccharide) surfaces and their use in separation of stereoisomers

Novel chiral mesoporous silicas (SBA-15 motif) with chemically bonded oligo(saccharides) (1, 3, and 7 glucose units) were obtained through the cocondensation of organosilicon derivatives of the oligo(saccharides) and silica precursors in the presence of polymer surfactant template under mild acidic conditions. The pore order and structure of the materials prepared were characterized by transmission electron microscopy and nitrogen adsorption. The direct application of the oligo(saccharide)-grafted SBA-15 stationary phases in the HPLC separations of stereoisomers was demonstrated for the first time.     

Time-resolved study of excited states of N2 near its first ionization threshold

Two-photon, two-color double-resonance ionization spectroscopy combining synchrotron vacuum ultraviolet radiation with a tunable near-infrared (NIR) laser has been used to investigate gerade symmetry states of the nitrogen molecule. The rotationally resolved spectrum of an autoionizing (1)Σ(g)(-) state has been excited via the intermediate c(4) (v = 0) (1)Π(u) Rydberg state. We present the analysis of the band located at T(v) = 10,800.7 ± 2 cm(-1) with respect to the intermediate state, 126,366 ± 11 cm(-1) with respect to the ground state, approximately 700 cm(-1) above the first ionization threshold. From the analysis a rotational constant of B(v) = 1.700 ± 0.005 cm(-1) has been determined for this band. Making use of the pulsed structure of the two radiation beams, lifetimes of several rotational levels of the intermediate state have been measured. We also report rotationally-averaged fluorescence lifetimes (300 K) of several excited electronic states accessible from the ground state by absorption of one photon in the range of 13.85-14.9 eV. The averaged lifetimes of the c(4) (0) and c(5) (0) states are 5.6 and 4.4 ns, respectively, while the b(') (12), c(')(4) (4, 5, 6), and c(')(5) (0) states all have lifetimes in the range of hundreds of picoseconds.     

Synthesis and ring-chain-ring tautomerism of bisoxazolidines, thiazolidinyloxazolidines, and spirothiazolidines

The synthesis of fused heterocycles such as thiazolidinyl-oxazolidine 3 is described starting from Tris·HCl. The mercaptomethyl bisoxazolidine 8 was found to convert to the corresponding thiazolidinyloxazolidine 3 and the spiro-heterocycle 4 by a ring-chain-ring tautomerism, depending on the electronic nature of the ring substituents as well as the reaction conditions. This equilibration pathway is absent in the hydroxymethyl bisoxazolidines 2. Computational studies confirm that both kinetic and thermodynamic control features play a role in the product distribution.     

A delafossite-based copper catalyst for sustainable Cl2 production by HCl oxidation

A copper catalyst based on a delafossite precursor (CuAlO(2)) displays high activity and extraordinary lifetime in the gas-phase oxidation of HCl to Cl(2), representing a cost-effective alternative to RuO(2)-based catalysts for chlorine recycling.     

Efficient recycling of a chiral palladium catalytic system for asymmetric allylic substitutions in ionic liquid

Chiral carbohydrate-based diphosphites were used for Pd-catalysed asymmetric allylic substitution (alkylation, amination, phosphination) in neat ionic liquids (ILs). Pyrrolidinium-based IL led to the best activities, allowing an efficient catalyst immobilization. In the allylic amination (TOF > 3100 h(-1)), the catalyst could be recycled nine times preserving both activity and enantioselectivity.