Nanostructure of polysaccharide complexes

The interaction of gum arabic (GA) with chitosan (Ch) of different degree of deacetylation was studied by turbidity measurements, dynamic light scattering and atomic force microscopy. The structure of the complexes was found to be directly related to the charge density of chitosan molecules. Gum arabic and chitosan with a degree of deacetylation of 75% form soluble complexes with a loosely globular structure of about 250 nm, at weight ratios up to 1.2, if the concentrations are kept low (total biopolymer concentration up to 0.06%). If chitosan has a higher charge density (degree of deacetylation of 93%), colloidal particles are formed, independently of the polymer concentration or ratio. At low concentrations and GA/Ch ratios of 1 or 1.2, the particles have diameters of 200-250 nm. The formation of soluble complexes is attributed to a chitosan lower charge density and the presence of non-charged monomers, which prevent the efficient self-assembly of the macromolecules.     

In-vial pyrolysis (PyroVial) with pre- and post-sample treatment combined with different chromatographic techniques

A new generic pyrolysis unit (PyroVial) is presented. Pyrolysis is carried out in a 2 mL autosampler vial placed in a XYZ robot for automated pyrolysis as well as for pre- and post-pyrolysis treatment of the sample. Analysis of the volatiles is performed by headspace analysis while the semi- and non-volatiles are extracted from the pyrolysate with an organic solvent. The features of the PyroVial are such that all chromatographic techniques can be applied. The pyrolysis unit is discussed in terms of its technical features and its performance is illustrated with applications including conventional pyrolysis, in situ and post-pyrolysis derivatization, reaction pyrolysis and catalytic cracking.     

Adsorption of phenol on supercritically activated carbon fibres: effect of texture and surface chemistry

The influence of texture and surface chemistry on the phenol adsorption capacity of activated carbon fibres (ACFs) was studied. ACFs were prepared by carbonization of a phenolic textile fibre under nitrogen flow, followed by activation with H(2)O and CO(2) (under atmospheric pressure and supercritical state). The materials were characterised by N(2) and CO(2) adsorption, and by temperature programmed desorption studies. A strong correlation between the amount of adsorbed phenol and the micropore volume has been observed. The relationship between surface oxygen concentration and amount of physisorbed and chemisorbed phenol was assessed, and it was shown that higher amounts of surface oxygen groups decreased the phenol chemisorption capacity of ACFs.     

Molecular aspects of the interaction between plants sterols and DPPC bilayers: an experimental and theoretical approach

The effect of sterols composition in a lipid bilayer was investigated on membranes of 1,2-dipalmitoyl-sn-glycero-3-phosphocholine (DPPC) and mixtures with the plant sterols β-sitosterol and stigmasterol. Differential scanning calorimetry, 1,6-diphenyl-1,3,5-hexatriene (DPH) fluorescence polarization and infrared spectroscopy studies showed that both sterols changed the packing of the membrane and the hydration of the polar headgroup of the phospholipids, disordering the gel phase and, vice versa, ordering the membrane in the liquid crystalline phase. In all cases some differences among β-sitosterol and stigmasterol could be observed, being β-sitosterol slightly more efficient than stigmasterol in ordering a fluid membrane, bringing the membrane to a more packed liquid ordered phase. Molecular dynamic simulations were carried out to better characterize the distinct behavior of both sterols in a DPPC-membrane. The calculated parameters agreed quite well with the experimental results and a molecular model is proposed to explain differences in the sterols molecules and their effect on the DPPC-bilayer.     

Electrokinetic properties of wavellite and its floatability with cationic and anionic collectors

The reverse apatite flotation with fatty acids has been widely used for the reduction of phosphorus content of magmatic origin iron ores. However, the occurrence of phosphorus intensely disseminated as secondary minerals such as wavellite renders the anionic reverse flotation a challenge. Zeta potential measurements and microflotation tests of wavellite with the use of anionic and cationic collectors were carried out in this work. The wavellite's IEP value was achieved at pH 4.5. Below the IEP value, the surface positively charged sites are made up of aluminum ions. The species H(+), Al(OH)(2)(+), Al(OH)(2+), Al(3+), OH(-), H(2)PO(4)(-), HPO(4)(2-), and PO(4)(3-) play a role in the protonation and deprotonation reactions that will determine the wavellite-solution interface properties. The highest values of wavellite's floatability under basic pH conditions were achieved in the presence of cationic collectors (1 × 10(-4) mol L(-1)). The formation of surface complexes and the precipitation of insoluble salt of aluminum onto wavellite surface seems to be the most likely hypothesis for the chemical nature interactions between amines and wavellite. The surface formation of aluminum oleate on the wavellite's surface seems to be the most probable hypothesis for the adsorption mechanism and the resultant high floatability of wavellite between pH 7.5 and pH 10.0 in the presence of sodium oleate (1 × 10(-4) mol L(-1)). The results showed that the cationic reverse flotation of secondary phosphates is a promising route to reduce the phosphorus content of iron ores from deposits that underwent a supergene enrichment process, since wavellite floatability in the alkaline pH range, using amine as collector, was not significantly affected by the presence of corn starch.     

New synthesis and reactivity of 3‐bromoacetyl‐4‐hydroxy‐6‐methyl‐2H‐pyran‐2‐one with binucleophilic amines

3‐(Bromoacetyl)‐4‐hydroxy‐6‐methyl‐2H‐pyran‐2‐one was synthesized by the reaction of dehydroacetic acid (DHAA) with bromine in glacial acetic acid. Novel heterocyclic products were synthesized from the reaction of bromo‐DHAA with alkanediamines, phenylhydrazines, ortho‐phenylenediamines, and ortho‐aminobenzenethiol. The obtained new products 3‐(2‐N‐substituted‐acetyl)‐4‐hydroxy‐6‐methyl‐2H‐pyran‐2‐ones, 4‐hydroxy‐3‐[1‐hydroxy‐2‐(2‐phenylhydrazinyl)vinyl]‐6‐methyl‐2H‐pyran‐2‐one, 1‐(2,4‐dinitrophenyl)‐7‐methyl‐2,3‐dihydro‐1H‐pyrano[4,3‐c]pyridazine‐4,5‐dione, 3‐(3,4‐dihydroquinoxalin‐2‐yl)‐4‐hydroxy‐6‐methyl‐2H‐pyran‐2‐one/3‐(3,4‐dihydroquinoxalin‐2‐yl)‐6‐methyl‐2H‐pyran‐2,4(3H)‐dione, 6‐methyl‐3‐(3,4‐dihydroquinoxalin‐2‐yl)‐2H‐pyran‐2,4(3H)‐dione, and (E)‐3‐(2H‐benzo[b][1,4]thiazin‐3(4H)‐ylidene)‐6‐methyl‐2H‐pyran‐2,4(3H)‐dione were fully characterized by IR, ¹H and ¹³C NMR, and mass spectra. J. Heterocyclic Chem., 2011.     

Fluoride-conversion synthesis of homogeneous actinide oxide solid solutions

The synthesis of (U,Th)O(2) solid solutions at a relatively low temperature of 1100 °C using a new technique is described. First, separate actinide oxides were reacted with ammonium hydrogen fluoride to form ammonium actinide fluorides at room temperature. Subsequently, this fluoride was converted to an actinide oxide solid solution using a two-phase reaction process, which involved heating of the fluoride first at 610 °C in static air followed by heating at 1100 °C in flowing argon. Oxide solid solutions of UO(2) and ThO(2) were synthesized for a ThO(2) content from 10 to 90 wt %. Microscopic investigation showed that the (U,Th)O(2) solid solutions synthesized using this method had high crystallinity and homogeneity up to nanoscale.     

Synthesis, antimicrobial and antiproliferative activity of novel silver(I) tris(pyrazolyl)methanesulfonate and 1,3,5-triaza-7-phosphadamantane complexes

Five new silver(I) complexes of formulas [Ag(Tpms)] (1), [Ag(Tpms)(PPh(3))] (2), [Ag(Tpms)(PCy(3))] (3), [Ag(PTA)][BF(4)] (4), and [Ag(Tpms)(PTA)] (5) {Tpms = tris(pyrazol-1-yl)methanesulfonate, PPh(3) = triphenylphosphane, PCy(3) = tricyclohexylphosphane, PTA = 1,3,5-triaza-7-phosphaadamantane} have been synthesized and fully characterized by elemental analyses, (1)H, (13)C, and (31)P NMR, electrospray ionization mass spectrometry (ESI-MS), and IR spectroscopic techniques. The single crystal X-ray diffraction study of 3 shows the Tpms ligand acting in the N(3)-facially coordinating mode, while in 2 and 5 a N(2)O-coordination is found, with the SO(3) group bonded to silver and a pendant free pyrazolyl ring. Features of the tilting in the coordinated pyrazolyl rings in these cases suggest that this inequivalence is related with the cone angles of the phosphanes. A detailed study of antimycobacterial and antiproliferative properties of all compounds has been carried out. They were screened for their in vitro antimicrobial activities against the standard strains Enterococcus faecalis (ATCC 29922), Staphylococcus aureus (ATCC 25923), Streptococcus pneumoniae (ATCC 49619), Streptococcus pyogenes (SF37), Streptococcus sanguinis (SK36), Streptococcus mutans (UA159), Escherichia coli (ATCC 25922), and the fungus Candida albicans (ATCC 24443). Complexes 1-5 have been found to display effective antimicrobial activity against the series of bacteria and fungi, and some of them are potential candidates for antiseptic or disinfectant drugs. Interaction of Ag complexes with deoxyribonucleic acid (DNA) has been studied by fluorescence spectroscopic techniques, using ethidium bromide (EB) as a fluorescence probe of DNA. The decrease in the fluorescence of DNA-EB system on addition of Ag complexes shows that the fluorescence quenching of DNA-EB complex occurs and compound 3 is particularly active. Complexes 1-5 exhibit pronounced antiproliferative activity against human malignant melanoma (A375) with an activity often higher than that of AgNO(3), which has been used as a control, following the same order of activity inhibition on DNA, i.e., 3 > 2 > 1 > 5 > AgNO(3)? 4.     

Electronic and vibrational spectroscopy of intermediates in methane-to-methanol conversion by CoO+

At room temperature, cobalt oxide cations directly convert methane to methanol with high selectivity but very low efficiency. Two potential intermediates of this reaction, the [HO-Co-CH(3)](+) insertion intermediate and [H(2)O-Co=CH(2)](+) aquo-carbene complex are produced in a laser ablation source and characterized by electronic and vibrational spectroscopy. Reaction of laser-ablated cobalt cations with different organic precursors seeded in a carrier gas produces the intermediates, which subsequently expand into vacuum and cool. Ions are extracted into a time-of-flight mass spectrometer and spectra are measured via photofragment spectroscopy. Photodissociation of [HO-Co-CH(3)](+) in the visible and via infrared multiple photon dissociation (IRMPD) makes only Co(+) + CH(3)OH, while photodissociation of [H(2)O-Co=CH(2)](+) produces CoCH(2)(+) + H(2)O. The electronic spectrum of [HO-Co-CH(3)](+) shows progressions in the excited state Co-C stretch (335 cm(-1)) and O-Co-C bend (90 cm(-1)); the IRMPD spectrum gives ν(OH) = 3630 cm(-1). The [HO-Co-CH(3)](+)(Ar) complex has been synthesized and its vibrational spectrum measured in the O-H stretching region. The resulting spectrum is sharper than that obtained via IRMPD and gives ν(OH) = 3642 cm(-1). Also, an improved potential energy surface for the reaction of CoO(+) with methane has been developed using single point energies calculated by the CBS-QB3 method for reactants, intermediates, transition states and products.     

Implementation of the analytic energy gradient for the combined time-dependent density functional theory/effective fragment potential method: application to excited-state molecular dynamics simulations

Excited-state quantum mechanics/molecular mechanics molecular dynamics simulations are performed, to examine the solvent effects on the fluorescence spectra of aqueous formaldehyde. For that purpose, the analytical energy gradient has been derived and implemented for the linear-response time-dependent density functional theory (TDDFT) combined with the effective fragment potential (EFP) method. The EFP method is an efficient ab initio based polarizable model that describes the explicit solvent effects on electronic excitations, in the present work within a hybrid TDDFT/EFP scheme. The new method is applied to the excited-state MD of aqueous formaldehyde in the n-π* state. The calculated π*→n transition energy and solvatochromic shift are in good agreement with other theoretical results.