Ultrasound assisted syntheses of a nano-structured two-dimensional mixed-ligand cadmium(II) coordination polymer and direct thermolyses for the preparation of cadmium(II) oxide nanoparticles

A nano-sized mixed-ligand Cd(II) coordination polymer, {[Cd(bpa)(4,4′-bipy)₂(H₂O)₂](ClO₄)₂}_n (1); bpa = trans-1,2-bis(4-pyridyl)ethane and 4,4′-bipy = 4,4′-bipyridine, has been synthesized by a sonochemical method and characterized by IR and ¹H NMR spectroscopy. Compound 1 grows in one dimension by two different bridging ligands, 4,4′-bipy and bpa. The thermal stability of compound 1 in the bulk form and nano-sized was studied by thermogravimetric (TG) and differential thermal analysis (DTA). The crystallinity of this compound was studied by X-ray powder diffraction and compared with an XRD simulation of the single crystal data. CdO nanoparticles were obtained by direct calcination at 500 °C and decomposition in oleic acid at 200 °C of the nano-sized compound 1. The obtained cadmium(II) oxide nano-particles were characterized by X-ray diffraction (XRD) and scanning electron microscopy (SEM).     

Synthesis and application of a novel solid-phase microextraction adsorbent: hollow fiber supported carbon nanotube reinforced sol-gel for determination of phenobarbital

The present study reports the development, validation and application of a new green liquid chromatographic method for the determination of glutathione (GSH) in vegetable samples. In this work we introduce—for the first time—ethyl propiolate (EP) as an advantageous post-column derivatization reagent for thiolic compounds. GSH (t_R = 6.60 min) and N-acetylcysteine (NAC, internal standard) (t_R = 11.80 min) were separated efficiently from matrix endogenous compounds by using a 100% aqueous mobile phase (0.1%, v/v CH₃COOH in 1 mmol L⁻¹ EDTA, Q_V = 0.5 mL min⁻¹) and a Prevail^® reversed phase column that offers the advantage of stable packing material in aqueous mobile phases. The parameters of the post-column reaction (pH, amount concentration of the reagent, flow rates, length of the reaction coil and temperature) were studied. The linear determination range for GSH was 1–200 μmol L⁻¹ and the LOD was 0.1 μmol L⁻¹ (S/N = 3). Total endogenous GSH was determined in broccoli, potato, asparagus and Brussels sprouts using the standards addition approach. The accuracy was evaluated by both recovery experiments (R = 91–110%) and comparison to an o-phthalaldehyde/glycine corroborative post-column derivatization fluorimetric method.     

Synthesis and application of a novel solid-phase microextraction adsorbent: Hollow fiber supported carbon nanotube reinforced sol–gel for determination of phenobarbital

A novel solid-phase microextraction technique using a hollow fiber-supported sol–gel combined with multi-walled carbon nanotubes was employed in the determination of phenobarbital in wastewater. In this new technique, a silica-based, organic–inorganic polymer containing functionalized multi-walled carbon nanotubes (MWCNTs) was prepared with sol–gel technology via the reaction of tetraethylorthosilicate (TEOS) with an acidic catalyst (HCl). This sol was injected into a polypropylene hollow fiber segment for in situ gelation. This device operated in direct immersion sampling mode. The experimental setup is simple and affordable, and the device is disposable, so there is no risk of cross-contamination or carry-over. Parameters affecting extraction such as pH of the aqueous solution, ageing and extraction times, aqueous sample volume, agitation speed and carbon nanotube amount were optimized. Linearity was observed over a range of 0.50–5000 ng mL⁻¹, with an estimation coefficient (r²) higher than 0.982. The limit of detection (LOD) was 0.32 ng mL⁻¹ (n = 5), and repeatability (RSD% = 2.9) was from the average of three levels of analyte concentrations (1, 1000 and 4500 ng mL⁻¹) with three replicates for each within a single day. Finally, a pre-concentration factor of 2100 was obtained for phenobarbital.     

Erdős–Gyárfás conjecture for some families of Cayley graphs

The Paul Erd?s and András Gyárfás conjecture states that every graph of minimum degree at least 3 contains a simple cycle whose length is a power of two. In this paper, we prove that the conjecture holds for Cayley graphs on generalized quaternion groups, dihedral groups, semidihedral groups and groups of order \(p^3\).     

Comprehensive DFT calculations on organic sulfuric acid derivatives to design of powerful neutral organic superacids

In order to examine the acidity of organic sulfuric acid derivatives in gas phase, comprehensive density functional theory (DFT) calculations at B3LYP/6-31++G(d,p) level have been undertaken. In the title compounds, one of the oxygen atoms is substituted by an 1,3-cyclopentadiene group. The focus of this paper is on DFT studies of two classes of sulfuric acid derivatives: dithionic and peroxydisulfuric acids. Tautomers of proposed organic sulfuric acids are also investigated. DFT calculations indicate that the acidity of the proposed acids without any electron withdrawing groups on the ring was more than sulfuric acid.

     

Experimental study on the rheological behavior of nanolubricant-containing MCM-41 nanoparticles with viscosity measurement

In this study, the rheological behavior and viscosity of a stable nanofluid, which is prepared with the suspension of MCM-41 nanoparticles in SAE40 engine oil as base fluid, would be presented. Two-step method has been used to stabilize the nanoparticles in engine oil. To obtain structural and morphological properties of the synthesized nanoparticles, small-angle X-ray scattering, N₂ adsorption/desorption analysis and scanning electron microscopy have been done. Then, viscosity of nanofluids has been measured in temperature range of 25–55 °C, shear rates up to 13,000 s^?1 and different concentrations (0 mass%, 0.5 mass%, 1 mass%, 3 mass% and 5 mass% of MCM-41 nanoparticles). For all the samples, the shear stress versus shear rate diagrams showed that SAE40 oil has Newtonian behavior, in which adding mesoporous silica nanoparticles causes non-Newtonian or pseudoplastic behavior. The results declared that viscosity decreases with increasing temperature and increases with an enhancement in concentration. Furthermore, based on experimental results, an accurate correlation has been proposed to predict the viscosity of SAE40/MCM-41 nanolubricants.

     

Polypyrrole nanotube modified by gold nanoparticles for improving the neural microelectrodes

Journal of Solid State Electrochemistry - High selectivity and low impedance are preferred properties for neural microelectrodes. The localized and controlled release of drugs from the...     

Synthesis and crystal structure of a new copper (II) complex,designed to produce efficient successor of Cu2O,toward synergy of adsorption and photodegradation of MB

A new copper (II) coordination complex formulated as [Cu (dipic)(phen)(2-MePy)]. 2H₂O ( 1 ) where phen = 1, 10-phenanthroline, dipic²⁻ = pyridine-2,6-dicarboxylato and 2-MePy = 2-methyl pyrrole was synthesized through a simple and environment-friendly reaction under ultrasound irradiation. Also, complex 1 was synthesized by hydrothermal process at 120 °C for 3 days. The corresponding structure of complex 1 was characterized by elemental analysis, atomic absorption spectroscopy (AAS), inductively coupled plasma (ICP), conductivity measurement, Fourier-transform infrared spectroscopy (FT-IR), Raman spectroscopy, ultraviolet–visible spectroscopy (UV–Vis), thermal gravimetric analysis (TGA), differential thermal analysis (DTA), scanning electron microscopy (SEM), vibrating sample magnetometer (VSM) and fluorescence. The crystal structure of the hydrothermally synthesized complex was characterized by single crystal X-ray diffraction (SC-XRD(, which revealed a triclinic structure. In the remainder of this study, the Cu₂O nanoparticles have been prepared via thermal decomposition of hydrothermal and ultrasound complexes and characterized by ICP, FT-IR, powder X-ray diffraction (XRD), SEM and N₂ adsorption/desorption. Adsorption and visible-light-driven photocatalytic capabilities of two synthetic Cu₂O were investigated in the removal of MB from water. The result showed that the synthesized catalysts have good catalytic activity and the photocatalytic degradation is more effective in dye removal of MB compared with the adsorption.     

Synthesis,crystal structure and magnetic properties of a new tri‐nuclear iron (II,III) complex,a precursor for the preparation of superparamagnetic Fe3O4 nanoparticles applicable in the removal of Cd2+

This study reports the structural and spectroscopic characterization of a novel metal organic compound formulated as [Fe (bpy)₃] [Fe (dipic)₂]₂.7H₂O ( 1 ) (dipic = pyridine‐2,6‐dicarboxylate and bpy = 2,2^′‐bipyridine). 1 was investigated by elemental analysis, FT‐IR spectroscopy, powder X‐ray diffraction and single crystal X‐ray diffraction (SC‐XRD), which revealed a triclinic structure of expected composition. Thermal degradation of 1 was also investigated. Complex 1 was used as a precursor to prepare superparamagnetic nanoparticles of Fe₃O₄ by thermal analysis. The obtained Fe₃O₄ was characterized by Fourier transformed infrared spectroscopy (FT‐IR), powder X‐ray diffraction (XRD) and scanning electron microscopy (SEM). Fe₃O₄ nanoparticles were used as a nano‐adsorbent to remove Cd²⁺ from water at room temperature. The results showed that this nano‐adsorbent is effective in removing Cd²⁺ from contaminated water sources, and that the maximal effectivity of adsorption occurs at pH = 6. Magnetic measurements of complex 1 and Fe₃O₄ nanoparticles at room temperature revealed paramagnetic and superparamagnetic behavior, respectively.     

Structural,electrical and optical properties of Lin@C20 (n = 1–6) nanoclusters

The current research was undertaken to investigate the structural, electrical, and optical properties of C₂₀ fullerene decorated with different numbers of lithium (Li) atoms on its surface. The stability of the structure increased as the number of lithium atoms increased. Increasing the number of lithium atoms around C₂₀ from one to four slightly increased the E_g (energy gap between the highest occupied molecular orbital and the lowest unoccupied molecular orbital). Increasing the number to five or six narrowed the E_g. The electrical properties such as ionization potential (I), electron affinity (A), chemical potential (μ), global hardness (η), global softness (γ), global electrophilicity (ω), and electronegativity (χ) were also calculated. The polarizability (α) and first hyperpolarizability (β₀), which correspond to the linear optical and nonlinear optical properties, respectively, were also calculated. An intense increase in β₀ was recorded as the effect of five Li atoms adsorbed onto the C₂₀ surface. The results of this study can be used to design and fabricate nanomaterials with adjustable electro-optical properties.