稀土冠醚配合物的研究XXI. 单羟基冠醚与钙、稀土元素间的竞争配位及其钙配位化合物的晶体结构

研究了单羟基冠醚配位体6-羟基-2, 3, 9, 10-二苯并-1, 4, 8,11, 14-五氧杂环十六-2, 9-二烯(L)对钙和镧系元素的竞争配位反应, 发现该配位体在我们的实验条件下对钙的配位能力要明显大于对重稀土的配位能力; 同时研究了标题大环配位体和钙的配位化合物的晶体结构, 该配位化合物的分子结构式为[Ca(NO3)(H2O)L](NO3),Mr=528.47, 晶体属单斜晶系, α=1.5285(6), b=0.9713(3),c=1.5134(7)nm, β=98.79(3)ⅲ, V=2.2205nm^3, Dex=1.521g/cm^3,Dc=1.527g/cm^3, Z=4, 空间群为P21/c。     

稀土冠醚配合物的研究ⅩⅩⅠ.单羟基冠醚与钙、稀土元素间的竞争配位及其钙配位化合物的晶体结构

研究了单羟基冠醚配位体6-羟基-2,3,9,10-二苯并-1,4,8,11,14-五氧杂环十六-2,9-二烯(L)对钙和镧系元素的竞争配位反应,发现该配位体在我们的实验条件下对钙的配位能力要明显大于对重稀土的配位能力;同时研究了标题大环配位体和钙的配位化合物的晶体结构,该配位化合物的分子结构式为[Ca(NO3)(H2O)L](NO3),Mr=528.47,晶体属单斜晶系,a=1.5285(6),b=0.9713(3),c=1.5134(7)nm,β=98.79(3)°,V=2.2205nm3,Dex=1.531g/cm3,Dc=1.527g/cm3,Z=4,空间群为P21/c.     

亲水性交联聚合物载体的合成表征及其固定化α-淀粉酶

选用丙烯酰胺(AM)、N-羟基琥珀酰亚胺为单体(NHS),以N,N/-亚甲基双丙烯酰胺(MBAA)为交联剂,以乙醇水溶液为制孔剂条件下进行反相悬浮聚合,得到珠状共聚物载体,该载体是一种新的酶载体形式,在国内外的相关文献中均未见报道.用红外光谱、扫描电子显微镜测定其结构和表观活性.结果表明,在固定单体配比[W(AM)/W(NHS)=10∶1]和致孔剂用量的情况下,测得交联剂用量为4%时,交联聚合物载体的溶胀性最好(287.5%);交联剂用量为5%时,交联聚合物载体固定化α-淀粉酶表现出高的表观活性(522.53U/g).测得固定化酶载体表现出良好的操作稳定性.比较固定化酶和游离态酶的最适反应温度发现,固定化酶的最适反应温度(70℃)比游离态酶高20℃;固定化酶的最适反应pH值范围较游离态酶广.     

ICP-MS法快速测定丙烯腈/乙腈中的铁、铜

采用带八级杆碰撞/反应池(ORS)的电感耦合等离子体质谱法(ICP-MS),直接测定丙烯腈或乙腈产品中的Fe、Cu,标准加入法定量.结果表明,方法的线性范围宽,线性相关系数均大于0.999.2种元素的相对标准偏差均低于5%,加标回收率在90%~110%.该方法简便、快速、准确.     

活化条件对活性碳纳米管比表面积的影响

以KOH为活化剂, 研究了多壁碳纳米管在制备活性碳纳米管过程中四个重要影响因素: 活化剂用量、活化温度、活化时间和活化过程中保护气体的流速对所得活性碳纳米管BET比表面积的影响并解释了原因. 研究表明上述四个因素都会对活性碳纳米管的比表面积产生较大的影响, 其中活化剂用量的影响最大, 在研究范围内可引起比表面积增大约241 m²•g^-1. 在这四个影响因素中除活性碳纳米管的比表面积随活化温度的增加而不断增加外, 其他三个影响因素的变化都会使活性碳纳米管的比表面积出现最大值, 而且四个影响因素的改变, 都不改变活性碳纳米管的孔洞主要是中孔和大孔的特点.     

A New Convenient Method for the Resolution of 1, 1''''-Binaphthalene-2, 2''''-diol Via a Phosphite Using (-)-Menthol as Resolving Agent

Optically active 1,1-binaphthalene-2, 2-diol has become a quite important chiral source in different fields of chirotechnology, especially in asymmetric synthesis1. Its synthesis and resolution has been extensively studied and various resolution methods have been reported2. Among the reported resolution methods, the following three, namely, via the formation of phosphoric acid derivatives3, boric acid derivatives4 and inclusion complexes5, are the most important. OHOH+_( )-1(-)-(S)-1(+)-(R)…     

The Purification of Glucose Type Glycosyl Nitrate and the Synthesis of Spacer—armed N—Acetyllactosamines and Their Dimers

Our previous paper1,2reported the results of selective synthesis of mannose type glycosides and their dimers in our attempt to synthesize derivatives of N-acetyllacto- samine, which could have potential activity of anti-metastasis3. Further studies on the glycosylation of the accepters exploiting glycosyl nitrate instead of the acetate as donor showed interesting chemoselectivity between the two kinds of donor, namely, the glucose type and the mannose type. The reactivity difference of the t…     

固氮酶及合成氨Fe催化剂中N2的络合位

用乙烯为探针研究了固氮酶中Ｎ２的键合位，结果表明，乙烯不能与Ｎ２在固氮酶体系中相竞争，提出Ｎ２在固氮酶中键合位很可能是蛋白键合ＦｅＭｏ－ｃｏ笼内６Ｆｅ位的μρ（η＾２，ε４）ｔ ３Ｆｅ＋１Ｍｏ位的μ４（η＾３，ε）方式，而不是笼口２Ｆｅ位的μ２（η＾２）方式，在合成氨Ｆｅ催化剂中Ｎ２的络事方式可能是μ６（η＾３，ε３ ）。     

SYNTHESIS OF SEGMENTED COPOLYMERS WITH POLYSULFONES CONTAINING BISPHENOL A OR PHENOLPHTHALEIN UNITS AS HARD SEGMENT

Two series of segmented copolymers with polysulfones, containing bisphenol A and phenol-phthalein units as hard segments respectively, were synthesized. Isocyanate-terminated polyoxy-propylene was used as soft segments for both series.     

NATIONAL STANDARD OF HEAT CAPACITY MEASUREMENT OF SOLIDS IN THE RANGE OF 4.2—90K——AN AUTOMATED ADIABATIC CALORIMETER FROM 25 TO 90K AND MOLAR HEAT CAPACITIES OF α-ALUMINA

The construction of an automated adiabatic calorimeter for heat capacity measurement ofsolids in the temperature range of 25- 90K is described in detail. The sample vessel of thecalorimeter has thin radial vanes which make no contact with its inner wall and are distrib-uted evenly, thus greatly improving the internal thermal equilibration of the vessel. Theprecision of temperature control for the adiabatic shields and electrical leads of the calori-metric system are heightened to a great extent by using the high precision ACD- 79 modeladiabatic controller specially developed by us for this purpose. Measurements of the heatcapacities of high purity α-Al_2O_3, one of the internationally-accepted standard referencematerials, agree with those of the National Bureau of Standards (NBS), USA within ±0.3%,demonstrating the reliability of this apparatus.