Emulsion polymerization of methyl methacrylate under pulsed microwave irradiation

Emulsion polymerization of methyl methacrylate (MMA) under pulsed microwave irradiation (PMI) with higher peak pulse power was studied. The effects of various parameters of PMI on the polymerization were analyzed and compared with that under conventional heating (CH) process. The results were summarized, as compared with that under CH, as follows. The amount of initiator used to reach constant conversion reduced by 50% at the same polymerization time; at the same initiator concentration 0.15 and 0.2 wt.%, the polymerization rate increased by 131% and 163%, respectively. The molecular weight of polymer obtained was 1.1-2.0 times larger than that under CH; at the same irradiation energy, the conversion achieved using a lower pulse power was greater than that using a higher pulse power. There seemed to be a factor of the irradiation energy efficiency; in other words, for the monomer conversion, the irradiation energy of low pulse power had a higher efficiency. The conversion achieved using a 3.5 μs pulse width was almost the same as that using a 1.5 μs pulse width. The results indicated that PMI had a significant non-thermal effect on the emulsion polymerization of MMA so as to effectively enhance the polymerization rate. The glass transition temperature (T_g), the polydispersity index (PDI) and the regularity of the polymer obtained using two processes were similar, indicating that the physical properties and microstructure of the polymer were not modified by the use of microwaves.     

化学计量学在分析化学中的应用

从化学定量构效关系、模式识别法、人工神经网络、波谱化学、多元校正分析法等方面对化学计量学在分析化学中的应用进行了综述。阐明了化学计量学在分析化学中的作用及广阔的应用前景。     

Contribution to the certification of B,Cd, Cu,Mg and Pb in a synthetic water sample,by use of isotope-dilution ICP-MS,for Comparison 12 of the International Measurement Evaluation Programme

The contribution of the Institute for Reference Materials and Measurements to the certification of the B, Cd, Cu, Mg, and Pb content of a synthetic water sample used in Comparison 12 of the International Measurement Evaluation Programme (IMEP-12) is described. The aim of the IMEP programme is to demonstrate objectively the degree of equivalence and quality of chemical measurements of individual laboratories on the international scene by comparing them with reference ranges traceable to the SI (Système International d'Unités). IMEP is organized in support of European Union policies and helps to improve the traceability of values produced by field chemical measurement laboratories. The analytical procedure used to establish the reference values for the B, Cd, Cu, Mg, and Pb content of the IMEP-12 sample is based on inductively coupled plasma-isotope-dilution mass spectrometry (ICP-IDMS) applied as a primary method of measurement. The measurements performed for the IMEP-12 study are described in detail. Focus is on the element boron, which is particularly difficult to analyze by ICP-MS because of potential problems of low sensitivity, high mass discrimination, memory effects, and abundance sensitivity. For each of the certified amount contents presented here a total uncertainty budget was calculated using the method of propagation of uncertainties according to ISO (International Organization for Standardization) and Eurachem guidelines. For all investigated elements with concentrations in the low micro g kg(-1) and mg kg(-1) range (corresponding to pmol kg(-1) to the high micro mol kg(-1) level), SI-traceable reference values with relative expanded uncertainties ( k=2) of less than 2 % were obtained.     

Rapid detection of Escherichia coliform with a bulk acoustic wave sensor based on the gelation of Tachypleus amebocyte lysate

A new sensing method (BAW-TAL technique), which combined the bulk acoustic wave (BAW) technique with the gelation reaction of Tachypleus amebocyte lysate (TAL), was used for viscosity and density measurement and applied to the detection of Escherichia coliform (E. coli). This method depended on the fact that the viscosity and density of the mixture increased, and as a result, the resonance frequency decreased correspondingly after TAL was mixed with the heated E. coli solution that contained endotoxin. Results showed that the frequency shift was linearly related to the logarithm of E. coli concentration in the range of 2.7x10(4)-2.7x10(8) cells/ml. The correlation coefficient was 0.996. This BAW-TAL method was compared with the standard pour plate counts (PPC) method. The proposed method was much more rapid and simpler for detection of E. coli than the traditional methods.     

细胞动力学研究VIII.Na2SeO3对黑根菌作用特征

The Characteristics of the action of Na2SeO3 on Rhizopus nigrocans has been studied by means of microcalorimetry, the relationship between growth rate constants and the concentration of Na2SeO3 is
k=0.03608exp[-0.003608(c+8.60)2]
It was found that Na2SeO3 of low concentration has promoting action on the growth of Rhizopus nigrocans cells, and high concentration of Na2SeO3 has inhibitory action. The study has provided a lot of information on the bioaffect of selenium and the research of toxicology.     

When does gradient Ricci soliton have one end?

Annals of Global Analysis and Geometry - In this paper, we study a problem of finding compact hypersurfaces of prescribed mean curvature with free boundary in a ball. We transform the problem to an...     

钼钨铌磷杂多化合物的研究（Ⅰ）：杂多酸的合成和表征

提出了分步酸化一分步加料合成[PNb_2Mo_xW_(10-x)O_(40)]~(5-)(x=0,2,4,6)系列杂多酸的方法,给出了最佳配料比和生成反应的pH值,并进行了红外、紫外、极谱、电位滴定及热稳定性研究。     

铟(Ⅲ)-向红菲啰啉络合物极谱吸附波的研究

在pH=3.8的磷酸柠檬酸盐缓冲体系中,铟(Ⅲ)-向红菲(口罗)啉络合物在单扫描示波极谱仪上于-0.67 V(vs.SCE)处产生一灵敏的吸附还原波,其二阶导数波灵敏度高,波形好.峰电位Ⅰ~O_P与钢(Ⅲ)浓度在 2.0X10~(-8)~2.0X10~(-6)mol/L范围内呈良好的线性关系,其检测限为8X10~(-9)mol/L铟(Ⅲ).该法用于试剂氧化锌和镀膜玻璃中铟(Ⅲ)的恻定,结果较好.     

REDUCING NONSELECTIVE PROTEIN ADSORPTION AND CELL ADHESION ON POLYACRYLONITRILE FILMS BY COPOLYMERIZATION OF ACRYLONITRILE WITH α-ALLYL GLUCOSIDE

In this work, the surface properties of novel sugar-containing polymers, α-allyl glucoside (AG)/acrylonitrile (AN)copolymers, were studied by contact angle, protein adsorption and cell adhesion measurements. It was found that the contactangle of the copolymer films decreased from 68° to 30° with the increase of AG content in the copolymer. The adsorptionamount of bovine serum albumin (BSA) and the adhesive macrophage onto the film surface also decreased significantly withincreasing α-allyl glucoside content from 0 to 42 wt% in the copolymer. These preliminary results reveal that both thehydrophilicity and the biocompatibility of polyacrylonitrile-based membranes could be improved by copolymerizing acrylonitrile with vinyl carbohydrates.