De novo sequencing of tryptic peptides sulfonated by 4-sulfophenyl isothiocyanate for unambiguous protein identification using post-source decay matrix-assisted laser desorption/ionization mass spectrometry

A simple method of solid-phase derivatization and sequencing of tryptic peptides has been developed for rapid and unambiguous identification of spots on two-dimensional gels using post-source decay (PSD) matrix-assisted laser desorption/ionization (MALDI) mass spectrometry. The proteolytic digests of proteins are chemically modified by 4-sulfophenyl isothiocyanate. The derivatization reaction introduces a negative sulfonic acid group at the N-terminus of a peptide, which can increase the efficiency of PSD fragmentation and enable the selective detection of only a single series of fragment ions (y-ions). This chemically assisted method avoids the limitation of high background normally observed in MALDI-PSD spectra, and makes the spectra easier to interpret and facilitates de novo sequencing of internal fragment. The modification reaction is conducted in C(18) microZipTips to decrease the background and to enhance the signal/noise. Derivatization procedures were optimized for MALDI-PSD to increase the structural information and to obtain a complete peptide sequence even in critical cases. The MALDI-PSD mass spectra of two model peptides and their sulfonated derivatives are compared. For some proteins unambiguous identification could be achieved by MALDI-PSD sequencing of derivatized peptides obtained from in-gel digests of phosphorylase B and proteins of hepatic satellite cells (HSC).     

Microfluidics: from dynamic lattices to periodic arrays of polymer disks

We used coupling of flow and geometric confinement to assemble emulsion droplets in two-dimensional gliding lattices with a high degree of order and symmetry. Highly monodisperse discoid droplets with circular shapes were generated in a microfluidic flow-focusing device. Originally, close-packed lattices formed from these circular discoid droplets. Progressive confinement led to the gradual deformation of the circular disks: first, they elongated in the direction parallel to the direction of flow and then transformed into hexagons. Assembly driven by the combination of flow and confinement also allowed for the formation of lattices from droplets with a bimodal size distribution. We used photopolymerization of the monomer droplets to trap the lattice structure in the solid state and produce highly periodic arrays of solid polymer disks.     

动力学光度法测定痕量钴的研究

催化动力学法测定微量Co~(2+)已有报道,方法灵敏度一般在10~(-6)～10~(-10g)数量级,多数用于测定水、血液和高纯物质中的Co~(2+),而测定中药內的痕量CO~(2+)还未见报道。本文研究了氨水介质中Co~(2+)催化二苯偶氮酰肼氧化褪色的新指示反应及动力学条     

Phenyl and Phenylethyl Glycosides from Picrorhiza scrophulariiflora

Three new phenyl glycosides, scrophenoside A ( 1 ), B ( 2 ), and C ( 3 ), and two new phenylethyl glycosides, scroside D ( 4 ) and scroside E ( 5 ), were isolated from the stem of Picrorhiza scrophulariiflora Pennell (Scrophularlaceae), besides five known compounds. On the basis of spectroscopic evidence, the structures of the new compounds were elucidated as 4‐acetyl‐2‐methoxyphenyl 6‐O‐[4‐(β‐D ‐glucopyranosyloxy)vanilloyl]‐β‐D ‐glucopyranoside ( 1 ), 4‐acetylphenyl 6‐O‐[(E)‐p‐coumaroyl]‐β‐D ‐glucopyranoside ( 2 ), 4‐[(1R)‐ and (1S)‐1‐hydroxyethyl]‐2‐methoxyphenyl β‐D ‐glucopyranoside ( 3a and 3b , resp.), 2‐(3,4‐dihydroxyphenyl)ethyl O‐β‐D ‐glucopyranosyl‐(1→3)‐4‐O‐[(E)‐feruloyl]‐β‐D ‐glucopyranoside ( 4 ), and 2‐(3,4‐dihydroxyphenyl)ethyl O‐β‐D ‐glucopyranosyl‐(1→3)‐6‐O‐[(E)‐feruloyl]‐β‐D ‐glucopyranoside ( 5 ).     

Viscometric study of poly(vinyl chloride)/poly(vinyl acetate) blends in various solvents

The intermolecular interactions between poly(vinyl chloride) (PVC) and poly(vinyl acetate) (PVAc) in tetrahydrofuran (THF), methyl ethyl ketone (MEK) and N,N^′-dimethylformamide (DMF) were thoroughly investigated by the viscosity measurement. It has been found that the solvent selected has a great influence upon the polymer-polymer interactions in solution. If using PVAc and THF, or PVAc and DMF to form polymer solvent, the intrinsic viscosity of PVC in polymer solvent of (PVAc+THF) or (PVAc+DMF) is less than in corresponding pure solvent of THF or DMF. On the contrary, if using PVAc and MEK to form polymer solvent, the intrinsic viscosity of PVC in polymer solvent of (PVAc+MEK) is larger than in pure solvent of MEK. The influence of solvent upon the polymer-polymer interactions also comes from the interaction parameter term Δb, developed from modified Krigbaum and Wall theory. If PVC/PVAc blends with the weight ratio of 1/1 was dissolved in THF or DMF, Δb<0. On the contrary, if PVC/PVAc blends with the same weight ratio was dissolved in MEK, Δb>0. These experimental results show that the compatibility of PVC/PVAc blends is greatly associated with the solvent from which polymer mixtures were cast. The agreement of these results with differential scanning calorimetry measurements of PVC/PVAc blends casting from different solvents is good.     

Determination of Picogram-Levels of Acetylspiramycin in Human Urine and Serum by Flow Injection Chemiluminescence

A sensitive chemiluminescence method for the determination of acetylspiramycin is presented. It is based on the greatly enhancive effect of acetylspiramycin on the chemiluminescence reaction between luminol and hydrogen peroxide in the flow system. The increase in chemiluminescence intensity was linearly proportional to the acetylspiramycin concentration in the range from 10pg·mL^–1 to 2.0ng·mL^–1 (r²=0.9979). The detection limit was 3pg·mL^–1 (3). At a flow rate of 2.0mL·min^–1, the process of determination, including sampling and washing, could be performed in 0.5 min, and the relative standard deviations of seven replicates are less than 5.0%. The proposed method was applied successfully to the determination of acetylspiramycin in pharmaceutical preparations, human urine and serum without pre-treatment. It was found that the excretive ratio of acetylspiramycin reached its maximum 2.0 hours after having been administered orally, and the excretive ratio in 12.0 hours was 8.4.     

NiOxHy薄膜的电致变色特性和机理

运用循环伏安和阶跃电位方法研究了Ni（OH）2粉末靶直流溅射沉积的NiOxHy薄膜电致变色特性．结合实时的光透射-时间变化，发现着色后的薄膜在零外电势下有一自发的消色过程，该过程可能对应着Li 的自发注入。着色没有自发过程，获取了着消色状态Ni2p3／2和O1s的XPS谱，表明在着色态镍被氧化，消色态镍被还原，相应地氧的化学环境发生改变．     

CATIONIC CONDUCTIVITY FOR THE CROSSLINKED P [OLIGO (OXYETHYLENE) METHACRYLATE-COoMETHACRYLOYL ALKYLSULFONIC ACID LITHIUM]

Crosslinked copolymers with single Li~+-ionic conductivity were prepared from oligo (oxyethylene) methacrylate (MEO_n), methacryloyl alkylsulfonic acid lithium (SAMLi), and oligo (oxyethylene) dimethacrylate (DMEO_n). Li~+-ionic conductivity of the copolymer is improved by crosslinking and presented as a function of polymerization degree (n) in MEO_n, comonomeric salt concentration (O/Li), and crosslinking degree. The crosslinked copolymer P (0.7 MEO_(14)-0.3DMEO_(14)-SHMLi) without other small molecular additives exhibits an optimum Li~+-ionic conductivity of 1.2×10~(-6) S/cm at 25℃. Dc polarization test in the cell composed of Li/copolymer/Li shows a constant dc ionic conductivity which closes gradually to the ac one with decreasing dc polarization potential.     

Flow-injection analysis based on a membrane separation module and a bulk acoustic wave impedance sensor – determination of the volatile acidity of fermentation products

A novel flow-injection analysis (FIA) system has been developed for the rapid determination of the volatile acidity of some fermentation products like vinegars and juices. The proposed method is based on the diffusion of volatile acids, mainly acetic acid, across a PTFE gas-permeable membrane from an acid stream into an alkaline stream, and the acids trapped in the acceptor solution are determined online by a bulk acoustic wave impedance sensor based on changes in the conductivity of the solution. It exhibited a linear frequency response up to 10 mmol · L^–1 acetic acid with a detection limit of 50 μmol · L^–1, and the precision was better than 1% (RSD) at a through-put of 72 h^–1. The effects of operating voltage for the detector, cell constant of the electrode, composition of acceptor stream, flow rates and temperature on the FIA performance were also investigated. Received: 2 June 1997 / Revised: 7 July 1997 / Accepted: 12 July 1997     

A study of the chemiluminescence behavior of myoglobin with luminol and its analytical applications

A chemiluminescence signal at 425 nm was observed when ferric state myoglobin was mixed with luminol in alkaline medium. Because the signal was remarkably enhanced in the presence of Fe(CN)₆ ^4–, analytical applications were investigated in a flow-injection system. The increase in chemiluminescence was linearly dependent on myoglobin concentration in the range 0.1 to 100 nmol L^–1, and the limit of detection was 0.04 nmol L^–1 with relative standard deviation 3.2% (3). It was also found that binding of Mb with the ligands CN^–, SCN^–, and F^– significantly inhibited the chemiluminescence reaction. The linear dynamic ranges for the ligands were 1.0–300.0, 0.1–3.0, and 0.5–100.0 nmol L^–1, and the limits of detection (S/N=3) 0.4, 0.04, and 0.2 nmol L^–1, for F^–, CN^–, and SCN^–, respectively. The relative standard deviations were 5.32%, 6.13%, and 3.38% for 0.1 nmol L^–1 CN^–, 0.5 nmol L^–1 SCN^–, and 1.0 nmol L^–1 F^–, respectively. At a flow rate of 2.0 mL min^–1 the assay could be accomplished in 1 min, including sampling and washing. The method has been successfully applied to the determination of myoglobin in human urine and F^– in water samples. A possible mechanism of chemiluminescence production by myoglobin and luminol is presented.