一类哈密顿系统的Abel积分之比单调性的判据

研究了一类哈密顿系统的两个Abel积分比值的单调性的条件,指出这个单调性条件可由文中给出的两个判定函数直接确定.     

厚非线性介质瞬态热光非线性效应的研究

瞬态热光非线性效应是指由脉冲宽度可以和非线性效应的建立时间相比拟的纳秒脉冲激光入射产生的热光非线性效应.用Zscan法测量了不同厚度、不同束腰半径碘的酒精溶液的瞬态热光非线性效应曲线.从声波的传播方程和光波的非线性传播方程出发,用数值计算方法模拟了这一非线性过程.并对实验结果和数值模拟结果进行了比较 关键词： 瞬态热光非线性效应 非线性光学 数值计算     

Ar-buffer-assisted deposition of Cu13 on Cu(1 1 1) surfaces

In this paper, the deposition of Cu₁₃ onto Cu(1 1 1) surface through argon buffer layers was investigated by molecular dynamics (MD) simulations. The interactions between Cu-Cu, Cu-Ar, and Ar-Ar were described by Finnis-Sinclair (FS) tight-binding potential and L-J potential, respectively. The impact energy was chosen to be 2-6 eV/atom in order to compare with experimental results. It was observed that with Ar-buffer layers, the Cu cluster deposited on the surface may retain its free cluster symmetry (I_h). Whereas, on originally bare Cu surface, the deposited Cu cluster lost its original symmetry completely and was recrystalized to have the same fcc structure as the substrate. The Ar-buffer dissipates most of the translational energy of the incident cluster. Therefore, it prevents the cluster from being overheated upon impinging. Furthermore, the interaction between Ar and Cu benefits the confinement of the cluster structure. Our study shows that with Ar-buffer layers, the lateral spread of deposited clusters is 20% smaller than that on the bare Cu surface. This is consistent with the experimental findings.     

Single-frequency 1.25 W monolithic lasers at 1123 nm

Experimental investigation ofd Nd:YAG monolithic nonplanar ring lasers operated at 1123 nm wavelength is presented. Stable single-frequency 1123 nm laser output has been obtained with successful suppression of the strong 1064 nm radiation. Single-frequency output power of 1.25 W is demonstrated with a pump power of 3.98 W at 808 nm, which gives a slope efficiency of 39%. The laser frequency tuning range is over 3 GHz, and the average tuning rate with temperature is -2.6 GHz/ degrees C. A strong iodine absorption line can be covered within the laser frequency tuning range.     

A new myrsinol-type diterpene polyester from Euphorbia dracunculoides Lam

A new myrsinol-type diterpene polyester, 14-deoxo-3β-O-propinoyl-2α,5α,7β,15β-tetra-O-acetyl-14α-O-benzoyl-myrsinol (1), and its known analogue, 14-deoxo-3β-O-prorionyl-5α,15β-di-O-acetyl-7β-O-nicotinoyl-myrsinol-14β-acetate (2), together with a monoterpenoid, pubinernoid A (3), two indole alkaloids, neoechinulin A (4) and dihydroxyisoechinulin A (5), two benzene derivatives, siringin (6) and (3-methoxyphenyl) acetic acid (7), were isolated from the 70% acetone extract of the aerial parts of Euphorbia dracunculoides Lam. Their structures were elucidated on the basis of spectroscopic evidence and comparison with literature reports. The absolute configuration of 1 was deduced by comparing experimental and calculated ECD spectra. Among them, compounds 4 and 5 were first obtained from the plant source. In addition, the ¹³C NMR data of compound 2 was reported for the first time.     

The application of high-resolution mass spectrometry-based data-mining tools in tandem to metabolite profiling of a triple drug combination in humans

Patients are usually exposed to multiple drugs, and metabolite profiling of each drug in complex biological matrices is a big challenge. This study presented a new application of an improved high resolution mass spectrometry (HRMS)-based data-mining tools in tandem to fast and comprehensive metabolite identification of combination drugs in human. The model drug combination was metronidazole-pantoprazole-clarithromycin (MET-PAN-CLAR), which is widely used in clinic to treat ulcers caused by Helicobacter pylori. First, mass defect filter (MDF), as a targeted data processing tool, was able to recover all relevant metabolites of MET-PAN-CLAR in human plasma and urine from the full-scan MS dataset when appropriate MDF templates for each drug were defined. Second, the accurate mass-based background subtraction (BS), as an untargeted data-mining tool, worked effectively except for several trace metabolites, which were buried in the remaining background signals. Third, an integrated strategy, i.e., untargeted BS followed by improved MDF, was effective for metabolite identification of MET-PAN-CLAR. Most metabolites except for trace ones were found in the first step of BS-processed datasets, and the results led to the setup of appropriate metabolite MDF template for the subsequent MDF data processing. Trace metabolites were further recovered by MDF, which used both common MDF templates and the novel metabolite-based MDF templates. As a result, a total of 44 metabolites or related components were found for MET-PAN-CLAR in human plasma and urine using the integrated strategy. New metabolic pathways such as N-glucuronidation of PAN and dehydrogenation of CLAR were found. This study demonstrated that the combination of accurate mass-based multiple data-mining techniques in tandem, i.e., untargeted background subtraction followed by targeted mass defect filtering, can be a valuable tool for rapid metabolite profiling of combination drugs in vivo.     

Solid‐phase extraction based on a molecularly imprinted polymer for the selective determination of four benzophenones in tap and river water

This work reports the preparation of molecularly imprinted polymer particles for the selective extraction and determination of four benzophenones from aqueous media. The polymer was prepared by using 4‐vinylpridine as functional monomer, ethylene glycol dimethacrylate as cross‐linker, acetonitrile as porogenic solvent and 2,2’,4,4’‐tetrehydroxybenzophenone as template. Good specific adsorption capacity (Q_max = 27.90 μmol/g) for 2,2’,4,4’‐tetrehydroxybenzophenone was obtained in the sorption experiment and good class selectivity for 2,2’,4,4’‐tetrehydroxybenzophenone, 2,4‐dihydroxybenzophenone, 2,2’‐dihydroxy‐4‐methoxybenzophenone, 2,2’‐dehydroxy‐4,4’‐dimethoxybenzophenone was demonstrated by the chromatographic evaluation experiment. Factors affecting the extraction efficiency of the molecularly imprinted solid‐phase extraction procedure were investigated systematically. An accurate and sensitive analytical method based on the molecularly imprinted solid‐phase extraction coupled with high‐performance liquid chromatography and diode array detection has been successfully developed for the simultaneous determination of four benzophenones from tap water and river water with method detection limits of 0.25–0.72 ng/mL. The recoveries of benzophenones for water samples at two spiking levels (500 and 5000 ng/mL for each benzophenone) were in the range of 86.9–103.3% with relative standard deviations (n = 3) below 9.2%.     

Messung der dynamischen Eigenschaften verdünnter Polymerlösungen

Zusammenfassung Ein neuartiges Rheometer zur Ermittlung der rheologischen Eigenschaften von Polymerlösungen im linear-viskoelastischen Bereich wird vorgestellt. Durch Anwendung der Laser-Doppler-Anemometrie, die eine im hydro-dynamischen Sinn störungsfreie Meßmethode darstellt, ist es möglich, niedrig-viskose bis hin zu wasserähnlichen Proben zu vermessen.Zur Bewältigung der in großer Zahl anfallenden Daten und Rechenoperationen findet ein Mikrocomputer-System Verwendung. Es erledigt im einzelnen die Aufgaben Versuchsablauf-Steuerung, Meßwerterfassung, Auswertung, Dokumentation und graphische Darstellung der Ergebnisse.Anhand von Messungen an newtonschen Flüssigkeiten werden der Funktionsnachweis erbracht und die Betriebsbereiche der Ringspaltsysteme unterschiedlichen Durchmessers ermittelt.Die viskoelastischen Eigenschaften von wäßrigen Polyethylenoxid- und Polyacrylamid-Lösungen niedriger Viskosität lassen sich über einen Frequenzbereich von 0,1 bis 100 Hz messen. Die Ergebnisse werden mit Hilfe der komplexen Viskositätsfunktion dargestellt. Daraus läßt sich als gleichwertige Darstellung das diskrete Relaxationsspektrum eines konkreten Stoffgesetzes gewinnen.

---

A novel rheometer for determining the elastic characteristics of polymeric solutions in the linear-viscoelastic region is described. Laser-Doppler anemometry, which does not introduce hydrodynamic disturbances, is used to enable low viscosity liquids including water-like samples to be measured.A microcomputer system is utilized to control the experiments, store and analyse the measured data, and provide graphical representations of the results. Measurements on Newtonian liquids verified the validity of the method and allowed the operational regions of the annulus systems with different diameters to be determined.The elastic characteristics of low viscosity aqueous solutions of polyethyleneoxide and polyacrylamide can be measured at frequencies from 0.1 to 100 Hz. The results are presented using the complex viscosity function. As a result the discrete relaxation spectrum of a special material law can be obtained as an equivalent representation.