疏水缔合型增稠剂聚(丙烯酰胺-丙烯酸高级酯)的合成及增稠性能研究

采用沉淀聚合法合成了聚（丙烯酰胺－丙烯酸十四酯），聚（丙烯酰胺－丙烯酸十六酯）和聚（丙烯酰胺－丙烯酸十八酯），重点讨论了共聚物中疏水基团数量及疏水基团链长对增稠性能的影响。采用凯达尔定氮法和动态热分析（DMTA）测定了共聚物的组成及玻璃化温度。     

Preparation and characterization of trans-RhCl(CO)(TPPTS)2-intercalated layered double hydroxides

trans-RhCl(CO)(TPPTS)₂ (TPPTS=tris(m-sulfonatophenyl)phosphine) has been intercalated into Zn-Al layered double hydroxides (LDHs) by the method of ion exchange. The structure, composition and thermal stability of the composite material have been characterized by powder X-ray diffraction, Fourier transform infrared and ³¹P solid-state magic-angle spinning nuclear magnetic resonance spectroscopy, elemental analysis, thermogravimetry, and differential thermal analysis. The geometry of trans-RhCl(CO)(TPPTS)₂ was fully optimized using the PM3 semiempirical molecular orbital method, and a schematic model for the intercalated species has been proposed. The thermal stability of trans-RhCl(CO)(TPPTS)₂ is significantly enhanced by intercalation, which suggests that such materials may have prospective application as the basis of a supported catalyst system for the hydroformylation of higher olefins.     

Ti接枝MCM-41催化剂的结构设计及化学亲和选择性研究

 用二氯化钛茂作为活性物种的来源，利用Si－MCM－41催化剂表面羟基的反应性，得到了Ti接枝MCM－41催化剂的两种结构模型．结构表征结果表明，Ti接枝MCM－41催化剂不仅长程结构好，孔径分布均一，而且催化剂表面活性中心含量高．两种结构模型催化剂上芳烃羟化反应性能表明，Ti接枝MCM－41催化剂表面的亲水／憎水性可以在较宽的范围内调变，从而可实现控制芳烃羟化的化学亲和选择性．另外，研究结果还表明，Ti接枝MCM－41催化剂具有很好的活性稳定性．     

亚烷基卡宾与甲醛环加成反应机理的理论研究

用二阶微扰理论研究了单重态亚烷基卡宾与甲醛发生的三种环加成反应的机理 ，采用MP2/6－31G~*方法计算了势能面上各驻点的构型参数、振动频率和能量。根 据能量数据可以预言环加成反应（1）的a途径将是单重态亚烷基卡宾与甲醛环加成 反应的主要反应通道，该反应由两步组成：（I）亚烷基卡宾与甲醛生成了一富能 中间体（INT1a），是一无势垒的放热反应，（II）中间体异构化为产物亚烷基环 乙烷，其势垒为24.1 kJ·mol~(-1)(MP2/6-31G~*)。     

扫描近场光学显微镜对纳米结构的观察

光学显微镜在人们认识微观世界的过程中一直扮演着非常重要的角色．随着认识的深入，对空间分辨率的要求也越来越高．但是众所周知，普通光学显微镜（远场情况下）的分辨率受光的衍射效应所限制，一般可表达为0．61A／N．A．（约等于A／2，A为照射光的波长，N．A．为数值孔径）     

紫外光照处理对TiO2膜光伏性能的影响

近年来人们利用纳米晶TiO2电极取代普通的TiO2电极[1],使其太阳能电池的光电转换效率得到很大提高.纳米晶TiO2电极具有大量表面态,在化学上表现为Ti3+或Ti—OH,对于光生电荷的分离过程和迁移过程有重要影响.这些表面化学结构的变化可能会导致TiO2的光伏性能的变化.1997年Fujishima等[2]用紫外光照射TiO2膜使它具有超亲水的性质,结构分析表明,超亲水的原因在于光照使TiO2膜的表面形成Ti—OH[3].因此,在光照处理的同时可能会导致TiO2的光伏性的变化.本文对紫外光照处理TiO2膜的光伏性能进行了研究,并结合光诱导TiO2的亲水性变化对光伏性能变化的原因进行了讨论.     

N-TiO2/ZnO复合纳米管阵列的掺杂机理及其光催化活性

以ZnO纳米柱阵列为模板, 采用溶胶-凝胶法制备出TiO2/ZnO和N掺杂TiO2/ZnO的复合纳米管阵列. 扫描电镜(SEM)、X射线光电子能谱(XPS)和紫外-可见漫反射吸收光谱(UV-Vis)的结果表明: 两种阵列的纳米管均为六角形结构, 直径约为100 nm, 壁厚约为20 nm; 在N-TiO2/ZnO复合纳米管阵列中, 掺入的N离子主要是以N-Ox、N-C和N-N的形式化学吸附在纳米管表面, 仅有少量的N离子以取代式掺杂的方式占据TiO2晶格O的位置; 表面N物种形成的表面态能级和取代式掺杂导致带隙的窄化, 增强了纳米管阵列的光吸收效率, 促进了光生载流子的分离. 光催化实验结果表明, N离子的掺杂有利于N-TiO2/ZnO复合纳米管阵列光催化活性的提高.     

发用防晒剂DDABDT的反相高效液相色谱法测定

建立了反相高效液相色谱法测定发用防晒剂二甲基对胺基苯甲酰胺丙基十二烷基二甲胺甲苯磺酸盐(简称DDABDT)的方法.采用的色谱条件为色谱柱Symmetry C8柱,流动相为V(乙腈):V(10 mmol/L NaAc)=65:35溶液(含体积分数0.02%三氟乙酸,pH5.04),流速1.0 mL/min;检测波长305 nm;进样量20μL.DDABDT质量浓度为0.05～1000 mg/L时,其浓度与峰面积呈良好的线性关系(R2＞0.999),检出限为0.02 mg/L(S/N=3).洗发水A中DDABDT的回收率在98.0%～102%之间,发样提取液中DDABDT的平均回收率在85%～108%之间.洗发水中DDABDT浓度测定日内和日间相对标准分别为1.2%,3.4%.头发吸附DDABDT含量测定日内和日间相对标准偏差(RSD)分别为9.1%,9.8%.同时以高效液相色谱-电喷雾离子化质谱对色谱法测定样品的DDABDT峰进行了验证.该方法已用于洗发水及头发吸附DDABDT的分析.     

Maximum spectrum of continuous wavelet transform and its application in resolving an overlapped signal

To estimate the number of peaks and to find the individual peak positions in an overlapped signal, a new method called maximum spectrum of continuous wavelet transform (MSCWT) was developed by extracting the maximum coefficients of continuous wavelet transform (CWT). The peak position in MSCWT was the same as that in its original signal. In this process, CWT was performed not on a single dilation but on an appreciation dilation range. To obtain such a range, a new criterion was introduced to choose a center dilation, which was used to form the dilation range. If Cdilation denoted the center dilation, the proper dilation range was [Cdilation -6 +/- 2, Cdilation +1 +/- 1]. The Mexican Hat function was an analytical wavelet. Utilizing the information of the peak number and the position detected by MSCWT, a fitting route was performed to recover the original signal. One simulated and four true overlapped signals, including high performance liquid chromatography (HPLC), ultraviolet-visible (UV) spectrum, and differential pulse voltammetric (DPV), were processed, and the results indicated that MSCWT could detect an overlapped peak number and position, and the curve fitting based on information of MSCWT had a higher accuracy. The proposed method was an efficient one in resolving different types of overlapped signals.