Synthesis of heteroarylidene malonate derived bis(thiazolines) and their application in the catalyzed Friedel–Crafts reaction

A series of novel heteroarylidene malonate derived bis(thiazoline) ligands 1 and 2 were synthesized and applied to a Friedel-Crafts reaction between indole and alkylidene malonate. The Cu(OTf)₂ complex of ligand 2b bearing a benzyl group afforded moderate to excellent enantioselectivity for the adducts (up to >99% ee).     

Metabolite identification of artemether by data-dependent accurate mass spectrometric analysis using an LTQ-Orbitrap hybrid mass spectrometer in combination with the online hydrogen/deuterium exchange technique

Artemether (ARM), the O-methyl ether prodrug of dihydroartemisinin (DHA), is a first-line antimalarial drug used in areas of multi-drug resistance. Artemisinin drugs can be metabolized extensively in vivo and this seems related to their autoinduction pharmacokinetics. In the present study, the metabolite identification of ARM was performed by the generic data-dependent accurate mass spectrometric analysis, using high-resolution (HR) liquid chromatography/electrospray ionization mass spectrometry (LC/ESI-MS) and tandem mass spectrometry (MS/MS) LTQ-Orbitrap hybrid mass spectrometer in conjunction with online hydrogen (H)/deuterium (D) exchange for rapid structural characterization. The LC separation was improved allowing the separation of ARM parent drugs and their metabolites from their diastereomers. A total of 77 phase I metabolites of ARM were identified in rat liver microsomal incubates and rat urine, including dihydroartemisinin and artemisinin. In rat bile, 12 phase II metabolites were found. Accurate mass data were obtained in both full scan and HR-MS/MS mode to support assignments of metabolite structures. Online H/D exchange LC/HR-ESI-MS experiments provided additional evidence in differentiating dihydroxylated deoxy-ARM from mono-hydroxylated ARM. The results showed the main phase I metabolites of artemether are hydroxylated, dehydro, demethylated and deoxy products, and they will undergo subsequent phase II glucuronidation processes. Most metabolites were reported for the first time. This study also demonstrated the effectiveness of high-resolution mass spectrometry in combination with an online H/D exchange LC/HR-MS(n) technique in rapid identification of drug metabolites.     

Determination of radon using solid state nuclear tracks wireless sensing method

A highly sensitive and selective electrochemiluminescent (ECL) biosensor for the determination of adenosine was developed. Single DNA (capture DNA) was immobilized on the gold electrode through Au-thiol interaction at first. Another DNA modified with tris(2,2'-bipyridyl) ruthenium(II)-doped silica nanoparticles (Ru-SNPs) that contained adenosine aptamer was then modified on the electrode surface through hybridizing with the capture DNA. In the presence of adenosine, adenosine-aptamer complex is produced rather than aptamer-DNA duplex, resulting with the dissociation of Ru-SNPs-labeled aptamer from the electrode surface and the decrease in the ECL intensity. The decrease of ECL intensity has a direct relationship with the logarithm of adenosine concentration in the range of 1.0×10(-10) to 5.0×10(-6)molL(-1). The detection limit of the proposed method is 3.0×10(-11)molL(-1). The existence of guanosine, cytidine and uridine has little interference with adenosine detection, demonstrating that the developed biosensor owns a high selectivity to adenosine. In addition, the developed biosensor also demonstrates very good reusability, as after being reused for 30 times, its ECL signal still keeps 91% of its original state.     

Additive-free clicking for polymer functionalization and coupling by tetrazine-norbornene chemistry

Herein we report the use of a tetrazine-norbornene inverse electron demand Diels-Alder conjugation applied to polymer end-functionalization and polymer-polymer coupling. The reaction was found to be applicable to polymer-polymer coupling, as judged by SEC, DOSY NMR, and LCxSEC analyses, giving diblock copolymers by merely mixing the constituent homopolymers together under ambient conditions, using no catalyst, additive, or external stimulus.     

Ionic liquid-functionalized graphene as modifier for electrochemical and electrocatalytic improvement: comparison of different carbon electrodes

Electrochemical activities of typically electrochemical targets at three kinds of modified carbon electrodes, i.e. carbon ionic liquid electrode (CILE), graphene/carbon paste electrode (CPE), and ionic liquid-functionalized graphene (IL-graphene)/CPE, were compared in detail. The redox processes of the probes at IL-graphene/CPE were faster than those at CILE and graphene/CPE from cyclic voltammetry. An electrochemical method for the simultaneous determination of guanine and adenine was described with detection limits of 6.5 × 10⁻⁸ mol L⁻¹ (guanine) and 3.2 × 10⁻⁸ mol L⁻¹ (adenine). Single A → G mutation of sequence-specific DNA could be discriminated by the IL-graphene/CPE.     

Graphene-based immunosensor for electrochemical quantification of phosphorylated p53 (S15)

We reported a graphene-based immunosensor for electrochemical quantification of phosphorylated p53 on serine 15 (phospho-p53¹⁵), a potential biomarker of gamma-radiation exposure. The principle is based on sandwich immunoassay and the resulting immunocomplex is formed among phospho-p53 capture antibody, phospho-p53¹⁵ antigen, biotinylated phospho-p53¹⁵ detection antibody and horseradish peroxidase (HRP)-labeled streptavidin. The introduced HRP results in an electrocatalytic response to reduction of hydrogen peroxide in the presence of thionine. Graphene served as sensor platform not only promotes electron transfer, but also increases the surface area to introduce a large amount of capture antibody, thus increasing the detection sensitivity. The experimental conditions including blocking agent, immunoreaction time and substrate concentration have been optimized. Under the optimum conditions, the increase of response current is proportional to the phospho-p53¹⁵ concentration in the range of 0.2–10 ng mL⁻¹, with the detection limit of 0.1 ng mL⁻¹. The developed immunosensor exhibits acceptable stability and reproducibility and the assay results for phospho-p53¹⁵ are in good correlation with the known values. This easily fabricated immunosensor provides a new promising tool for analysis of phospho-p53¹⁵ and other phosphorylated proteins.     

Maintaining the predictive abilities of multivariate calibration models by spectral space transformation

In quantitative on-line/in-line monitoring of chemical and bio-chemical processes using spectroscopic instruments, multivariate calibration models are indispensable for the extraction of chemical information from complex spectroscopic measurements. The development of reliable multivariate calibration models is generally time-consuming and costly. Therefore, once a reliable multivariate calibration model is established, it is expected to be used for an extended period. However, any change in the instrumental response or variations in the measurement conditions can render a multivariate calibration model invalid. In this contribution, a new method, spectral space transformation (SST), has been developed to maintain the predictive abilities of multivariate calibration models when the spectrometer or measurement conditions are altered. SST tries to eliminate the spectral differences induced by the changes in instruments or measurement conditions through the transformation between two spectral spaces spanned by the corresponding spectra of a subset of standardization samples measured on two instruments or under two sets of experimental conditions. The performance of the method has been tested on two data sets comprising NIR and MIR spectra. The experimental results show that SST can achieve satisfactory analyte predictions from spectroscopic measurements subject to spectrometer/probe alteration, when only a few standardization samples are used. Compared with the existing popular methods designed for the same purpose, i.e. global PLS, univariate slope and bias correction (SBC) and piecewise direct standardization (PDS), SST has the advantages of implementation simplicity, wider applicability and better performance in terms of predictive accuracy.     

Hydrate phase equilibrium for the (hydrogen + tert-butylamine + water) system

The three-phase equilibrium conditions of ternary (hydrogen + tert-butylamine + water) system were first measured under high-pressure in a “full view” sapphire cell. The tert-butylamine–hydrogen binary hydrate phase transition points were obtained through determining the points of intersection of three phases (H–L_w–V) to two phases (L_w–V) experimentally. Measurements were made using an isochoric method. Firstly, (tetrahydrofuran + hydrogen) binary hydrate phase equilibrium data were determined with this method and compared with the corresponding experimental data reported in the literatures and the acceptable agreements demonstrated the reliability of the experimental method used in this work. The experimental investigation on (tert-butylamine + hydrogen) binary hydrate phase equilibrium was then carried out within the temperature range of (268.4 to 274.7) K and in the pressure range of (9.54 to 29.95) MPa at (0.0556, 0.0886, 0.0975, and 0.13) mole fraction of tert-butylamine. The three-phase equilibrium curve (H + L_w + V) was found to be dependent on the concentration of tert-butylamine solution. Dissociation experimental results showed that tert-butylamine as a hydrate former shifted hydrate stability region to lower pressure and higher temperature.     

Separation of the two enantiomers of naproxcinod by chiral normal-phase liquid chromatography

A normal-phase enantioselective high-performance liquid chromatographic method was developed for the enantiomeric resolution of naproxcinod, the most advanced cyclooxygenase-inhibiting nitric oxide donator of anti-inflammatory drugs designed for treatment of osteoarthritis. The enantiomers of naproxcinod were resolved on a Chiralpak AD-H (250 × 4.6 mm, 5 μm) column using a mobile phase system containing n-hexane and 2-propanol (95:5, v/v). The resolution between the enantiomers was found to be more than 2.0. The limit of detection and limit of quantitation of (R)-enantiomer were found to be 5 and 15 ng/mL, respectively, for 20 μL injection volume. The sample solution and mobile phase were found to be stable for at least 48 h. The final optimized method was successfully applied to separate (R)-enantiomer from naproxcinod and was proven to be reproducible and accurate for the quantitative determination of (R)-enantiomer in bulk drugs.     

Two new compounds from Coriaria nepalensis

Two new compounds,corialins A(1) and B(2) were isolated from Coriaria nepalensis Wall.These new compounds were established as 7-hydroxy-3-[2,3-acetonide-(3-methylbutane)]coumarin(1) and 3-O-β-D-glucopyranosyl-3,4,5-trihydroxy-1-(3- methyl-2-butenyl)-benzene(2),on the basis of 1D and 2D NMR techniques.