Pressure dependence of NMR spectroscopy for studying intermolecular interactions 1H NMR in organic solvents involving the nitroxide radical

Pressure effects on ¹H chemical shifts and relaxation rates in organic solvents containing the nitroxide radical have been observed. ¹H chemical shifts with pressure and pressure-broadenings for hydrogen bonding between proton-donor molecules and the nitroxide radical have been observed.     

Size distribution and characteristics of chemical components in ambient particulate matter.

Ambient particulate matter and gas in Kyoto were investigated by gravimetric analysis, X-ray fluorescence spectrometry, and ion chromatography in order to clarify their behavior and origin. The size distribution and characteristics of the chemical components in ambient particulates collected on PTFE membrane filters using an Andersen air sampler were examined from August 2001 to April 2004. A four-stage filter pack method was used to sample the atmosphere for the determination of gas (SO2, HNO3, HCl, NH3) and particulate matter (SO42, NO3, Cl-, Na+, K+, Ca2+, Mg2+, NH4+) concentrations from October 2002 to April 2004. The concentration of SPM mass was in the range of 6.7 - 80.2 microg/m3. The size distributions of SPM mass were bimodal, peaking at around 0.65 - 1.1 and 3.3 - 4.7 microm, and 40 - 85% of SPM mass was fine particles (< 2.1 microm). Na, Mg, Al, Si, Ca, Cl, and Fe were mainly present in coarse particles (2.1 to 11.0 microm), while S was present in fine particles. The concentrations of Al, Si, Ca, Mg, and Fe in fine particles increased from March to April in 2002, and those in coarse particulates increased in November 2002 and from March to April in 2004. This may be the effect of the continental yellow sand "Kosa." The differences in the size distributions of Al, Si, Ca, Mg, and Fe in particles may depend on differences in their place of occurrence and course of transport from China to Japan. The concentration of HCl gas was higher than that of particulate chloride ion in summer. Nitric acid gas existed at higher concentrations in summer, but fine particulate nitrate ion was observed in winter. The gaseous-to-fine aerosol nitrate fraction became higher at warmer temperatures. Coarse sulfate was below 10%, and SO2 gas and fine particulate sulfate were above 90%.     

Cationic ring-opening transfer polymerization of spiro ortho esters initiated by carbon black

The ring-opening transfer polymerization of spiro ortho esters (SOE) initiated by carbon black was investigated. In the absence of carbon black, no polymerization occurred at all. In the presence of channel black containing carboxyl group, the ring-opening transfer polymerization of SOE was initiated at 50-70°C. to give polyether ester, namely alternating copolymer of epoxide and lactone. The rate of polymerization of 1,4,6-trioxaspiro[4.4]nonane and 1,4,6-trioxaspiro[4.5]decane was considerably small compared with that of 1,4,6-trioxaspiro[4.6]undecane. The activation energy of the polymerization of 2-chloromethyl-1,4,6-trioxaspiro[4.6]undecane was estimated to be 6.0 kcal/mol. The initiating activity of carbon black increased with an increase in carboxyl group content of carbon black. Furnace black that contained no carboxyl group was unable to initiate the polymerization. Furthermore, the carbon black lost the initiating ability of the polymerization upon the blocking of carboxyl group on the surface by the treatment with potassium hydroxide or diazomethane. Based on these results, it was concluded that carboxyl group on carbon black plays an important role in the initiation. During the polymerization, a part of the polymer formed was grafted onto carbon black: the grafting ratio was 10–30%. The mechanisms of initiation and grafting were discussed.     

On-column derivatization-capillary electrochromatography with o-phthalaldehyde/alkylthiol for assay of biogenic amines

The elution behaviors of the biogenic amines, histamine (HA) and its metabolite methyl histamine (MHA), were evaluated by means of on-column derivatization (OCD)-capillary electrochromatography (CEC) which employed a monolithic octadecylsilica (ODS) capillary column (20 cm of effective length x 50 microm of inner diameter). Five kinds of alkylthiols, e.g., 2- hydroxyethylthiol (or 2-mercaptoethanol (2-ME)), ethanethiol (ET), 1-propanethiol (1-PT), 2-methyl-1-propanethiol (2-MPT) and 1-butanethiol (1-BT) were separately presented at 5 mM each in the OCD-CEC separation run buffer consisting of 60% acetonitrile in 5 mM o-phthalaldehyde (OPA)-10 mM borate buffer (pH 10). When 2-ME was present in the run buffer solution, both derivatives corresponding to HA and MHA migrated separately, but closely together through the capillary column. Replacement of 2-ME with 1-BT in the run buffer solution caused a delay in their elution profiles on the electrochromatogram and the separation between those two peaks became remarkably improved. The elution times of HA and MHA followed the increase in alkyl chain length or hydrophobicity of thiol, 1-BT > 2-MPT > 1-PT > ET > 2-ME. Performance of on-line preconcentrations of HA and MHA was also evaluated by varying the electrokinetic injection voltage from 1 kV to 8 kV. The peak area counts corresponding to HA recorded about 50 times higher when 2 kV was applied for 240 s to a 0.1 mM HA solution than when 8 kV was applied for 5 s. This method was next applied to a sample of human urine spiked with HA and MHA at levels of 0.1 microM each. Although HA and MHA peaks were not identifiable among the peaks corresponding to the materials in the urine matrix when OPA/2-ME was employed in a run buffer for the OCD-CEC, the separation and identification of their peaks became possible by replacing 2-ME with 1-BT in the run buffer solution.     

Studies on penem and carbapenem. I. Syntheses and oral absorption of ester-type prodrugs of sodium (5R,6S)-2-(2-fluoroethylthio)-6-[(1R)-1-hydroxyethyl]penem-3-c arboxylat e

Acyloxyalkyl esters (2a-d), alkyloxycarbonyloxyalkyl esters (2e-g) and (5-methyl-2-oxo-1,3-dioxol-4-yl)methyl ester (2h) of (5R,6S)-2-(2-fluoroethylthio)-6-[(1R)-1-hydroxyethyl]penem-3- carboxylic acid (1) were synthesized. Enhanced oral absorption was observed in mice reflecting increased lipophilicity, compared with the parent 1 itself. Among them, the ester 2h showed a prolonged plasma level and a large area under the blood concentration-time curve (AUC) in rats. These ester-type prodrugs of penem 1 in phosphate buffer (pH 6.86) were much more stable than those of cephalosporins which easily degraded via isomerization to delta 2 cephalosporins.     

Design and synthesis of novel type somatostatin analogs with antiproliferative activities on A431 tumor cells

It was reported that the somatostatin analog TT-232, d-Phe-c(Cys-Tyr-d-Trp-Lys-Cys)-Thr-NH₂, exhibited a highly potent antitumor activity in vitro and in vivo. Using pyrazinone analogs and aliphatic amino acids instead of the disulfide bond, we prepared novel type somatostatin analogs including the sequence essential for antitumor activities, Tyr-d-Trp-Lys. These analogs exhibited antiproliferative effect on A431 tumor cells.     

Hydrogen evolution from water by use of viologen polymers as electron transfer catalyst

The behavior of viologen polymer (P-V²⁺) as an electron transfer catalyst in the reaction of hydrogen generation was studied. In the photoirradiation system, which contains triethanolamine (TEA), Ru(bpy)³⁺₃, and P-V²⁺, the amount of hydrogen evolution was less than methyl viologen (MV²⁺); P-V²⁺, however, was more effective in sodium dithionite as the electron donor and showed higher initial rates than MV²⁺.     

Carbon dioxide fixation by microalgae photosynthesis using actual flue gas discharged from a boiler

To mitigate CO₂ discharged from thermal power plants, studies on CO₂ fixation by the photosynthesis of microalgae using actual exhaust gas have been carried out. The results are as follows.

Pre-fibrillation of pulps to manufacture cellulose nanofiber-reinforced high-density polyethylene using the dry pulp direct kneading method

The dry pulp direct kneading method is an industrially viable, low-energy process for manufacturing cellulose nanofiber (CNF)-reinforced polymer composites, where the chemically modified pulps are nanofibrillated and uniformly dispersed in the polymer matrix during melt compounding. In the present study, cellulose fibers of various sizes ranging from surface-fibrillated pulps (20 μm in width) to fine CNFs (20 nm in width) were prepared from softwood bleached kraft pulps using a refiner and a high-pressure homogenizer. These cellulose fibers were modified with alkenyl succinic anhydride and dried. The dried fibers were used as a feed material for melt compounding in the dry pulp direct kneading method to fabricate CNF-reinforced high-density polyethylene (HDPE). When surface-fibrillated pulps were employed as a feed material, the pulps were nanofibrillated and dispersed uniformly in the HDPE matrix during melt compounding. The resulting composites had much better properties—i.e., much higher tensile modulus and strength values, and much lower coefficient of thermal expansion values—than the composites produced using pulps without pre-fibrillation. However, when CNFs were used as a feed material, they were shortened and agglomerated during melt compounding, and the properties of the composites consequently deteriorated. The study concludes that surface-fibrillated pulp, which can be produced cost-effectively using a refiner on an industrial scale, is more suitable as a feed material than CNFs for melt compounding in the dry pulp direct kneading method. This finding enables the elimination of a preliminary step in the preparation of CNFs from pulps, which is a time-consuming and energy-intensive process.

Graphical abstract

     

Kinetic study of the electron-transfer oxidation of the phenolate anion of a vitamin E model by molecular oxygen generating superoxide anion in an aprotic medium

Electron-transfer reduction of molecular oxygen (O2) by the phenolate anion (1-) of a vitamin E model, 2,2,5,7,8-pentamethylchroman-6-ol (1H), occurred to produce superoxide anion, which could be directly detected by a low-temperature EPR measurement. The rate of electron transfer from 1- to O2 was relatively slow, since this process is energetically unfavourable. The one-electron oxidation potential of 1- determined by cyclic voltammetric measurements is sufficiently negative to reduce 2,2-bis(4-tert-octylphenyl)-1-picrylhydrazyl radical (DOPPH*) to the corresponding one-electron reduced anion, DOPPH-, suggesting that 1- can also act as an efficient radical scavenger.