基于Gene Ontology的表达谱与基因功能相似性的相关性研究

聚类是芯片数据分析中被广泛使用的方法。未知基因的功能通常通过其与已知基因在不同生物状态下具有表达相似性来进行预测。然而，还未有人就这种通过表达相似性来进行功能注释的方法的可靠性进行评估。本文利用Gene Ontology对表达相似性和基因功能相似性的相关关系进行了全面的研究。研究表明，尽管表达谱的相似性和基因功能相似性之间有一定的依赖关系，但相关性较弱。在Gene Ontology的三大类中，相对生物过程和分子功能，基因表达谱的相似性更有助于细胞组分的注释。本文的研究结果对于基因功能的预测有一定的指导意义。     

胶束催化作用下实现聚苯乙烯的氯甲基化

用紫外分光光度法测定了离子型表面活性剂胶束溶液对聚苯乙烯四氯化碳溶液的增溶性能; 用胶束催化法实现了聚苯乙烯的氯甲基化, 用红外光谱法和佛尔哈德法表征了氯甲基化聚苯乙烯的化学结构与组成; 通过比较阴、 阳离子表面活性剂及结构不同的阳离子表面活性剂的催化效果, 探索了胶束催化的作用机理, 考察了表面活性剂结构对催化作用的影响规律. 结果表明, 表面活性剂胶束溶液可增溶聚苯乙烯的四氯化碳溶液, 随着四氯化碳在胶束中的增溶, 聚苯乙烯可转移至表面活性剂的胶束中; 胶束催化是实现聚苯乙烯的氯甲基化的有效途经, 仅用3.35 g/L的十六甲基三甲基溴化铵(CTAB),  于65 ℃， 5 h内即可使聚苯乙烯大分子链中的苯环氯甲基化程度达到37%; 聚苯乙烯与甲醛、 氯化氢的反应过程由亲电取代和亲核取代串联而成, 阳离子表面活性剂比阴离子表面活性剂的催化作用更加有效, 说明亲核取代是慢步骤; 阳离子表面活性剂疏水链越长, 对聚苯乙烯的增溶效果越好, 催化作用越强.     

Fabrication of lead titanate single crystalline nanowires by hydrothermal method and their characterization

Single crystalline nanowires of lead titanate (PbTiO₃) were fabricated by hydrothermal method at 200°C using lead acetate and n-tetrabutyl titanate as starting materials, where sodium hydroxide was served as a mineralizer. Crystalline phases, microstructure and optical properties of PbTiO₃ nanowires were investigated. The PbTiO₃ nanowires were uniform and continuous along the long axis, and were composed of single crystalline PbTiO₃ with a tetragonal perovskite structure. The diameter of a single nanowire was around 12 nm and the length reached up to 3 μm. The chemical composition of the samples and the valence states of elements were determined by X-ray photoelectron spectroscopy (XPS). The ultraviolet/visible absorption spectroscopic investigation suggested that the absorption edge of optical transition of the first excitonic state occurred at around 320 nm. A blue-green light emission peaking at about 471 nm (2.63 eV) is observed at room temperature, and the intensity of this emission increased with increasing excitation wavelength. Oxygen vacancies are responsible for the light emission of PbTiO₃ nanowires.     

Chemical Constituents from Cynoglossum gansuense

Two new alkaloids, i.e., (2,3‐dihydro‐1‐oxo‐1H‐pyrrolo[1,2‐a]pyrrol‐7‐yl)methyl (2S*,3S*)‐3‐[(β‐D ‐glucopyranosyl)oxy]‐2‐hydroxy‐2‐(1‐methylethyl)butanoate ( 1 ) and 1,2‐dihydro‐8‐methoxy‐2‐oxoquinoline‐4‐carboxylic acid ( 2 ), were isolated from the alcoholic extract of the whole plant of Cynoglossum gansuense, together with twelve known compounds Their structures were characterized by means of spectroscopic methods, especially by ¹H‐, ¹³C‐, and 2D‐NMR, as well as by HR‐MS experiments and comparison with literature data.     

带甲基侧基的环氧树脂增容剂对炭黑在丁苯橡胶中分散度的影响

用自制的带甲基侧基的环氧树脂(TMBP)作为界面增容剂, 从拉伸性能、键合胶含量、动态性能、扫描电镜和流变性能等方面, 研究了TMBP对炭黑在丁苯橡胶中分散度的影响, 并与市售通用双酚A型环氧树脂(E-51)和橡胶工业常用软化剂邻苯二甲酸二辛酯(DOP)进行了比较. 结果表明, 带甲基侧基的环氧树脂TMBP在提高炭黑分散性方面的效果远比E-51好， 其作用模式具有典型的增容特性.     

Sonogashira反应研究的最新进展

对Sonogashira反应的最新研究进展作了综述. 详细地介绍了Sonogashira 反应的最新优化、联串化、绿色化以及非Pd催化的Sonogashira反应等, 同时还综述了Sonogashira反应的机理研究.     

Synthesis and Crystal Structure of 3-（Trichloroacetyl） Indole

1 INTRODUCTION Indole and its derivatives have attracted much at-tention due to their chemical properties as well asbiological activities[1, . They have been widely used 2]as the materials for producing pigment, perfume,plant growth regulators, etc. Recently, it has alsobeen found that some indole derivatives present anti-tumor and antiviral activities[3～5]. During our sear-ches for bioactive compounds, a series of indole deri-vatives were synthesized, among …     

铁氰化锰修饰玻碳电极的制备及其电化学性能

A thin film of manganese hexacyanoferrate （MnHCF） was electrochemically formed on a glassy carbon （GC） electrode to prepare a chemically modified electrode （CME）. The mechanism of film formation of MnHCF and its growth process were investigated in detail by cyclic voltammetry. The results show that the stoichiometric composition of MnHCF is Mn^ⅢFe^Ⅲ（CN）6, an analogue of prussian yellow. There exist three clear-cut stages in the whole modification process and the last stage is indispensable to the fabrication of homogenized, stable MnHCF film and must last for an appropriate time. The surface morphology of MnHCF/GC electrode was characterized by scanning electron microscopy （SEM）, which further verified the effective deposition of MnHCF film on GC. The kinetic constants of MnHCF/GC electrode process were also evaluated. The resulting MnHCF film modified electrode presented good stability and high electrocatalytic activity toward the oxidation of H2O2, indicating that MnHCF film possesses function of catalase and can be expected for analytical purposes.     

尿素法合成高结晶度类水滑石

尿素的高温分解特性被用于控制层状化合物合成过程中的pH值。室温下尿素可与硝酸盐形成均一溶液，当其高温分解时可以保证溶液内部各点的pH值始终一致，因而可获得高结晶度的水滑石样品。利用该法可合成出Mg-Al、Zn-Al及Ni-Al类水滑石，但难以合成出Co-Al，Mn-Al及Co-Cr类水滑石，相信这与不同金属离子发生沉淀时所需的pH值有关。     

一步室温固相化学反应合成纳米氨基酸杂多电荷转移配合物(HPhe)3PMo12O40·2H2O

以Keggin结构的钼磷酸(H3PMo12O40·13H2O)与苯丙氨酸(Phe)为原料,利用一步固相化学反应于室温合成了纳米氨基酸杂多电荷转移配合物(HPhe)3PMo12O40·2H2O,采用元素分析,IR,XRD,TEM,UV和循环伏安法等手段对其进行了结构表征及性质研究.结果表明,标题化合物纳米粒子为均匀的球状,粒径约为30～40nm.该化合物中杂多阴离子部分仍保持Keggin结构,但在钼磷酸与苯丙氨酸之间发生了显著的电荷转移.