多壁碳纳米管-Nafion复合膜修饰玻碳电极测定硝苯地平的研究

研制了以Nafion分散羧基化多壁碳纳米管的化学修饰电极(Nafion-MWCNTs/GC),研究了硝苯地平(NIF)在修饰电极上的电化学行为和测定方法。实验结果表明,在0.1mol/LNH3-NH4Cl(pH9.6)溶液中,Nafion-MWCNTs/GC,对NIF具有明显的催化和增敏作用,还原峰电位由-0.85V(裸电极)正移到-0.75V(vs.AgCl/Ag)(修饰电极),灵敏度增加约7倍。对各种实验条件进行了优化。定量测定的线性范围为2.5×10-7~4.5×10-5mol/L,r为0.9974;检出限为8.0×10-8mol/L。探讨了NIF在Nafion-MWCNTs/GC上的电极过程和反应机理,测得在本体系中参与反应的质子数和电子转移数均为4,电子转移系数α为0.41。对NIF药片进行了测定,回收率为94.5%~101.0%。     

低碳烃芳构化过程中HZSM－5催化剂结炭规律的研究

用ＧＣ、ＴＰＯ－ＧＣ、ＮＨ＿３－ＴＰＤ和ＴＥＭ等方法，测定了丙烷在ＨＺＳＭ－５沸石上芳构化过程中，催化剂的活性、结炭量、结炭Ｃ／Ｈ比、酸密度等，考察了催化剂的结炭量与其它参数之间的关系。结果表明，在反应温度为８７３Ｋ，进料空速ＷＨＳＶ＝５ｈ￣（－１）时，丙烷在ＨｚＳＭ－５上的结炭首先发生在沸石晶体的外表面的活性中心上（结炭量１．８％之前）；结炭量为１．８～３．４％时，主要在孔道交叉点结炭；结炭量在３．４～５．７％时，孔道已有受限或阻塞现象发生，导致一些富氢的结炭物在孔道内生成。     

A facile approach to surface graft vinyl acetate onto polyolefin articles

A facile and environment friendly approach was developed to graft vinyl acetate (VAc) onto plastic articles in an aqueous solution using tert‐butyl alcohol (TBA) as a compatiblizer and benzoyl peroxide (BPO) as an initiator. In a novel setup, excessive monomer suspended in a water phase, VAc could be conveniently grafted on the model substrate of low‐density polyethylene (LDPE) film and the graft percentage (GP) could be developed up to 7.3%. Reaction temperature could increase GP significantly, while adding monomer over a critical volume did not influence GP. By adding some paradioxybenzene, i.e. 0.06–0.08% in VAc phase, homopolymer PVAc could be avoided practically, while graft polymerization proceeded favorably in aqueous solutions. It was proved by attenuated total reflection‐infrared (ATR‐IR) spectroscopy that grafted VAc was located mainly at the surface of the LDPE film and hydrophilic nature of both grafted and alcoholyzed films were improved via contact angle measurements. Copyright © 2004 John Wiley & Sons, Ltd.     

四足配体铽配合物-蒙脱土超分子复合发光材料的插层组装、表征和性质研究

用两种方法分别将四足配体铽配合物[TbL（NO3）]^2＋和[TbL]^3＋插层组装到了蒙脱土（MT）层板间，制备出超分子复合发光材料[TbL（NO3）^2＋-MT和[TbL]^3＋-MT。方法一：通过离子交换反应让配离子[TbL（NO3）]^2＋取代钠＋基蒙脱土（Na-MT）中的Na^＋离子，插层组装到蒙脱土层板间。方法二：用配体L与铽基蒙脱土（Tb-MT）反应，使配体插入蒙脱土层板间与Tb^3＋离子配位。用元素分析、XRD，FT-IR,UV-vis和热分析对材料进行了表征，并对其荧光性质进行了研究。结果表明，复合材料保持了蒙脱土良好的层柱结构特征，其层间距d001值与插层配离予的直径吻合较好，配离子以单层形式分布于蒙脱土层板间，复合材料中配合物的热稳定性有明显提高。在紫外光激发下，复合材料发出较强的Tb^3＋特征荧光，其发射光谱与相应配合物的发射光谱很相似；复合材料中配合物的相对荧光强度较相应纯配合物有明显提高。荧光寿命较长；配合物的激发波长向可见光区发生位移，说明插层组装实现了对配合物激发波长的调制作用。     

二(1,8萘啶氮氧化物)合硝酸钍(Ⅳ)和铀酰(Ⅱ)配合物的合成及其性质

制得二(1,8-萘啶氮氧化物)合硝酸钍和铀酰配合物,元素分析确定其组成为Th(C_3H_6N_2O)_2(NO_3)_4和UO_2(C_3H_6N_2O)_2(NO_3)_2。通过红外光谱、荧光光谱、摩尔电导、差热热重分析等方法,研究了配合物的性质。     

Fe3O4/TiO2 纳米材料靶上脱盐的基质辅助激光解析/电离质谱新方法研究

建立了一种简便、高效的靶上脱盐新方法。利用Fe3O4/TiO2磁性纳米材料对肽段的吸附作用,将其作为载体用于靶上肽段富集和脱盐。在对纳米材料使用量、浸洗条件进行优化的基础上,成功地鉴定了溶于10mol/L尿素溶液的100fmol的肌红蛋白样品,也对溶于3mol/L尿素溶液中的10fmol的肌红蛋白样品进行了成功地分析鉴定。通过对肌红蛋白样品进行预处理和质谱分析重复实验,表明该方法重现性好,且简便、高效,所需时间短,一次可同时处理多个样品,易于实现通量化,为有效地解决目前蛋白质组分析中所面临的基质辅助激光解析/离子化飞行时间质谱耐盐性差的问题提供了一种新的手段。     

The application of C-N.M.R. spectroscopy to the determination of the stereochemistry of Diels-Alder adducts

Long-range (³J) ¹³C-H coupling is a reliable probe to evaluate the stereochemistry of cycloaddition products. The method is best applied to carbonyl containing adducts but not restricted to them. Several structures have been revised and new ones evaluated.     

Crystal structures of the complexes of rare earth picrates with N, N, N′, N′-tetraphenyl-3, 6-dioxaoctanediamide

The complexes of rare earth picrate with N, N, N′, N′-tetraphenyl-3, 6-dioxaoctanediamide (TDD), [Eu(pic)₃(TDD)]-2CH₃CN and [Y(pic)₃(TDD)], have been synthesized. The crystal structures reveal that TDD acts as a tetradentate ligand, forming a ring-like coordination structure with its oxygen atoms together with one oxygen atom of the bidentate picrate. In the Eu (III) complex, the europium ion with a larger ionic radius lies out of the ring, while in the Y (III) complex, the yttrium ion with a smaller ionic radius enters the cavity of the ligand. The structures of the complexes are greatly affected by the ionic radii due to participation of the picrates in coordination. Project supported by the National Natural Science Foundation of China, the Doctoral Foundation of the State Education Commission of China, and the Climb Plan Foundation of the State Science and Technology Commission of China.