Generalized Minkowski formulas for closed hypersuperfaces in Riemann space

Summary This paper generalizedMinkowski formulas for a closed orientable hypersurface in aRiemann space with constant curvature which have been introduced byC. C. Hsiung, and studies on some properties of the hypersurface whose the v-th mean curvature is constant, on making use of the generalized formulas. To Enrico Bompiani on his scientific Jubilee     

Two-dimensional wave run-up analysis by selective lumping finite element method

A new finite element technique for the analysis of wave run-up is presented in this paper. In this finite element approach, the movement of the shoreline is expressed by that of the nodal points at the wave front, and an auto mesh generation technique is effectively used. The present method is tested by the comparison with the experimental result of a channel with uniform slope, and two numerical examples are reported to show the efficiency of this method. As a final example, the tsunami run-up caused by the 1983 Nihonkai-Chubu earthquake is analysed and compared with actual records of the flooded area.     

Soft-landing isolation of vanadium-benzene sandwich clusters on a room-temperature substrate using n-alkanethiolate self-assembled monolayer matrixes

Gas-phase synthesized vanadium-benzene 1:2 (VBz(2)) sandwich clusters were size-selectively deposited onto bare gold and long-chain n-alkanethiolate [-S-(CH(2))(n-1)-CH(3); n = 16, 18, and 22] self-assembled monolayer (SAM)-coated gold substrates under ultrahigh vacuum (UHV) conditions. Investigation of the resulting deposited clusters was performed by infrared reflection absorption spectroscopy (IRAS) and thermal desorption spectroscopy (TDS). The IR frequencies of the soft-landed VBz(2) clusters show excellent agreement with the fundamentals reported in IR data of VBz(2) in an argon matrix. The analysis of IRAS spectra reveals that while there was no orientational preference of the VBz(2) clusters on a bare gold substrate, the VBz(2) clusters deposited onto the SAM substrates were highly oriented with the molecular axis 70-80 degrees tilted off the surface normal. In addition, analysis of TDS spectra revealed unusually large adsorption heats of the physisorbed VBz(2) clusters. The present results are explained by cluster penetration into the long-chain alkanethiolate SAM and for the first time demonstrate the matrix isolation of gas-phase organometallic clusters around room temperature.     

Atomistic chemical computation of Olefin polymerization reaction catalyzed by (pyridylamido)hafnium(IV) complex: Application of Red Moon simulation

We have realized the microscopic simulation of olefin polymerization, that is, the simulation of the catalytic polymerization (CP) reaction system composed of (pyridylamido)hafnium(IV) complex as the catalyst. For this purpose, we adopted Red Moon (RM) method, a novel molecular simulation method to simulate the complex reaction system. First, according to the previous research, with the help of the QM calculation, we proposed a model system and elementary processes and explained the theoretical treatment of the simulation by the RM method (the RM simulation). In addition, we also proposed a macroscopic simulation based on chemical kinetics simulation. Then, we performed two simulations and compared them in terms of the effective time evolution of the three macroscopic physical quantities, the number-average molecular weight M_n , the mass-average molecular weight M_w , and the molar-mass dispersity Đ_M . The comparison showed that the two simulations are in quantitative or partially qualitative agreement with each other. Therefore, it is concluded that the RM simulation could not only simulate the CP reaction process microscopically, but also it is connected essentially to reproduce the time evolution of the macroscopic physical quantities on the basis of its microscopic simulation data. © 2018 Wiley Periodicals, Inc.     

Microscopic Elucidation of Solid‐Electrolyte Interphase (SEI) Film Formation via Atomistic Reaction Simulations: Importance of Functional Groups of Electrolyte and Intact Additive Molecules

Secondary batteries such as Li‐ion battery are expected to be utilized as not only ubiquitous electric power sources such as mobile phones but also large‐scale electricity storage devices. Therefore, it is urgent to develop the higher performance secondary batteries. Their lifetime and stability are found to be strongly dependent on the nature of passivation film called solid electrolyte interphase (SEI) film formed on the anode surface in the initial charge‐discharge cycle. However, since it is difficult to directly observe the film formation processes in experiment, its microscopic mechanism is still not found. On the other hand, although the theoretical methods are useful complement to the experiment, some new methodologies are necessary to understand the long‐term processes of SEI film, which is produced as a result of that a lot of chemical reactions proceed simultaneously. Under the circumstances, we have developed Red Moon method that can simulate such complex chemical reaction systems, and were able to analyze for the first time the SEI film formation processes on the anode surface at the atomistic level. Then, we clarified theoretically the microscopic mechanism of the additive effect which is essential to improve the Na‐ion battery performance so as to enhance the SEI film formation. This new microscopic insight must provide an important guiding principle for use in designing the most suitable electrolytes for developing high‐performance secondary batteries.     

A CO Adsorption Site Change Induced by Copper Substitution in a Ruthenium Catalyst for Enhanced CO Oxidation Activity

Ru is an important catalyst in many types of reactions. Specifically, Ru is well known as the best monometallic catalyst for oxidation of carbon monoxide (CO) and has been practically used in residential fuel cell systems. However, Ru is a minor metal, and the supply risk often causes violent fluctuations in the price of Ru. Performance‐improved and cost‐reduced solid‐solution alloy nanoparticles of the Cu‐Ru system for CO oxidation are now presented. Over the whole composition range, all of the Cu_xRu_1?x nanoparticles exhibit significantly enhanced CO oxidation activities, even at 70 at % of inexpensive Cu, compared to Ru nanoparticles. Only 5 at % replacement of Ru with Cu provided much better CO oxidation activity, and the maximum activity was achieved by 20 at % replacement of Ru by Cu. The origin of the high catalytic performance was found as CO site change by Cu substitution, which was investigated using in situ Fourier transform infrared spectra and theoretical calculations.     

Certified reference material for the determination of perfluorooctane sulfonate in acrylonitrile-butadiene-styrene resin (NMIJ CRM 8155-a)

A certified reference material (CRM) for the determination of perfluorooctane sulfonate (PFOS) in acrylonitrile-butadiene-styrene (ABS) resin (NMIJ CRM 8155-a) has been issued by the National Metrology Institute of Japan (NMIJ). The bulk material was prepared by mixing commercial ABS resin powder and potassium PFOS and cut into square plates (20 × 20 mm, 2 mm thick) as the CRM. Analytical processes combined with isotope-dilution mass spectrometry and liquid chromatography/mass spectrometry were optimised and applied for characterisation. One of the approaches adopted by NMIJ for certification is that results from two or more primary methods of measurement should be used; thus, two optimised isotope-dilution mass spectrometric methods (Methods 1 and 2 with reprecipitation and with reprecipitation/solid phase extraction, respectively, were validated mutually and employed) were used to determine the certified value. Homogeneity and stability of the square plates were evaluated and their uncertainty contributions (as relative standard uncertainties) were 1.43% for inhomogeneity and 6.96% for approximately two years’ instability. The certified mass fraction of linear PFOS (heptadecafluoro-1-octanesulfonic acid) in the CRM with expanded uncertainty (coverage factor k = 2, approximately 95% confidence interval) was (33.1 ± 5.0) mg kg^?1 as free acid of PFOS.     

Synthesis of a novel water‐soluble NMDA receptor antagonist

A novel water‐soluble N‐methyl‐D‐aspartate (NMDA) receptor antagonist ATGDMAP 1 as synthesized and the effect of 1 on NMDA receptors was studied using voltage‐clamp recordings of recombinant NMDA receptors expressed in Xenopus oocytes. The compound 1 inhibited macroscopic currents in NR1/NR2A, NR1/NR2B, NR1/NR2C and NR1/NR2D receptor subtypes in oocytes voltage‐clamped at ‐70 mV. Mutant NR1/NR2B receptors containing NR1(T648A) or NR1(T648S) had very large holding currents when voltage‐clamped at ‐70 mV compared to that of wild‐type NMDA receptors, because these mutants generate constitutively open channels. ATGDMAP 1 and Mg²⁺, a channel blocker of the NMDA receptor, reduced the large holding currents needed for mutant NMDA receptors. These data indicate that ATGDMAP 1 directly acts on the channel pores of the NMDA receptor.