Heavy Quark Potential and Quarkonium Spectrum in Nonperturbative pNRQCD

The charmonium and bottomonium mass spectra are investigated systematically in potential nonrelativistic QCD with the heavy quark potential computed by lattice QCD simulations nonperturbatively. The potential consists of a static potential and relativistic corrections classified in powers of the inverse of heavy quark mass m, and the effects of the O(1/m) correction, the O(1/m ²) spin–orbit and spin–tensor corrections on the mass spectra are examined systematically. The pattern of the mass spectra is found to be in fairly good agreement with the experimental data, in which the O(1/m) correction gives an important contribution.     

Fundamental imaging properties of transillumination laser computed tomography based on coherent detection imaging method.

The coherent detection imaging (CDI) method uses the optical heterodyne detection technique. CW and single frequency lasers having long coherence lengths are used to exploit the maximum advantages of heterodyne detection, such as high directionality, selectivity and sensitivity. The CDI method based on optical heterodyne detection enables selective filtering of the directional coherence-retaining emergent photons, which leads to image reconstruction from projections, similar to X-ray computed tomography (CT). So far we have demonstrated the advantages and capabilities of the measurement technique for transillumination optical computed tomography in biomedicine. Here, we investigate the fundamental imaging properties of CDI method, such as its high directionality and quantitativeness, with preliminary physical phantom experiments. The results show that the CDI method satisfies the requirements for CT reconstruction under the first order approximation, and enables quantitative measurements in the sense that the relationship between estimated and actual concentration retains a satisfactory linearity.     

Effects of Pluronics surfactants on morphology and porosity of hematite particles produced from forced hydrolysis reaction

The shape and porosity of hematite particles, produced from a forced hydrolysis reaction of acidic FeCl₃ solution, were controlled by using Pluronics as nonionic surfactants (0–4 wt.%). Pluronics possess a nominal formula of (PEO) _x –(PPO) _y –(PEO) _x . The effect of Pluronics with low hydrophilicity (PEO contents were less than 50 mol%) was small and provided spherical particles the same as that of the system without Pluronics (control system). However, Pluronics with higher hydrophilicity (PEO contents were over 50 mol%) gave ellipsoidal hematite particles. This effect on the particle morphology was enhanced by an increase in their molecular weight. On the other hand, the Pluronics possessing an opposite nominal formula [(PPO) _x –(PEO) _y –(PPO) _x ] exhibited no effect on the particle shape; it only depressed phase transformation from ?-FeOOH to hematite. Not only the morphology but also the pore size of hematite particles was controlled from nonporous to mesoporous by using Pluronics. The N₂ adsorption experiment and t-plot curve analysis revealed that the hematite particles changed from mesoporous to microporous by an increase in the concentration of Pluronics. On the other hand, in the presence of very low amounts of Pluronics molecules (0.1 wt.%), nonporous hematite particles were produced via strong aggregation of PN particles by their hydrogen bonding between hydroxyl and PEO or PPO groups. The dynamic light scattering measurement for the system with Pluronics clarified the existence of polynuclear (PN) particles with a hydrodynamic particle diameter (D _a) of ca. 40 nm after these were aged for 6 h. The size of PN particles remained constant at ca. 40 nm during aging time of 12 h～3 days, but the scattering intensity was decreased. This decrease in the scattering intensity reveals that the number of PN particles is reduced by aggregation. The transmission electron microscope, inductively coupled plasma atomic emission spectroscopy, and total organic carbon analysis measurements employed on the systems produced for ellipsoidal particles elucidated that the formation of ellipsoidal hematite particles is attributed to the adsorption of Pluronics on the surfaces of PN and growing hematite particles.     

Preparation of a cycloheptane ring from a 1,2-diketone with high stereoselectivity

Treatment of 1,6-dialkylhexa-1,5-diene-3,4-diones with bis(iodozincio)methane gave zinc alkoxides of cis-5,6-dialkylcyclohepta-3,7-diene-1,3-diol in good yields at room temperature. The reaction proceeded with high stereospecificity. Bis(iodozincio)methane converted the diketone into the cis-divinylcyclopropane-1,2-diol stereoselectively; this diol transformed into the corresponding cycloheptane derivative stereospecifically via Cope rearrangement.     

Hydrofluoroarylation of alkynes with fluoroarenes

A combination of Ni(cod)(2) and PCyp(3) is found to be an effective catalyst for chemoselective activation of the C-H bond of fluoroarenes over C-F bonds followed by insertion of alkynes to allow direct alkenylation of the electron-deficient arenes. The characteristics of the reactions are: a C-H bond ortho to a fluorine substituent is selectively activated; the reactivity of fluorobenzenes is roughly proportional to the number of fluorine atoms. The reaction conditions tolerate a broad range of both alkynes and fluoroarenes containing both electron-withdrawing and -donating groups, thus allowing efficient synthesis of a variety of substituted ethenes containing a fluoroaryl motif in high regio- and stereoselective manners. Mechanistic studies including both labeling experiments and stoichiometric reactions reveal that oxidative addition of C-H bonds in fluoroarenes to nickel(0) is kinetically highly facile whereas that of C-F bonds is thermodynamically favoured.     

Optimization of simulated moving bed chromatography with fractionation and feedback: Part II. Fractionation of both outlets

A new improvement based on outlet fractionation and feedback has been developed for simulated moving bed (SMB) chromatography. In this contribution, this fractionation and feedback SMB (FF-SMB) concept is extended to the general scenario which integrates a simultaneous fractionation of both outlet streams. A model-based optimization approach, previously adopted to investigate single fractionation, is extended to consider this flexible fractionation policy. Quantitative optimization studies based on a specific separation problem reveal that the double fractionation is the most efficient operating scheme in terms of maximum feed throughput, while the two existing single fractionation modes discussed in our previous study are also significantly superior to the conventional SMB operation. The advantages of the double fractionation extension are further demonstrated in terms of several more detailed performance criteria. In order to evaluate the applicability of the fractionation and feedback modification, the effect of product purity, adsorption selectivity, column efficiency and column number on the relative potential of FF-SMB over SMB is examined.     

Experimental investigation on reversal of secondary Bjerknes force between two bubbles in ultrasonic standing wave

The direction of the secondary Bjerknes force between a free bubble and an attached bubble was experimentally investigated. The behavior of the two bubbles in an ultrasonic standing wave of 27 kHz was observed using an imaging system with a high-speed video camera. It was demonstrated experimentally that the direction of the force reversed at a specific separation distance between the two bubbles, which was defined as the threshold distance. The threshold distance changed with the radius of the attached bubble. In addition, a theoretical calculation was performed using a previously derived model that coupled the vibrations of two free bubbles [Ida, Phys. Lett. A 297, 210-217 (2002)]. The experiment data for the threshold distance qualitatively agreed with the theoretical predictions, except when the separation distance was very small. Then, it was discovered that the free bubble became trapped near the attached bubble when the separation distance between the two bubbles was very small. This indicated that a stable equilibrium point for the separation distance exists that cannot be predicted by the theoretical model.     

Evolution of the Kondo effect in a quantum dot probed by shot noise

We measure the current and shot noise in a quantum dot in the Kondo regime to address the nonequilibrium properties of the Kondo effect. By systematically tuning the temperature and gate voltages to define the level positions in the quantum dot, we observe an enhancement of the shot noise as temperature decreases below the Kondo temperature, which indicates that the two-particle scattering process grows as the Kondo state evolves. Below the Kondo temperature, the Fano factor defined at finite temperature is found to exceed the expected value of unity from the noninteracting model, reaching 1.8±0.2.     

基于MPS方法的汽泡凝结数值模拟研究

采用移动粒子半隐式(MPS)方法对静止过冷水中单个汽泡的凝结现象进行了数值模拟,研究了不同初始压力和初始直径时饱和蒸汽汽泡凝结过程,获得了凝结过程中汽泡形状、当量直径和压力的变化规律;汽泡初始压力为0.1～0.5MPa,初始直径为2mm、3mm和5mm;过冷水压力为0.1MPa,温度为70℃。结果表明两相界面不存在压差时,凝结过程中汽泡始终保持球形,汽泡当量直径逐渐减小,压力近似不变;相界面存在压差时,凝结过程中汽泡从球形逐渐变为心形、半月形,汽泡当量直径和压力会出现周期性振荡,且初始压力越大振荡幅度越大。     

Precise synthesis of a series of poly(4‐n‐alkylstyrene)s and their glass transition temperatures

Poly(4‐n‐alkylstyrene)s with six kinds of n‐alkyl groups such as methyl, ethyl, propyl, butyl, hexyl, and octyl groups covering wide molecular weight range from around 5 k to over 100 k were precisely synthesized by living anionic polymerizations. It was confirmed that all the polymers obtained have narrow molecular weight distribution, that is, M_w/M_n is all less than 1.1, by SEC. T_gs of all the polymers were estimated by DSC measurements and it turned out to be clear that their molecular weight dependence was well described by the Fox–Flory equations. Furthermore, it is evident that T_g monotonically decreases as a number of carbon atoms of n‐alkyl group is increased, though T_g values are all 20 K or more higher than those reported previously for the same polymer series. This is because backbone mobility increases by introducing longer n‐alkyl side groups with high mobility, while T_g difference in between this work and the previous one may due to the experimental conditions and also to the molecular weight range adopted. © 2017 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2017 , 55, 757–763