Optimization of microwave‐assisted extraction for anthocyanins,polyphenols, and antioxidants from raspberry (Rubus Coreanus Miq.) using response surface methodology

Anthocyanins (Acys), polyphenols, and antioxidants were extracted from raspberry (Rubus Coreanus Miq.) using a highly efficient microwave‐assisted extraction technique. Different solvents, including methanol, ethanol, and acetone, were tested. The colors of the extracts varied from light yellow to purple red or dark red. SEM and other nutrient analyses verified that ethanol was the most favorable medium for the microwave‐assisted extraction of raspberry due to its high output and low toxicity. Effects of process parameters, including microwave power, irradiation time, and solvent concentration, were investigated through response surface methodology. Canonical analysis estimated that the highest total Acys content, total polyphenols content, and antioxidant activity of raspberry were 17.93 mg cyanidin‐3‐O‐glucoside equivalents per gram dry weight, 38.57 mg gallic acid equivalents per gram dry weight, and 81.24%, respectively. The polyphenol compositions of raspberry extract were identified by HPLC with diode array detection, and nine kinds of polyphenols were identified and quantified, revealing that chlorogenic acid, syringic acid, and rutin are the major polyphenols contained in raspberry fruits. Compared with other fruits and vegetables, raspberry contains higher Acy and polyphenol contents with stronger antioxidant activity, suggesting that raspberry fruits are a good source of natural food colorants and antioxidants.     

Evaluation of the combinative application of SDS and sodium deoxycholate to the LC–MS‐based shotgun analysis of membrane proteomes

SDS and sodium deoxycholate (SDC) as two representative detergents have been widely used in LC–MS/MS‐based shotgun analysis of membrane proteomes. However, some inherent disadvantages limit their applications such as interference with MS analysis or their weak ability to disrupt membranes. To address this, the combinative application of SDS and SDC was developed and evaluated in our study, which comprehensively used the strong ability of SDS to lyse membranes and solubilize hydrophobic membrane proteins, and the high efficiencies of an optimized acetone precipitation method and SDC in sample clean‐up, protein recovery, and redissolution and digestion of precipitated proteins. The comparative study using a rat‐liver‐membrane‐enriched sample showed that, compared with other three commonly used methods including the filter‐aided sample preparation strategy, the combinative method not only increased the identified number of total proteins, membrane proteins, and integral membrane proteins by an average of 19.8, 23.9, and 24.8%, respectively, but also led to the identification of the highest number of matching peptides. All these results demonstrate that the method yielded better recovery and reliability in the identification of the proteins especially highly hydrophobic integral membrane proteins than the other three methods, and thereby has more potential in shotgun membrane proteomics.     

HPLC-DAD data coupled with second-order calibration method applied to food analysis: Simultaneous determination of six benzoylurea insecticides in various fruit samples by selecting time region of chromatogram

This work presents a novel application of second-order calibration based on self-weighted alternating trilinear decomposition(SWATLD)algorithm for analyzing the HPLC-DAD data.The proposed method makes it possible to simultaneously determine teflubenzuron,hexaflumuron,flufenoxuron,chlorfluazuron,diflubenzuron and benzoylurea in different fruit samples,i.e.pear,apple and banana,in the selected time region of chromatogram.The concentration,elution time and spectral information of these benzoylurea insecticides are selectively extracted from complex matrices even in the presence of unknown interferences.The root-mean-square error of prediction(RMSEP)and figures of merit,including sensitivity(SEN),selectivity(SEL)and limit of detection(LOD)are employed to access the performance of the method.The LODs obtained for these insecticides are within the range 0.017–0.26 ppm in pears,0.039–0.33 ppm in apples,0.041–0.44 ppm in bananas,respectively.Such a chemometrics-based protocol holds great potential to be extended as a promising alternative for more practical applications in food safety and quality monitoring.     

聚合物光伏材料与器件研究进展

高效率的聚合物太阳电池依赖于光吸收活性层材料对太阳光能量的充分利用．电极界面材料将光吸收活性层产生的空穴和电子分别快速高效地抽取到阳极和阴极,并通过进一步改进光伏器件的结构提升能量转换效率和稳定性．本课题组在光吸收活性层中新型聚合物给体材料、新型电极界面材料、利用水／醇性电极界面材料制作新型倒装器件结构的太阳电池方面取得重要进展,推动了太阳电池在能量转换效率和稳定性方面的突破．     

Electroluminescence performances of 1,1-bis(4-(N,N-dimethylamino)phenyl)-2,3,4,5-tetraphenylsilole based polymers in three cathode architectures

A new silole monomer with two 4-(N,N-dimethylamino)phenyl substitutions on silicon atom as designed and synthesized.Three copolymers PF-N-HPS1,PF-N-HPS10 and PF-N-HPS20 were then obtained by copolymerizations of 2,7-fluorene derivatives with the silole monomer at feed ratios of 1%,10%,and 20%.Their UV-vis absorption,electrochemical,photoluminescent,and electroluminescent (EL) properties were investigated.PF-N-HPS possessed HOMO levels of 5.25-5.58 eV,and showed green emissions.Using PF-N-HPS as the emissive layer,three different polymer light-emitting diodes were fabricated as device A with ITO/PEDOT/PF-N-HPS/Al,device B with ITO/PEDOT/PF-N-HPS/Ba/Al,and device C with ITO/PEDOT/PF-N-HPS/TPBI/Ba/Al.For the device A,PF-N-HPS only showed very low EL efficiency of 0.06-0.33 cd/A,indicating that the Al cathode could not inject electron efficiently to the emissive polymers containing the 4-(N,N-dimethylamino)phenyl groups.For the device B,low work function Ba supplied better electron injections,and the EL efficiency could be improved to 0.85-1.44 cd/A.TPBI with a deep HOMO level of 6.2 eV could enhance electron transport and hole blocking.Thus modified recombinations and largely elevated EL efficiency of 4.56-7.96 cd/A were achieved for the device C.The separation of the emissive layer and metal cathode with the TPBI layer may also suppress exciton quenching at the cathode interface.     

Stacking‐Induced Diamagnetic/Paramagnetic Conversion of Imidazo[1,2‐a]pyridin‐2(3 H)‐one Derivatives: Near‐Infrared Absorption and Magnetic Properties in the Solid State

Herein, we present three imidazo[1,2‐a]pyridin‐2(3 H)‐one derivatives that are diamagnetic in solution, but paramagnetic in the solid state, possibly owing to a stacking‐induced formation of phenoxide‐type radicals. Notably, a larger bathochromic shift of the absorption (even up to the near‐ infrared region) of these three compounds was observed in the solid state than in solution, which was attributable to the ordered columnar stacking arrangements or their single‐electron character as radicals in the solid state. Interestingly, compared to that in solution, (E)‐3‐(pyridin‐4′‐ylmethylene)imidazo[1,2‐a]pyridine 2(3 H)‐one displayed a largely red‐shifted emission (centered at 660 nm, with tailing above 800 nm) in the solid state. A larger bathochromic shift (260 nm) of the emission is an indication of better order and tight stacking in the solid state, which is brought about by the rigid and polar acceptor. These three compounds also reveal different magnetic susceptibilities at 300 K, thus implying that they possess various columnar stacking structures. Most interestingly, these three radicals exhibit unusual ferromagnetic‐to‐antiferromagnetic phase transitions, which can be attributed to anisotropic contraction and non‐uniform slippage of the columnar stacking chains.     

Ultrasensitive electrochemical immunosensor for zeranol detection based on signal amplification strategy of nanoporous gold films and nano-montmorillonite as labels

Nano-montmorillonites belong to aluminosilicate clay minerals with innocuity, high specific surface area, ion exchange, and favorable adsorption property. Due to the excellent properties, montmorillonites can be used as labels for the electrochemical immunosensors. In this study, nano-montmorillonites were converted to sodium montmorillonites (Na-Mont) and further utilized for the immobilization of thionine (TH), horseradish peroxidase (HRP) and the secondary anti-zeranol antibody (Ab₂). The modified particles, Na-Mont-TH-HRP-Ab₂ were used as labels for immunosensors to detect zeranol. This protocol was used to prepare the immunosensor with the primary antibody (Ab₁) immobilized onto the nanoporous gold films (NPG) modified glassy carbon electrode (GCE) surface. Within zeranol concentration range (0.01–12 ng mL⁻¹), a linear calibration plot (Y = 0.4326 + 8.713 X, r = 0.9996) was obtained with a detection limit of 3 pg mL⁻¹ under optimal conditions. The proposed immunosensor showed good reproducibility, selectivity, and stability. This new type of immunosensors with montmorillonites and NPG as labels may provide potential applications for the detection of zeranol.     

Morphology-controlled electrochemical sensing amaranth at nanomolar levels using alumina

Different-shaped aluminas were readily prepared via hydrothermal reaction. It was found that the morphology and the electrochemical sensing properties of alumina were heavily dependent on the reaction time. When extending the reaction time from 6 h to 24 h, the obtained alumina samples changed from amorphous bumps to regular microfibers in diameter of 200 nm, as confirmed by scanning electron microscopy. Transmission electron microscopy observation revealed that longer reaction time was beneficial for the formation of porous and uniform fiber-like structures. Electrochemical tests proved that alumina microfibers were more active for the oxidation of amaranth and exhibited much higher enhancement effect, compared with alumina bumps. On the surface of alumina microfibers, the oxidation peak currents of amaranth increased remarkably. The influences of pH value, amount of alumina microfibers, and accumulation time on the signal enhancement of amaranth were discussed. As a result, a novel electrochemical method was developed for the detection of amaranth. The linear range was from 1 to 150 nM, and the detection limit was 0.75 nM after 1-min accumulation. The analytical application in drink samples was investigated, and the results consisted with the values that obtained by high-performance liquid chromatography.     

Construction of microscale structures in enclosed microfluidic networks by using a magnetic beads based method

A large number of microscale structures have been used to elaborate flowing control or complex biological and chemical reaction on microfluidic chips. However, it is still inconvenient to fabricate microstructures with different heights (or depths) on the same substrate. These kinds of microstructures can be fabricated by using the photolithography and wet-etching method step by step, but involves time-consuming design and fabrication process, as well as complicated alignment of different masters. In addition, few existing methods can be used to perform fabrication within enclosed microfluidic networks. It is also difficult to change or remove existing microstructures within these networks. In this study, a magnetic-beads-based approach is presented to build microstructures in enclosed microfluidic networks. Electromagnetic field generated by microfabricated conducting wires (coils) is used to manipulate and trap magnetic beads on the bottom surface of a microchannel. These trapped beads are accumulated to form a microscale pile with desired shape, which can adjust liquid flow, dock cells, modify surface, and do some other things as those fabricated microstructures. Once the electromagnetic field is changed, trapped beads may form new shapes or be removed by a liquid flow. Besides being used in microfabrication, this magnetic-beads-based method can be used for novel microfluidic manipulation. It has been validated by forming microscale dam structure for cell docking and modified surface for cell patterning, as well as guiding the growth of neurons.     

A simple microextraction and preconcentration approach based on a mixed matrix membrane

A simple adsorption/desorption procedure using a mixed matrix membrane (MMM) as extraction medium is demonstrated as a new miniaturized sample pretreatment and preconcentration technique. Reversed-phase particles namely polymeric bonded octadecyl (C₁₈) was incorporated through dispersion in a cellulose triacetate (CTA) polymer matrix to form a C₁₈-MMM. Non-steroidal anti-inflammatory drugs (NSAIDs) namely diclofenac, mefenamic acid and ibuprofen present in the environmental water samples were selected as targeted model analytes. The extraction setup is simple by dipping a small piece of C₁₈-MMM (7 mm × 7 mm) in a stirred 10 mL sample solution for analyte adsorption process. The entrapped analyte within the membrane was then desorbed into 100 μL of methanol by ultrasonication prior to high performance liquid chromatography (HPLC) analysis. Each membrane was discarded after single use to avoid any analyte carry-over effect. Several important parameters, such as effect of sample pH, salting-out effect, sample volume, extraction time, desorption solvent and desorption time were comprehensively optimized. The C₁₈-MMM demonstrated high affinity for NSAIDs spiked in tap and river water with relative recoveries ranging from 92 to 100% and good reproducibility with relative standard deviations between 1.1 and 5.5% (n = 9). The overall results obtained were found comparable against conventional solid phase extraction (SPE) using cartridge packed with identical C₁₈ adsorbent.