Self-assembly of amino-functionalized monolayers on silicon surfaces and preparation of superhydrophobic surfaces based on alkanoic acid dual layers and surface roughening

Reproducibly smooth amino-functionalized surfaces were obtained by deposition of aminopropyltrimethoxysilane (APTMS) at the vapor/solid interface. Characteristics of these amino-functionalized surfaces were evaluated based on atomic force microscopy, water contact angle measurement and X-ray photoelectron spectroscopy. The results showed that APTMS modified surfaces are very homogeneous and the chemical reactivity of modified surfaces can be ensured with high free amino content. Furthermore, for the purpose of tailoring the wettability of silicon surface, dual self-assembled films were achieved by performing reaction between amino-functionalized surface and n-alkanoic acids with different chain length. The wettability of the self-assembled films can be adjusted with altering the hydrocarbon chain length of alkanoic acids. Moreover, cooperation of dual self-assembled films with surface roughening, superhydrophobic surfaces with CA larger than 153 degrees were obtained. Thus, the wettability of modified surfaces can be altered greatly with changing hydrocarbon chain length of self-assembled films.     

Adsorption of hexyl-alpha,omega-bis(dodecyldimethylammonium bromide) gemini surfactant on silica and its effect on wettability

The adsorption of hexyl-alpha,omega-bis(dodecyldimethylammonium bromide) (C(12)C(6)C(12)Br(2)) gemini surfactant on silica and its effect on wettability have been studied. The structure of the adsorbed aggregates experiences an evolving course with the increase of C(12)C(6)C(12)Br(2) concentration. It is from no aggregates to circular islands, then to semicontinuous islands, and at last to the two-bilayer structure. No matter what kind of aggregates are in existence, their thickness values are to be the same 3.3+/-0.3 nm. The fraction of silica surface covered by the surfactant aggregates also varies from nearly zero at 0.05 mM to approximately 0.92 at 5.0 mM. The variation of contact angle against C(12)C(6)C(12)Br(2) concentration shows two distinct regions. The upward shift indicates that the surfactant molecules are adsorbed with their hydrophobic tails facing air upon increasing concentration, while the downward shift reveals that the surfactant aggregates are in existence with the hydrophilic headgroups facing air. IR spectra suggest that two different courses are involved with the increase of the surfactant concentration. One possible course is that the surfactant tails pack more closely and orderly, and the other may be that the spacer changes from stretched profile to bended conformation upon increasing the surfactant concentration.     

Aggregation behavior in mixed system of double-chained anionic surfactant with single-chained nonionic surfactant in aqueous solution

The aggregation behavior of mixed systems of sodium bis(2-ethylhexyl) sulfosuccinate (AOT) or sodium bis(4-phenylbutyl) sulfosuccinate (SBPBS) with nonionic surfactant pentaethylene glycol mono-n-dodecyl ether (C12E5) have been studied by means of steady-state fluorescence, electrical conductivity, dynamic light scattering, transmission electron microscopy, electrophoretic light scattering and pyrene solubilization measurements. The critical concentrations for aggregation, micropolarity, mobility, solubilization capacity and morphology of aggregates are characterized. Two critical concentrations for aggregation are observed in the mixed surfactants, which may correspond to the formation of different kinds of aggregates. Moreover, it is more favorable for AOT-C12E5 to form mixed vesicles compared to SBPBS-C12E5 at higher mole fraction of C12E5. In addition, it is revealed that SBPBS-C12E5 mixture has larger solubilization capacity for pyrene than AOT-C12E5 system.     

A Water‐Soluble Conjugated Polymer for Protein Identification and Denaturation Detection

Rapid and sensitive methods to detect proteins and protein denaturation have become increasingly needful in the field of proteomics, medical diagnostics, and biology. In this paper, we have reported the synthesis of a new cationic water‐soluble conjugated polymer that contains fluorene and diene moieties in the backbone ( PFDE ) for protein identification by sensing an array of PFDE solutions in different ionic strengths using the linear discriminant analysis technique (LDA). The PFDE can form complexes with proteins by electrostatic and/or hydrophobic interactions and exhibits different fluorescence response. Three main factors contribute to the fluorescence response of PFDE , namely, the net charge density on the protein surface, the hydrophobic nature of the protein, and the metalloprotein characteristics. The denaturation of proteins can also be detected using PFDE as a fluorescent probe. The interactions between PFDE and proteins were also studied by dynamic light scattering (DLS) and isothermal titration microcalorimetry (ITC) techniques. In contrast to other methods based on conjugated polymers, the synthesis of a series of quencher or dye‐labeled acceptors or protein substrates has been avoided in our method, which significantly reduces the cost and the synthetic complexity. Our method provides promising applications on protein identification and denaturation detection in a simple, fast, and label‐free manner based on non‐specific interaction‐induced perturbation of PFDE fluorescence response.     

The surface chemistry of propylene, 1-iodopropane, and 1,3-diiodopropane on MoAl alloy thin films formed on dehydroxylated alumina

The adsorption of C3 hydrocarbons propylene, 1-iodopropane, and 1,3-diiodopropane is studied in ultrahigh vacuum on a molybdenum-aluminum alloy formed by molybdenum hexacarbonyl reaction with a planar alumina film grown on a Mo(100) substrate. Carbon-iodine bond scission occurs below approximately 200 K to deposit iodine, and form propyl species from 1-iodopropane and a C3 metallacycle from 1,3-diiodopropane. Propyl species either undergo beta-hydride elimination to yield propylene or hydrogenate to form propane. Propylene adsorbs as both pi- and di-sigma-bonded species, and the di-sigma form hydrogenates to yield propane, where the addition of the first hydrogen to form propyl species is slower than the second hydrogenation step to yield propane. Propylene also thermally decomposes on the surface to desorb hydrogen and deposit carbon where the methylyne group is the most, and the methyl group the least reactive. The metallacyclic intermediate reacts to give an allylic intermediate, which forms propylene, but also decomposes by C-C bond cleavage to evolve ethylene and deposit methylene species on the surface. This is a key step in the mechanism proposed for heterogeneously catalyzed olefin metathesis and this is the first time that this chemistry has been directly identified in ultrahigh vacuum.     

Comparative studies on interactions of bovine serum albumin with cationic gemini and single-chain surfactants

The interactions of bovine serum albumin (BSA) with cationic gemini surfactants alkanediyl-alpha,omega-bis(dodecyldimethylammonium bromide) [C12H25(CH3)2N(CH2)(S)N(CH3)2C12H25]Br2 (designated as C12C(S)C12Br2, S = 3, 6, and 12) and single-chain surfactant dodecyltrimethylammonium bromide (DTAB) have been studied with isothermal titration microcalorimetry, turbidity, fluorescence spectroscopy, and circular dichroism at pH 7.0. Comparing with DTAB, C12C(S)C12Br2 have much stronger binding ability with BSA to induce the denaturation of BSA at very low molar ratio of C12C(S)C12Br2/BSA, and C12C(S)C12Br2 have a much stronger tendency to form insoluble complexes with BSA. The binding of C12C(S)C12Br2 to BSA generates larger endothermic peaks. The first endothermic peak is much stronger than that of the second endothermic peak. The double charges and strong hydrophobicity of the gemini surfactants are the main reasons for these observations. In addition, the spectra results show that the binding of DTAB to BSA only promotes BSA unfolding and aggregation, whereas the secondary structure of BSA is possibly stabilized by a small amount of C12C(S)C12Br2 , even if the small amount of binding C12C(S)C12Br2 could induce the loss of the tertiary structure of BSA. This result may be related to the double tails of gemini surfactants, which may generate the hydrophobic linkages between the nonpolar residues of BSA.     

Properties of mixed micelles of cationic gemini surfactants and nonionic surfactant triton X-100: effects of the surfactant composition and the spacer length

The mixed micelles of cationic gemini surfactants C12C(S)C12Br2 (S=3, 6, and 12) with the nonionic surfactant Triton X-100 (TX100) have been studied by steady-state fluorescence, time-resolved fluorescence quenching, electrophoretic light scattering, and electron spin resonance. Both the surfactant composition and the spacer length are found to influence the properties of mixed micelles markedly. The total aggregation number of alkyl chains per micelle (N(T)) goes through a minimum at X(TX100)=0.8. Meanwhile, the micropolarity of the mixed micelles decreases with increasing X(TX100), while the microviscosity increases. The presence of minimum in N(T) is explained in terms of the competition of the reduction of electrostatic repulsion between headgroups of cationic gemini surfactant with the enhancement of steric repulsion between hydrophilic headgroups of TX100 caused by the addition of TX100. The variations of micropolarity and microviscosity indicate that the incorporation of TX100 to the gemini surfactants leads to a more compact and hydrophobic micellar structure. Moreover, for the C12C3C12Br2/TX100 mixed micelle containing C12C3C12Br2 with a shorter spacer, the more pronounced decrease of N(T) at X(TX100) lower than 0.8 may be attributed to the larger steric repulsion between headgroups of TX100. Meanwhile, the increase of microviscosity and the decrease of micropolarity are more marked for the C12C12C12Br2/TX100 mixed micelle, owing to the looped conformation of the longer spacer of C12C12C12Br2.     

Comparative studies on the micellization of sodium bis(4-phenylbutyl) sulfosuccinate and sodium bis(2-ethylhexyl) sulfosuccinate and their interaction with hydrophobically modified poly(acrylamide)

The micellization process of sodium bis(4-phenylbutyl) sulfosuccinate (SBPBS) has been studied compared to that of sodium bis(2-ethylhexyl) sulfosuccinate (AOT) by surface tension, steady-state fluorescence, microcalorimetry, dynamic light scattering (DLS), and transmission electron microscopy (TEM) measurements. Meanwhile, the interaction of these two surfactants with hydrophobically modified poly(acrylamide) (HMPAM) was investigated. The results show that the surface tension at the critical micelle concentration (cmc) of SBPBS and the micropolarity probed by pyrene in SBPBS aggregates are both larger than those of AOT. The enthalpy change of micellization (DeltaH(mic)) of AOT is endothermic, while it is exothermic for SBPBS. Strong pi-pi interaction among the adjacent phenyl groups of SBPBS molecules is likely the cause for the above properties of SBPBS. Moreover, vesicles are observed for AOT and SBPBS by DLS and TEM, especially for AOT, whose micelle-vesicle transition has been first confirmed by its calorimetric curve. In the surfactant-HMPAM systems, the critical aggregation concentration (cac), the saturation concentration of aggregation (C(2)), and the thermodynamic parameters of binding have also been determined. The conclusion may be drawn that the binding strength of SBPBS onto HMPAM is stronger than that of AOT.     

Microcalorimetric study on the interaction of dissymmetric gemini surfactants with DNA

The interaction of a series of dissymmetric gemini surfactants, [C(m)H(2m+1)(CH(3))(2)N(CH(2))(6)N(CH(3))(2)C(n)H(2n+1)]Br(2) (designated as C(m)C(6)C(n)Br(2), with constant m+n=24, and m=12, 14, 16, and 18) with DNA in 10 mM NaCl solution has been investigated by isothermal titration microcalorimetry (ITC). The curves for titration of the surfactants into DNA solution show noticeable differences from those into 10 mM NaCl solution without DNA. It is attributed to the interaction between DNA and surfactants. The critical aggregation concentration (CAC), the saturation concentration (C(2)), and the thermodynamic parameters for the aggregation and interaction processes were obtained from the calorimetric titration curves. The results show that the dissymmetry degree (m/n) has a marked effect on the interaction of the C(m)C(6)C(n)Br(2) surfactants with DNA. The CAC and C(2) tend to become smaller with increased m/n. The enthalpy change (DeltaH(agg)) and the Gibbs free energy change (DeltaG(agg)) for aggregation become more negative down the series, indicating that the hydrophobic interaction between the hydrophobic chains of the surfactant molecules increases and the aggregation process is more spontaneous with increased m/n. The entropy changes of aggregation (DeltaS(agg)) are all positive and TDeltaS(agg) is much larger than |DeltaH(agg)|, revealing that the aggregation process is mainly entropy-driven. However, the calculated Gibbs free energy (DeltaG(DS)) for the interaction between the gemini surfactants and DNA becomes less negative with increased m/n, which reveals that the interaction between the gemini surfactants and DNA tends to be weaker with increased m/n. This is induced by the disruption of the chain-chain hydrophobic interaction between the surfactant molecules at higher m/n, where the entropy change DeltaS(DS) for the interaction process tends to be an unfavorable factor. In addition, the DNA concentration also has a remarkable influence on the interaction.     

具有荧光和抗菌双重功能的苦味酸吡啶季铵盐的制备综合实验

介绍了一项涉及苦味酸吡啶季铵盐制备与性能研究的综合性实验.以吡啶、苦味酸、4-溴苄基溴和碳酸钾等为原料,合成了苦味酸-4-溴苄基吡啶季铵盐([4BrBzPy][PIC]),利用红外光谱、紫外-可见光谱、电喷雾质谱、粉末X-射线衍射和单晶X-射线衍射技术进行了表征,并对其固态荧光和抗菌性能进行研究.该实验项目来源于科研,...