Highly sensitive chiral analysis of amino acids by in-line single drop microextraction and capillary electrophoresis with laser-induced fluorescence detection

A highly sensitive method for chiral analysis of amino acids by in-line single drop microextraction (SDME) and chiral capillary electrophoresis (CE) with laser-induced fluorescence (LIF) detection was developed. In SDME, a drop of a basic aqueous acceptor phase covered with a thin organic layer was formed at the tip of a capillary by simple combination of sample-handling sequences of a CE apparatus. Then fluorescein isothiocyanate (FITC)-derivatized amino acids in an acidic donor solution were enriched into the drop through the organic layer. The enriched enantiomers were then resolved using a dual chiral selector of β-cyclodextrin (β-CD) and sodium taurodeoxycholate (STC). Here, in addition to serving as a labeling reagent providing high fluorescence signal, hydrophobic FITC was primarily used as a modifier aiding the extraction of zwitterionic amino acids by blocking the amino groups and increasing the hydrophobicity, yielding 220 times increase in extraction efficiency. Several hundred-fold enrichments were achieved with 10 min SDME, yielding LODs of 30-60 pM and enabling direct analysis of d-AAs in a 99% enantiomeric excess mixture. In view of no additional modification of the existing commercial CE instrument, this method without stirring can be easily realized using known operations. When a microstirrer was customized to the CE instrument several thousand-fold enrichments could be obtained with LODs in the low picomolar range of 1-3 pM.     

Energy analysis during acoustic bubble oscillations: Relationship between bubble energy and sonochemical parameters

In this work, energy analysis of an oscillating isolated spherical bubble in water irradiated by an ultrasonic wave has been theoretically studied for various conditions of acoustic amplitude, ultrasound frequency, static pressure and liquid temperature in order to explain the effects of these key parameters on both sonochemistry and sonoluminescence. The Keller–Miksis equation for the temporal variation of the bubble radius in compressible and viscous medium has been employed as a dynamics model. The numerical calculations showed that the rate of energy accumulation, dE/dt, increased linearly with increasing acoustic amplitude in the range of 1.5–3.0 atm and decreased sharply with increasing frequency in the range 200–1000 kHz. There exists an optimal static pressure at which the power w is highest. This optimum shifts toward a higher value as the acoustic amplitude increases. The energy of the bubble slightly increases with the increase in liquid temperature from 10 to 60 °C. The results of this study should be a helpful means to explain a variety of experimental observations conducted in the field of sonochemistry and sonoluminescence concerning the effects of operational parameters.     

Antiangular ordering of gluon radiation in QCD media

We investigate angular and energy distributions of medium-induced gluon emission off a quark-antiquark antenna in the framework of perturbative QCD as an attempt toward understanding, from first principles, jet evolution inside the quark-gluon plasma. In-medium color coherence between emitters, neglected in all previous calculations, leads to a novel mechanism of soft-gluon radiation. The structure of the corresponding spectrum, in contrast with known medium-induced radiation, i.e., off a single emitter, retains some properties of the vacuum case; in particular, it exhibits a soft divergence. However, as opposed to the vacuum, the collinear singularity is regulated by the pair opening angle, leading to a strict angular separation between vacuum and medium-induced radiation, denoted as antiangular ordering. We comment on the possible consequences of this new contribution for jet observables in heavy-ion collisions.     

Hysteretic Behaviour and Moisture Buffering of Hemp Concrete

Moisture transfer in hygroscopic building materials affects the indoor air quality by exchanging moisture and buffering the ambient relative humidity variations. The paper deals with experimental and numerical study on hysteretic sorption behaviour of the hemp concrete sorption process. Experimental intermediate scanning curves of hemp concrete are measured and used to compare two hysteresis models, Huang’s model and Carmeliet’s model. An original method is achieved to fit the numerical results on the experimental ones leading to the identification of the main desorption curve. The most relevant model, Huang’s model, is implemented in a heat and moisture transfer model based on Künzel formalism. The transient hydric response of hemp concrete submitted to cyclic hydric loadings is investigated and compared to experimental results issued from the literature. These investigations show the relevance to consider the hysteresis phenomenon into the model. Then, the influence of initial conditions is discussed. The results point out that transient response of hemp concrete strongly depends on the initial hydric state (initial moisture content as well as initial relative humidity).     

Propriétés génériques des trajectoires singulières

We give genericity results for singular trajectories in sub-Riemannian geometry: generically (in the sense of the Whitney topology), every singular trajectory is of minimal order and of corank 1 and in particular is not of Goh type if the rank of the distribution is greater or equal to 3. We extend these results to control-affine systems. To cite this article: Y. Chitour et al., C. R. Acad. Sci. Paris, Ser. I 337 (2003).     

Theoretical study of structures, energetics and vibrational properties of BC H species

Theoretical study using self-consistent field (SCF), hybrid density functional theory (B3LYP) and quadratic configuration interaction including single and double excitations (QCISD) with the Dunning correlation consistent polarized valence double zeta (cc-pVDZ) basis set have been used to examine the structures and vibrational properties of the singlet species with BC H stoichiometry. Relative stabilities are estimated at the CCSD(T)/cc-pVTZ level using QCISD/cc-pVDZ optimized geometries. Five species corresponding to different nuclear arrangements have been studied. The absolute minimum corresponds to the 2 aromatic borirene molecule (HBC H with a BC ring). Ethynylborane (H BCCH, C ) and borallene (H CCBH, C ) are respectively 6.4 and 24.3 kcal/mol higher. Vinylborine (C H B, C ) and H CBCH (C ) are much less stable, 46.2 and 49.1 kcal/mol respectively higher than borirene. The calculated vibrational spectra agree with experiment and confirm the infrared matrix characterization of the three most stable species.     

Theoretical study of the mechanism and rate constant of the B + CO2 reaction

The different stationary points on the potential energy surface relative to the title reaction have been reinvestigated at the B3LYP/aug-cc-pVDZ level with relative energies computed at the CCSD(T)/aug-cc-pVTZ level with B3LYP/aug-cc-pVDZ optimized geometries and by using the G3B3 composite method. Two entrance channels have been identified. The first one corresponds to boron addition at one of the oxygen atoms of the CO 2 molecule leading to trans-BOCO, which is found to be about 27 kcal/mol exothermic with a potential energy barrier of 16.4 kcal/mol (G3B3). The second channel, which has not been identified in previous theoretical works, corresponds to a direct insertion of the boron atom into a CO bond and leads to OBCO. The B + CO 2 --> OBCO step is found to be about 84 kcal/mol exothermic and needs to overcome a potential energy barrier of only 3.6 kcal/mol (G3B3). The rate constant at 300 K of the insertion step, calculated by using TST theory with G3B3 calculated activation energy value, is 5.4 10 (-14) cm (3) molecule (-1) s (-1), in very good agreement with the experimental data ((7.0 +/- 2.8) 10 (-14) cm (3) molecule (-1) s (-1), DiGiuseppe, T. G.; Davidovits, P. J. Chem. Phys. 1981, 74, 3287). The one corresponding to the addition process is found to be several orders of magnitude smaller because of a much higher potential energy barrier. The addition channel would not contribute to the title reaction even at high temperature. A modified Arrhenius equation has been fitted in the 300-1000 K temperature range, which might be useful for chemical models.     

Computational fluid dynamics study of the dry reforming of methane over Ni/Al<Subscript>2</Subscript>O<Subscript>3</Subscript> catalyst in a membrane reactor. Coke deposition

This work investigates the dry reforming of CH₄ as an important process for the conversion of greenhouse gases to synthesis gas. The mixture of methane and CO₂ is readily available in the greenhouse gas which makes realization of dry reforming of methane process more convenient. The paper is an attempt to numerically analyse by computational fluid dynamics (CFD) the coking and gasification mechanisms in the lab-scale membrane module with a fixed-bed supported nickel catalyst (Ni/Al₂O₃). The concentrations and molar fluxes obtained by the simulation are compared with the experimental profiles to validate the CFD model. It was found that working in a catalytic fixed-bed membrane reactor, in the case of the dry reforming of methane and under specific conditions, was not critical, from the point of view of catalyst deactivation.