高能核碰撞中带电多重数快度与能量和中心度的关系

用强子–弦级联模型JPCIAE及相应的Monte Carlo事例产生器研究相对论性核–核碰撞中带电粒子多重数的赝快度密度对能量和中心度的依赖关系.无需另调任何模型参数的条件下,此模型可以同时较好地描述相对论性pp实验数据及PHOBOS和PHENIX实验组的Au+Au实验数据.本文指出:因〈N_part〉并非严格定义的物理量,致使实验上和理论上确定〈N_part〉有一定任意性,从而使得每参加者核子对的带电粒子赝快度密度随着〈N_part〉的增加可能逐渐增大,也可能逐渐减小,因此用它来区分粒子产生机制是欠妥的.     

Synthesis and characterization of white‐light‐emitting polyfluorenes containing orange phosphorescent moieties in the side chain

Two orange phosphorescent iridium complex monomers, 9‐hexyl‐9‐(iridium (III)bis(2‐(4′‐fluorophenyl)‐4‐phenylquinoline‐N,C^2′)(tetradecanedionate‐11,13))‐2,7‐dibromofluorene (Br‐PIr) and 9‐hexyl‐9‐(iridium(III)bis(2‐(4′‐fluorophenyl)‐4‐methylquinoline‐N,C^2′)(tetradecanedionate‐11,13))‐2,7‐dibromofluorene (Br‐MIr), were successfully synthesized. The Suzuki polycondensation of 2,7‐bis(trimethylene boronate)‐9,9‐dioctylfluorene with 2,7‐dibromo‐9,9‐dioctylfluorene and Br‐PIr or Br‐MIr afforded two series of copolymers, PIrPFs and MIrPFs, in good yields, in which the concentrations of the phosphorescent moieties were kept small (0.5–3 mol % feed ratio) to realize incomplete energy transfer. The photoluminescence (PL) of the copolymers showed blue‐ and orange‐emission peaks. A white‐light‐emitting diode with a configuration of indium tin oxide/poly(3,4‐ethylenedioxythiophene):poly(styrenesulfonate)/PIr05PF (0.5 mol % feed ratio of Br‐PIr)/Ca/Al exhibited a luminous efficiency of 4.49 cd/A and a power efficiency of 2.35 lm/W at 6.0 V with Commission Internationale de L'Eclairage (CIE) coordinates of (0.46, 0.33). The CIE coordinates were improved to (0.34, 0.33) when copolymer MIr10PF (1.0 mol % feed ratio of Br‐MIr) was employed as the white‐emissive layer. The strong orange emission in the electroluminescence spectra in comparison with PL for these kinds of polymers was attributed to the additional contribution of charge trapping in the phosphorescent dopants. © 2007 Wiley Periodicals, Inc. JPolym Sci Part A: Polym Chem 45: 1746–1757, 2007     

Plant processing by simultaneous lactic acid fermentation and enzyme hydrolysis

Traditional ensiling of plant material by anaerobic lactic acid fermentation was combined with enzymatic hydrolysis (ENLAC for short) with cell wall degrading enzymes (hemicellulases, cellulases, and pectinases) to increase fiber digestibility or to increase the recovery of cell content from plants. Such findings were made using 0.015% (w/w, wet basis) Phylacell® enzyme preparation by ENLAC of corn and corn-sorghum mixtures, but not of forage grasses. Addition to alfalfa of a mixture of cell wall degrading enzymes, such as NOVO Viscozyme® together with NOVO Celluclast® each at 0.2–1.0% (w/w, wet basis), resulted in more rapid ensiling and improvement of rumen digestibility of silage by 20%. After 20 d of ensiling at 25 °C when the same enzymes were added to alfalfa at the 1.0% level, protein recovery by pressing increased by 35%, β-carotene recovery by 80%, and chlorophyll/xanthophyll recovery by 30%. ENLAC with the same enzymes also increased the recovery of sclareol from muscatel sage by 400%.

     

平台石墨炉原子吸收测磷的方法研究

研究了平台石墨炉原子吸收测定磷的方法,表明以氯化钯和硝酸钙的混合液作为基体改进剂测定生物样品中的磷效果最好,方法特征量为8×10~(-9)g,工作曲线线性范围为0～0.400吸光度,精密度好,抗干扰能力强,方法简单,利用标准曲线即可测定生物样品中磷。     

我国全固态激光技术研发情况及发展趋势

1 Significance of All Solid State Laser (DPL)Technology in Field of Laser Because of the advantages of high conversion efficiency, good beam quality, small size and light weight, DPL becomes the hotspot and priority of development of laser technology. It may be the main body of laser in the future and replace gas laser and liquid laser. It is a great revolution of laser technology.     

Solvothermal synthesis of TiO2: anatase nanocrystals and rutile nanofibres from TiCl4 in acetone

This work reports a new synthetic approach for single‐phase TiO₂ nanomaterials by solvothermal treatment of titanium tetrachloride in acetone at 80–110 °C. Small, uniform, and yet size‐tunable (5–10 nm) anatase titania nanocrystallites were obtained using a low concentration of TiCl₄ in acetone (i.e., at molar ratios of TiCl₄/acetone ≤ 1:15) in the temperature range of 80–110 °C, while rutile nanofibers were synthesized using a high concentration of TiCl₄ (e.g., TiCl₄/acetone = 1:10) at 110 °C. Copyright © 2007 John Wiley & Sons, Ltd.     

傅里叶变换红外光谱仪遥测污染云团的吸收光谱算法

遥感傅里叶变换红外光谱技术因其具有对污染源作无干扰监测、多组分的同时连续测定、区域性或大范围地区的测量等优点,因而已广泛的应用于遥感测量技术。利用傅里叶变换红外(FTIR)光谱仪远距离探测目标,根据探测的目标源是否充满光谱仪的视场,建立了三种辐射模型。在所建立模型的基础上,选用了D&P公司生产的便携式Model-101型傅里叶变换红外光谱仪,实时探测目标云团和背景,运用差谱法和发射光谱法对探测结果进行了光谱分析,进而得到了扣除背景影响后的目标云团吸收光谱。给出了相应的仿真实验结果示例。实验结果表明,由差谱法得到的结果准确度较好。     

新超导体MgCNi3的虚晶掺杂研究

用全势线性缀加平面波方法,考虑局域自旋密度近似研究虚晶掺杂MgCNi3的超导电性和磁性.计算了自旋极化能带结构、体弹性模量和它对压力的导数、原子磁矩 m 及其变化率.计算结果表明,对于电子掺杂的Mg1-xAlxCNi3(0≤x≤0.5), 超导电性和磁涨落随掺杂量的增加逐渐减小.空穴掺杂的Mg1-xNaxCNi3,在x＝0.12处出现铁磁相变,超导电性消失.在MgCNi3少量空穴掺杂区域(0≤x<0.12),表现为超导与磁涨落共存的不稳定状态.     

一种时延范德波尔电磁系统中的复杂行为(Ⅰ)——分岔与混沌现象

建立了一种可积的无穷维系统——时延范德波尔电磁系统，采用Poincaré映射分析了系统随参数E和λ变化发生的分岔与混沌现象，发现这种时延系统具有复杂的非线性动力学特性，例如吸引子共存、间歇性混沌、类似边界碰撞分岔通向混沌以及周期增加的现象.在研究系统时间混沌行为的同时，还对空间混沌行为进行了初步分析，通过描绘空间分布图发现时延范德波尔电磁系统随参数E和λ变化时，在空间中会呈现出周期和混沌等不同的图案. 关键词： 分岔 混沌 无穷维系统 时延范德波尔电磁系统     

p型未掺杂富锌ZnO薄膜的形成和性能研究

以高纯ZnO为靶材,氩气为溅射气体,利用射频磁控溅射技术在石英衬底上生长出纤锌矿结构的富锌ZnO薄膜.薄膜沿(002)择优取向生长,厚约为1.2μm,呈现电绝缘特性.将溅射的ZnO薄膜在10-3Pa,510~1 000 K的温度范围等温退火1 h,室温Hall测量结果表明ZnO薄膜的导电性能经历了由绝缘—n型—p型—n型半导体的变化.XPS测试表明ZnO薄膜的Zn/O离子比随退火温度的升高而降低,但一直是富锌ZnO,说明未掺杂的富锌ZnO也可以形成p型导电.p型未掺杂富锌ZnO薄膜的形成可归因于VZn受主浓度可以克服VO和Zni本征施主的补偿效应.