铂铋金属间化合物催化剂的氧还原与抗甲醇氧化性能

采用氩弧熔炼后热处理方法制备了PtBi金属间化合物材料.采用循环伏安法和旋转圆盘电极进行电化学性能测试.通过在0.5 mol•L^－1 H₂SO₄＋0.25 mol•L^－1 CH₃OH溶液中对氧还原的起始电位和电流密度大小比较发现,与光滑铂电极相比,PtBi金属间化合物具有良好的氧还原催化性能和抗甲醇中毒性能.从结构方面分析了PtBi具有抗甲醇中毒性能的原因,认为是PtBi中Pt-Pt的间距大，不利于甲醇的吸附解离. X射线光电子能谱(XPS)结果表明,PtBi材料中Pt的d电子空穴增加,可能是导致PtBi电极表面氧还原电流增大的原因.     

Treatment of coke plant wastewater by A/O fixed biofilm system

The long-term environmental impacts of wastewa-ter from coke plant can be very high, especially due to the discharge of large amounts of wastewater. The composition of coke plant wastewater is complicated and varies from one factory to another, depending …     

PERFORMANCE IMPROVEMENT OF POLYMERS BY THE ADDITION OF GRAFTED NANO-INORGANIC PARTICLES

An irradiation grafting method was applied for the modification of nanoparticles so that the latter can be added topolymeric materials for improving their mechanical performance using existing compounding techniques. The followingitems are discussed in this paper: (a) chemical interaction between the grafting monomers and the nanoparticles duringirradiation, (b) properties including modulus, yield strength, impact strength and fracture toughness of the resultantcomposites, and (c) possible morphological changes induced by the addition of nanoparticles. Though irradiation graftingpolymerization, nanoparticle agglomerates turn into a nano-composite microstructure (comprised of the nanoparticles and thegrafted, homopolymerized secondary polymer), which in turn builds up a strong interfacial interaction with the surrounding,primary polymeric matrix during the subsequent mixing procedure. Due to the fact that different grafting polymers broughtabout different nanoparticle/matrix interfacial features, microstructures and properties of the ultimate composites could thusbe tailored. It was found that the reinforcing and toughening effects of the nanoparticles on the polymer matrix can be fullybrought into play at a rather low filler loading in comparison to conventional particulate filled composites.     

载体γ-Al2O3和钐对非晶态NiB合金热稳定性的影响

用化学还原法制备了NiB、NiB/Al2O3和NiBSm/Al2O3三种催化剂，它们都呈非晶结构.用等离子耦合发射光谱仪(ICP)对催化剂组分进行了分析，采用差示扫描量热法（DSC）对三种催化剂进行了热稳定性分析.结果表明，载体的引入使非晶态NiB合金的体相组成中B的含量降低.将非晶态NiB合金负载到γ-Al2O3上,可以明显改善非晶态合金的热稳定性，少量Sm可以进一步提高晶化温度.晶化激活能数据亦表明了载体和Sm对非晶结构具有良好的稳定作用.载体和Sm可能通过不同的作用提高了非晶态合金的热稳定性.     

液相还原法制备超细球形镍粉

本文论述了液相还原法直接制备高振实密度球形镍粉的新工艺。采用NiSO_4·5H_2O为原料,利用NaOH调节溶液的pH值并形成Ni(OH)_2,还原剂采用N_2H_4·H_2O,还原过程中加入晶核引发剂及表面活性剂。采用正交实验表安排实验,对影响镍粉振实密度及粒径的因素进行了极差分析。实验数据表明,溶液中镍的初始浓度对产品质量的影响最大,较优工艺组合条件为:初始Ni~(2+)的浓度1.5mol·L~(-1),NaOH用量为理论量的1.1倍,反应温度80℃,表面活性剂用量为每克镍5mg,晶种添加量为还原剂理论用量的0.1％。新工艺可制备振实密度高达3.0以上、质量中位径为1μm的球形镍粉。     

Synthesis and magnetic properties of poly(p‐phthaloyl‐disacetylaceton‐ethylenediimine) metal complexes

Macrocyclic Schiff‐base ligand, bisacetylaceton‐ethylenediimine (BAE) and its transition metal complexes M(BAE) (M = Cu²⁺, Ni²⁺) were synthesized. The complexes having characteristics of aromatic systems and well‐defined one‐dimensional structures, reacted with p‐phthaloyl chloride, to obtain polymer complexes. The complexes were characterized by elemental analysis, inductively coupled plasma (ICP), FT‐IR, and thermal analysis and show good thermal stability. ESR spectra analysis discovered that there are free radicals in the chain of polymers, indicating that a weak magnetic spin‐exchange interaction operates between the metal ions and free radicals. It is found that, as the bridging p‐phthaloyl group is able to propagate the magnetic exchange interaction, the polymer complexes show paramagnetic properties by measurement of temperature dependence of the magnetic property, and obey Curie–Weiss law. Copyright © 2001 John Wiley & Sons, Ltd.     

一种新型共生沸石(T-L)的合成与表征

在Na₂O-K₂O-Al₂O₃-SiO₂-H₂O体系中水热合成了一种新型的共生沸石, 它由L型沸石生长在T型沸石的一端而形成, 称之为T-L型沸石. 通过XRD, SEM, TEM, EDX, IR等手段对其进行了初步的表征. SEM相片表明这种沸石具有特殊的铆钉状外形; 在TEM相片上可以清楚地看到L型沸石的大孔道, 此孔道与L型沸石的表面垂直. 通过EDX的数据计算发现共生沸石的两相有不同的骨架硅铝比: T型沸石部分Si/Al＝3.71, L型沸石部分Si/Al＝3.41. 在该样品中B酸大于L酸.     

The tautomerism of Omeprazole in solution: a 1H and 13C NMR study

The tautomerism of 5(6)-methoxy-2-([(4-methoxy-3,5-dimethyl-2-pyridinyl)methyl] sulfinyl)-1H-benzimidazole (omeprazole) was determined in solution, K(T) = 0.59 in THF at 195 K, in favor of the 6-methoxy tautomer. The assignment of the signals was made by comparison with its two N-methyl derivatives in acetone-d6 and through theoretical calculations of the absolute shieldings (GIAO/DFT/6-311++G**).     

On the copolymerization of acrylates in the modified microemulsion process

Copolymerization of methyl methacrylate, methyl acrylate, butyl methacrylate, and butyl acrylate in turn was performed in the modified microemulsion polymerization process, i.e., continuous addition of monomer to a preemulsified system. It was found that the particle size of the copolymer microlatex did not change distinctly with the monomer composition. The estimation of emulsifier coverage on the microlatex particles indicated that the process switched from a traditional microemulsion to a normal seeded emulsion polymerization very soon after monomer dropping began. Therefore, a longer dropping time is needed to produce a microlatex with narrow dispersed particle size. Besides, in the modified microemulsion polymerization less emulsifier is needed to produce a stable microlatex. This behavior is related to the mechanism of normal seeded emulsion polymerization during monomer dropping.     

一种新的液晶高分子——丁酸壳聚糖的合成与表征

甲壳素几乎不溶于任何溶剂,由于其脱乙酰化产物壳聚糖含自由氨基,能被酸质子化而溶解,所以壳聚糖的应用领域远多于甲壳素.但是壳聚糖也仅能溶于酸性介质中,并不能溶于纯水和普通有机溶剂,因而人们对甲壳素或壳聚糖进行各种化学改性[1,2],寻求溶解性更好尤其能溶于水的衍生物,以扩大其应用范围.本文按文献[2～4]方法合成了O-丁酰化壳聚糖(简称丁酸壳聚糖),首次报道它具有溶致液晶性.