CsNiCl3晶体的光谱精细结构、零场分裂参量及Jahn-Teller效应

应用不可约张量理论构造了三角对称晶场中3d²/3d⁸态离子的45阶可完全对角化的微扰哈密顿矩阵，研究了CsNiCl₃晶体的光谱精细结构、晶体结构、零场分裂参量、Jahn-Telller效应以及自旋单重态对Ni²⁺离子基态能级的影响，理论与实验相符合.在此基础上，进一步研究了以前工作中被忽略的自旋-自旋耦合作用和Trees修正对CsNiCl₃晶体的光谱精细结构和零场分裂参量的影响，发现有四种机理会影响零场分裂参量：1)自旋-轨道耦合机理，2)自旋-自旋耦合机理；3)自旋-轨道与自旋-自旋联合耦合机理；4)自旋-轨道与Trees修正联合耦合机理，其中自旋-轨道耦合机理是最主要的，其他三种机理也是不可忽略的. 关键词： 基态能级 精细结构 零场分裂 自旋-自旋耦合     

掺入Ni元素的LiCoO2晶体光谱结构及电子顺磁共振g因子

在弱场图像下,利用Racah不可约张量算符方法得到了三角对称3d4/3d6电子组态的210阶可完全对角化的微扰哈密顿矩阵、最近邻点电荷模型晶体结构常量公式和电子顺磁共振g因子公式.研究了LiCoO2晶体和掺入Ni的LiCoO2:Ni晶体中Co3+的基态能级、晶体结构和电子顺磁共振g因子.考虑了LiCoO2晶体和LiCoO2:Ni晶体中自旋单重态和三重态对Co3+基态能级的影响,讨论了LiCoO2晶体和在LiCoO2晶体中掺杂Ni后Co3+局域结构常量大小的变化是引起Co3+的基态能级变化的主要原因,理论和实验都证实了这一点.还计算了掺杂前后的电子顺磁共振g因子,计算结果与实验值符合得较好.     

拉曼放大器中放大的自发拉曼散射与拉曼开-关增益关系的研究

研究了拉曼放大器中放大的自发拉曼散射对拉曼开－关增益的影响，并提出了一种利用自发拉曼散射谱来调整拉曼放大器位曼开－关增益平坦的方法，实验采用4个波长为14xx nm的激光二极管作为抽运源，75km的G．652光纤作为传输介质，获得了C波段附近的光放大，同时对此给出了合理的理论解释。     

来自磁光阱中冷原子团的荧光干涉条纹及其应用

实验观察来自磁光阱中冷原子团的荧光经真空系统窗口的平板玻璃反射产生的干涉条纹，理论分析表明从从荧光干涉条纹的强度分布可获得关于俘获原子总数以及密度分布的信息。采用该方法实测了俘获原子总数，并模拟得到了不同密度分布时条纹的对比度变化。     

Using multi-exposure of color fringes to measure the beating motion of a moth

A multi-exposure of color fringes method has been developed to improve the capture speed of a conventional color CCD camera. In the method, four groups of projected fringe patterns encoded with different colors and different directions are stored in one CCD frame. Therefore the capture frequency of the conventional CCD can be improved to 200 Hz. It is available to measure the insect wings with low beating frequency, such as dragonfly, moth, or butterfly, whose beating frequency is about 30–40 Hz. We have used the method to measure the beating motion of a moth successfully.     

The orientation-selective growth of LaNiO3 films on Si(100) by pulsed laser deposition using a MgO buffer

Highly (100)-oriented, (110)-oriented and polycrystalline LaNiO₃ (LNO) films were successfully prepared on Si(100) using an oriented MgO film as a buffer. It was somewhat surprising to find that that the orientation relation between the LNO film and the corresponding MgO buffer was: LNO(100)\MgO(110), LNO(110)\MgO(111) and LNO(polycrystalline)\MgO(100). The crystalline quality of the LNO films was shown to be sensitive to the preparation conditions of the MgO buffer. The film surface was very smooth, without micrometer-sized droplets being observed. All LNO films were of metallic conductivity, with a room-temperature resistivities of approximately 250, 280 and 420 μΩ cm for the (110)-oriented, (100)-oriented and polycrystalline LNO, respectively. Received: 2 April 2001 / Accepted: 23 October 2001 / Published online: 3 June 2002     

Characterizations of Tb:Zn2SiO4 films on silicon wafer prepared by sol-gel dip-coating and solid-phase reaction

Terbium-doped Zn_2SiO_4 films were successfully prepared on Si wafers by a simple sol-gel dip-coating and solid-phase reaction method of ZnO and SiO_2. X-ray diffraction (XRD) and UV－Vis absorption results revealed that films processed below 850℃ were ZnO in wurzite structure, and films processed above 850℃ were Zn_2SiO_4 in wellimite structure. Photoluminescence measurements of the Tb-doped Zn_2SiO_4 films showed two strong emission bands at 490 and 545nm. The photoluminescence lifetime was 4.6ms.     

A Multiobjective Hybrid Metaheuristic Approach for GIS-based Spatial Zoning Model

This paper presents a multiobjective hybrid metaheuristic approach for an intelligent spatial zoning model in order to draw territory line for geographical or spatial zone for the purpose of space control. The model employs a Geographic Information System (GIS) and uses multiobjective combinatorial optimization techniques as its components. The proposed hybrid metaheuristic consists of the symbiosis between tabu search and scatter search method and it is used heuristically to generate non-dominated alternatives. The approach works with a set of current solution, which through manipulation of weights are optimized towards the non-dominated frontier while at the same time, seek to disperse over the frontier by a strategic oscillation concept. The general procedure and its algorithms are given as well as its implementation in the GIS environment. The computation has resulted in tremendous improvements in spatial zoning.