高温超导体制备条件的人工神经网络识别

高温超导体的制备条件要求严格,其掺杂量大小、烧结温度控制等都直接影响实验样本的超导性质。近几年高温超导研究已积累大量实验数据,如何应用人工智能方法处理这些数据寻找更好的合成条件颇有意义。人工神经网络方法在许多领域己显示其处理复杂数据和模式识别的优越性,但尚未应用到化合物制备研究方面。本文对此作了初步尝试。     

Single crystal tin nano-rod arrays electrodeposited by a soft template

Single crystal tin nano-rod arrays were fabricated by the electrodeposition method when amphiphilic triblock copolymer P123 was used as a soft template at a concentration much lower than that for forming a liquid crystalline phase.     

卡尔曼滤波分光光度法同时测定钢样中的硅、磷、砷

研究了在聚乙烯醇存在下,硅、磷、砷钼杂多酸与罗丹明6G形成离子缔合物的反应,建立了能同时测定硅、磷、砷的卡尔曼滤波分光光度法。用于钢样中微量硅、磷、砷的同时测定,操作简便快速,相对误差小于8％。     

The complexation of apo-metallothionein with cadmium ion and its conformation study

The circular dichroism was used to study the complexation of two isoforms of rabbit liver apo-metallothioneins (apo-MT1 and apo-MT2) with Cd²⁺ ion and the influence of Cd²⁺ ion on the conformation of reconstituted MTs. The stability of sulfhydryls of apo-MT has been investigated at the room temperature in the presence of air. The reconstitutions of apo-MT1 with Cd²⁺ ion were carried out atpH 4.71 (stable state) andpH 7.9 (with 90% sulfhydryls oxidated) respectively. it was found that the characteristic CD band at 257 nm(+), 238 nm(?), 226 nm(+) of reconstituted MT with Cd²⁺ ion was the same as native MT atpH 4.71, however only one peak at 243 nm(+) appeared on the CD spectra atpH 7.9 which arose from mononuclear complexes with four separated thiolate ligands per Cd²⁺ ion. The CD spectra of apo-MTs+7 eq Cd²⁺ system were measured at variouspH values. It was found that the peak at 256 nm of apo-MT1 binding Cd²⁺ ion split into two small peaks atpH between 2.42 and 3.02, and became one peak atpH 3.32, while the shapes of Cd peaks of apo-MT2 binding Cd²⁺ ion did not change withpH, indicating that the binding sites and pathway of apo-MT1 binding Cd²⁺ ion were different from those of apo-MT2. A possible mechanism was suggested.     

电子探针定量分析的标准样品——几种多元氧化物单晶

在很高的温度和适宜的生长条件下,分别采用熔盐籽晶法和高温引上法生长了高质量的YAP、NAB、KTP、LN、BBO、SBN等多元氧化物单晶,它们具有优良的物理化学性能,严格的化学比,固定的组成与结构以及较好的化学均匀性和电子束轰击下的稳定性。广泛地用于激光和非线性光学领域。我们选用这些晶体为原材料研制电子探针定量分析的标准样品。经过测量和标定,这些单晶标样符合中华人民共和国国家标准GB 4930-85(电子探针显微分析标准样品通用技术条件)的规定。含有稀土元素的标样如NAB和YAP能发出绿色荧光,是电子显微术中理想的阴极发光材料。     

二苄亚砜硝酸钕的晶体结构

二苄亚砜硝酸钕Nd(NO_3)_3·[(C_6H_5CH_2)_2S0]属三斜晶系,P1空间群,晶胞参数:a=9.835(2),b=12.445(2),c=19.971(5)A,α=104.13(2)°,β=90.34(2)°γ=74.96(1)°Z=2。晶体结构用重原子法解出,经最小二乘修正后R因子为0.031。钕离子由九个氧配位,形成稍歪扭的三帽三方棱柱配位多面体,其中一个三角面由三个二苄亚砜(DBSO)提供的氧形成,其他氧原子则由硝酸根提供。平均Nd-O(DBSO)=2.379A,Nd-O(NO_3)=2.536A。     

铽(Ⅲ)-1,4-双(1′-苯基-3′-甲基-5′-氧代吡唑-4′-基)丁二酮-[1,4]体系荧光性质的研究及应用

本文研究了Tb(Ⅲ)-1,4-双(′-苯基-3′-甲基-5′-氧代吡唑-4′-基)丁二酮-[1,4](BPMPBD)-溴化十六烷基三甲胺(CTMAB)体系的荧光性质,探讨了响影体系荧光性质的诸因素,确定了最佳实验条件。该体系中Tb(Ⅲ)浓度以2.0×10~(-5)～1.0×10~(-10)mol/L范围内与其荧光强度呈线性关系,检测限可达到5.0×10~(-11)mol/L。应用于合成样品中微量Tb(Ⅲ)的分析,结果令人满意。     

Preparation and electrochemistry of azobenzene self-assembled monolayers on gold--long range tunneling and end-group hydrogen bonding effect

A series of thiol-functionalied azobenzene derivatives (RAzoCnSH: R=H for n=3-6, abbreviated as AzoCnSH; R=CH(3)CONH for n=4, abbreviated as aaAzoC4SH) on gold electrodes were prepared and their self-assembly and electrochemical properties were studied by cyclic voltammetry. They all formed uniform and reproducible self-assembled monolayers (SAMs) on gold and showed well-behaved voltammetric responses in aqueous solution. Both the length of the alkyl chain spacer and the H-bonding of the end acetamino group had effects on the stability and the electrochemical kinetics of the SAMs, and the effect of the H-bonding was dominant. The surface coverage of the SAMs (AzoCnSH) is gradually increased with an increase of the alkyl chain spacer length, whereas the presence of the terminal acetamino group leads to a greater increase of the surface coverage. At a low scan rate, voltammetric responses corresponding to an irreversible two-electron, two-proton reduction/oxidation of the trans-azobenzene redox center were obtained in the range of +300 mV and -800 mV, which exhibited very large peak-to-peak splitting. At a high scan rate of 500 mV/s, two steps of reversible one-electron, one-proton reduction/oxidation corresponding to the cis-isomer in azobenzene-thiol SAMs (n is odd) was clearly observed between +300 and -200 mV. The apparent electron-transfer rate is decreased with increasing distance between the azobenzene redox center and the gold electrode. The existence of the end acetamino group which restricted the conformational change during the redox process also led to a decrease of the standard rate constant, and this restriction effect is more predominant than the distance effect.     

A systematic density functional theory study of the electronic structure of bulk and (001) surface of transition-metals carbides

A systematic study of the bulk and surface geometrical and electronic properties of a series of transition-metal carbides (TMC with TM = Ti, V, Zr, Nb, Mo, Hf, Ta, and W) by first-principles methods is presented. It is shown that in these materials the chemical bonding is strongly covalent, the cohesive energies being directly related to the bonding-antibonding gap although the shift of the center of the C(2s) band related peak in the density of states with respect to diamond indicates that some metal to carbon charge transfer does also take place. The (001) face of these metal carbides exhibits a noticeable surface rumpling which grows along the series. It is shown that neglecting surface relaxation results in very large errors on the surface energy and work function. The surface formation induces a significant shift of electronic energy levels with respect to the corresponding values in the bulk. The extent and nature of the shift can be understood from simple bonding-antibonding arguments and is enhanced by the structural rippling of this surface.