纳米复合固体超强酸SO_4~(2-)/ZrO_2-Fe_2O_3的制备及其催化合成硝基苯的研究

采用纳米化学技术制备了新型的纳米复合固体超强酸催化剂SO42-/ZrO2-Fe2O3,并用XRD、TEM进行了表征.结果表明:所研制的SO42-/ZrO2-Fe2O3催化剂为晶态纳米粒子,平均粒径为30 nm,分散性较好;当活化温度为580℃,反应温度为75℃,n(硝酸)/n(苯)=2,m(苯)/m(催化剂)=20,催化反应时间5 h时,硝基苯收率可达89.6%.     

POLYMERIZATION MECHANISM OF N-VINYLCARBAZOLE WITH CHIRALLY ORGANIC SALT AS CATALYST

The polymerization mechanism is described by the conductance changewith the time during the polymerization. The mechanism can be explained by the equi-librium feature (i.e. main ion-pairs) between the free ions and the ion-pairs dissociated bythe organic salt (-) Sp~/(*~+) (+) CSA~(*~-) (An asterisk represents the chirality) and the schemeof the polymerization process is described mainly by the charge transfer complexes havingchiral induction power.     

Characterization of low molecular weight components of [(ViMe2SiO1/2)x(PhSiO3/2)y(SiO4/2)z], [(ViMe2SiO1/2)x(SiO4/2)y], and [(SiO4/2)x(HO1/2)y(tBuO1/2)z] silsesquioxanes by electrospray ionization fourier transform mass spectrometry (ESI-FTMS)

This paper describes the characterization of low molecular weight components of four materials using electrospray ionization Fourier transform mass spectrometry (ESI-FTMS). The materials in the current study are [(ViMe₂SiO_1/2)_x(PhSiO_3/2)_y(SiO_4/2)_z] (MTQ), [(ViMe₂SiO_1/2)_x(SiO_4/2)_y] (MQ), and [(SiO_4/2)_x(HO_1/2)_y(^tBuO_1/2)_z] (Q) silsesquioxanes. Accurate mass measurements coupled with knowledge of resin chemistry afforded siloxane composition determination that was used to propose specific structures for the oligomers. Branched or linear (T_nQ_mM_n+2m+2), and monocyclic (T_nQ_mM_n+2m) structures are predominant structures for the low molecular weight species in MTQ. For MQ and Q, more condensed structures, such as partially opened cage structures (Q_mM_2m?6 and Q_mM_2m?8), were identified. The differences between MQ, Q, and MTQ are likely attributed to differences in intrinsic structure and reactivity of T and Q building blocks. The structural information obtained for these oligomeric species will ultimately provide a better understanding of new resin materials and their associated physical properties.     

超声场下苯酚吸附相平衡和均相催化剂氧化降解实验研究

测定了常规条件和超声场条件下苯酚在活性炭上的吸附等温线,并研究了超声再生活性炭和均相催化剂氧化降解苯酚实验.研究结果表明,超声场作用下苯酚在活性炭上的吸附等温线降低,平衡吸附量减少,被脱附下来的苯酚及时被Cu2 和Fe3 型催化剂氧化降解,吸附剂得到更彻底再生,避免了二次污染,而且再生后的活性炭均具有较高的二次吸附能力,对于处理低浓度含酚废水具有实际意义.     

甲胺磷离子选择性电极的研制及其应用

以四苯硼钠与甲胺磷在盐酸介质中生成的离子缔合物为电活性物质,首次研制出一种甲胺磷PVC涂层玻璃电极。并对该电极的响应机理及性能进行了研究。实验表明,该电极的Nernst响应范围为1×10-2~1×10-4(φ),斜率为50.28 mV/pφ。该电极响应迅速,重复性好,用于蔬菜中残留甲胺磷的测定,方法快速、准确,结果满意。     

STUDY ON METHANOLYSIS STABILITY OF OPTICALLY ACTIVE COPOLYMERS OF TRIPHENYLMETHYL METHACRYLATE AND METHYL METHACRYLATE

The methanolysis of poly(triphenylmethyl methacrylate) (PTrMA) and its copoly-mers P(TrMA-co-MMA), P(TrMA-b-MMA) has been studied in the presence of anhydrousmethanol at 40℃ by electroconductometric method. It has been found that the methanoly-sis stability can be obviously improved for the copolymer, especially, the radom copolymer,P(TrMA-co-MMA).     

联吡啶铁/H2O2体系在可见光下降解芥子气模拟剂2-CEES

采用联吡啶铁/H2O2体系在可见光照射条件下(λ>450nm)降解芥子气模拟剂2-氯乙基乙基硫醚(2-CEES).考察了不同反应条件下的降解效果,通过EPR分析确定了反应过程中产生的高活性物种,利用GC-MS和NMR等方法分析了反应的产物,跟踪了反应过程中TOC的变化,并根据结果对2-CEES光催化降解的反应机理进行了探讨.     

PEO-LiClO_4-ZSM5 composite polymer electrolyte (IV): Polarized optical microscopy study

All solid-state lithium polymer batteries may be one of the best choices for the future electrochemical power source, characterized by high energy densities, good cyclability, reliability and safety[1,2]. Owing to its potential capability to replace the t…     

STUDY ON THE EFFECT OF POLYSTYRENE SULFONIC ACID MACROMOLECULES ON THE POLYMERIZATION OF ACRYLAMIDE

The effect of polystyrene sulfonic acid (PSSA) macromolecules on the polymerization of acrylamide (AM) has been studied. It was found that the rates of polymerization of AM were greatly increased in the presence of PSSA in the polymerization system.The maximum value of the rate of polymerization of AM was obtained when the ratio of [—SO_3H]: [AM] reached 3:1. When the insoluble crosslinked PSSA was used instead of the soluble one, this effect decreased considerably. The interaction between molecules of PSSA and AM was determined by infrared spectroscopy, elementary analysis and X-ray photoelectron spectroscopy. The combination form, —SO_3-NH_3~ CO—, formed between sulfonic group and amide group was found to be existed since the infrared absorption band of —NH_2 shifted from 3400cm~(-1) to 3150 cm~(-1), the binding energy of electron N_(18) changed from 399.7 eV to 401.3 eV, and the atomic ratio of N to S of the products was similar to the ratio of reagents. Based on these experimental results, the mechanism of AM polymerization in the presence of PSSA is proposed. The initial step is the combination of AM with sulfonic group to form —CONH_3~ , then followed by polymerization on the PSSA macromolecule. The role of PSSA on the polymerization of AM is discussed.     

SAPO—11分子筛用i—Pr2NH导向合成及其酸性研究

以ＡｌＰＯ４、Ｈ３ＰＯ４、ＳｉＯ２等为原料采用单一模板剂ｉＰｒ２ＮＨ合成了ＳＡＰＯ１１分子筛，利用Ａｖｒａｍｉ方程等对合成过程进行了定量描述。还利用红外（ＩＲ）、程序升温脱附（ＴＰＤ）、线性丁烯骨架异构反应催化活性测试等手段表征了ＳＡＰＯ１１的酸性。结果表明，合成过程随温度有明显变化，晶化阶段的活化能远高于核化阶段的值。可用Ａｖｒａｍｉ方程的参数来表征合成过程的难易程度。分子筛中存在Ｂ酸和Ｌ酸位，主要在中等强度范围，从而对线性丁烯骨架异构反应有较好的催化活性。提高分子筛中硅含量可明显增大酸位浓度，酸强度也有轻度增强。