Direct dynamics trajectory study of the reaction of formaldehyde cation with D2: vibrational and zero-point energy effects on quasiclassical trajectories

Quasiclassical, direct dynamics trajectories have been used to study the reaction of formaldehyde cation with molecular hydrogen, simulating the conditions in an experimental study of H2CO+ vibrational effects on this reaction. Effects of five different H2CO+ modes were probed, and we also examined different approaches to treating zero-point energy in quasiclassical trajectories. The calculated absolute cross-sections are in excellent agreement with experiments, and the results provide insight into the reaction mechanism, product scattering behavior, and energy disposal, and how they vary with impact parameter and reactant state. The reaction is sharply orientation-dependent, even at high collision energies, and both trajectories and experiment find that H2CO+ vibration inhibits reaction. On the other hand, the trajectories do not reproduce the anomalously strong effect of nu2(+) (the CO stretch). The origin of the discrepancy and approaches for minimizing such problems in quasiclassical trajectories are discussed.     

Polar substituent effects in the bicyclo[1.1.1]pentane ring system: acidities of 3-substituted bicyclo[1.1.1]pentane-1-carboxylic acids

Experimental gas-phase acidities are reported for a series of 3-substituted (X) bicyclo [1.1.1]pent-1-yl carboxylic acids (1, Y = COOH). A comparison with available calculated data (MP2/6-311++G**// B3LYP/6-311+G**) reveals good agreement. The relative substituent effects are shown to be adequately described by a much lower level of theory (B3LYP/6-31+G*). Various correlations are presented which clearly point to polar field effects as being the origin of the relative acidities.     

Lipase from a Brazilian StrainPenicillium citrinum Cultured in a Simple and Inexpensive Medium st]Heat-Denaturation, Kinetics, and pH Stability

This work is a study of lipase production by a Brazilian strain ofPenicillium citrinum using an inexpensive and simple medium without organic nitrogen sources and of some important industrial properties, including thermostability in relation to ionic strength. The maximal lipase activity (1585 U/L) was obtained whenPenicillium citrinum was cultured on 0.75% ammonium sulfate complemented with minerals salts instead of yeast extract. Although this activity was about 55% lower than that produced in medium with yeast extract (2850 U/L), the specific activity (7.8 U/mg proteins) was higher than that obtained with the yeast extract (4.9 U/mg proteins). The morphology of fungus changed totally, with yeast extract there are smooth, solid, and spherical pellets whereas on ammonium sulfate there are small “hairy” pellets uniformly suspended in the medium. The effect of ferrous (Fe⁺⁺) ions was carried out using medium MA with and without Fe⁺⁺ ions. Lipase production byPenicillium citrinum in medium MA requires Fe⁺⁺ ions, the absence of which caused a decreased of about 50% in the specific activity (3.5 U/mg proteins). The utilization of commercial, locally available oils as carbon sources, such as soybean oil (236 U/L) and corn oil (74 U/L) resulted in lower activity compared to olive oil, showing that lipase production byPenicillium citrinum is specifically induced by olive oil. Potassium concentration in the medium can effects the production of lipase (1 mM (1585 U/L), 10 mM (1290 U/L), and 30 mM (1238 U/L), 50 mM (195 U/L), and 100 mM (2 U/L). The crude culture filtered was susceptable to thermal deactivation. It was stable at pH 6.0, but was not stable at the optimum pH (8.0-8.5) at 50 mM. At the low ionic concentration (1-25 mM) this lipase was stable at low pH (3.5-4.0). The activation energy was 22.4 ±2.2 Kcal. mol 1.     

Colloidal nano-MOFs nucleate and stabilize ultra-small quantum dots of lead bromide perovskites

The development of synthetic routes to access stable, ultra-small (i.e. <5 nm) lead halide perovskite (LHP) quantum dots (QDs) is of fundamental and technological interest. The considerable challenges include the high solubility of the ionic LHPs in polar solvents and aggregation to form larger particles. Here, we demonstrate a simple and effective host–guest strategy for preparing ultra-small lead bromide perovskite QDs through the use of nano-sized MOFs that function as nucleating and host sites. Cr₃O(OH)(H₂O)₂(terephthalate)₃ (Cr-MIL-101), made of large mesopore-sized pseudo-spherical cages, allows fast and efficient diffusion of perovskite precursors within its pores, and promotes the formation of stable, ∼3 nm-wide lead bromide perovskite QDs. CsPbBr₃, MAPbBr₃ (MA⁺ = methylammonium), and (FA)PbBr₃ (FA⁺ = formamidinium) QDs exhibit significantly blue-shifted emission maxima at 440 nm, 446 nm, and 450 nm, respectively, as expected for strongly confined perovskite QDs. Optical characterization and composite modelling confirm that the APbBr₃ (A = Cs, MA, FA) QDs owe their stability within the MIL-101 nanocrystals to both short- and long-range interfacial interactions with the MOF pore walls.

We demonstrate a simple and effective host–guest strategy for preparing ultra-small lead bromide perovskite QDs through the use of nano-sized MOFs that function as nucleating and host sites.     

Synthesis of the C(43)-C(67) fragment of amphidinol 3

[reaction: see text] A synthesis of the C(43)-C(67) fragment of amphidinol 3 (AM3) has been accomplished by a route that features the use of a double allylboration reaction for synthesis of 1,5-diol 4b, which serves as a precursor to dihydropyran 11.     

Efficient low-temperature oxidation of carbon-cluster anions by SO2

Carbon-cluster anions, CN-, are very reactive toward SO2 (sticking probability of 0.012 +/- 0.005 for C27- at 25 degrees C), in contrast to their inertness toward other common atmospheric gases and pollutants. In flow reactor experiments at ambient temperature and near atmospheric pressure, primary adsorption of SO2 by the carbon cluster anions, N = 4-60, yields CNSO2- or CN-1S-. The inferred elimination of neutral CO2 is also detected as meta-stable decay in collision-induced dissociation. At higher temperatures, the reaction of SO2 with nascent carbon clusters yields CN-1SO- as well as undetected CO. The size-dependent initial reactivity reflects the previously established structural transitions (i.e., from chain to cyclic to cage structures). Such carbon clusters are formed in sooting flames and may act as nuclei for the formation of primary soot particles and serve as models for the local structural features of active soot particle sites for black-carbon soot. The facile generation of reactive carbon-sulfide and -sulfinate units may therefore have implications for understanding the health and environmental effects attributed to the coincidence of soot and SO2.     

Evidence for a nonradical pathway in the photoracemization of aryl sulfoxides

Photolysis of (R(S),S(C))-1-deuterio-2,2-dimethylpropyl p-tolyl sulfoxide provides mainly (S(S),S(C))-1-deuterio-2,2-dimethylpropyl p-tolyl sulfoxide at low conversion, though the other two stereoisomers are formed to smaller extents. Thus, the predominant process leading to sulfur inversion yields only sulfur inversion, without inversion of the adjacent CHD stereogenic center. This is taken as evidence for a mechanism for photochemical epimerization of sulfoxides that does not involve homolytic alpha-cleavage chemistry.     

Proteomic analysis of the Arabidopsis thaliana cell wall

With the completion of the Arabidopsis genome, many hypothetical proteins have been predicted without any information on their expression, subcellular localisation and function. We have performed proteomic analysis of proteins sequentially extracted from enriched Arabidopsis cell wall fractions and separated by two-dimensional gel electrophoresis (2-DE). The proteins were identified by peptide mass fingerprinting using matrix-assisted laser desorption/ionisation-time of flight (MALDI-TOF) mass spectrometry and genomic database searches. This is part of a targeted exercise to establish the entire Arabidopsis secretome database. We report evidence for new proteins of unknown function whose existence had been predicted from genomic sequences and, furthermore, localise them to the cell wall. In addition, we observed an unexpected presence in the cell wall preparations of proteins whose known biochemical activity has never been associated with this compartment hitherto. We discuss the implications of these findings and present results suggesting a possible involvement of cell wall kinases in plant responses to pathogen attack.     

Chemical, structural, and thermal properties of Zn(II)-Cr(III) layered double hydroxides intercalated with sulfated and sulfonated surfactants

Zn(II)-Cr(III)-LDHs (layered double hydroxides) containing sulfated or sulfonated surfactants as the interlamellar anion were synthesized by the coprecipitation method. The syntheses were conducted under various different experimental conditions, such as the Zn : Cr ratio, pH, and aging time. In each of the prepared materials, unlike previously reported data, the interlayer anion arrangement did not change, being consistent with a perpendicular monolayer. The thermal decomposition process of the prepared materials was studied by a set of analysis methods, such as TG/DTA, TG/MS, PXRD, and FT-IR. From the results obtained it was possible to conclude that, in an air atmosphere, the anions decomposed by a partial combustion, leading to the formation of sulfide. The results also showed that sulfonated surfactants containing LDHs are much more stable than those containing sulfated surfactants. A mechanism was proposed for the thermal decomposition of such LDHs based on the experimental results.     

Synthesis and crystallographic characterization of a dicyclopentadienylvanadium alkynide complex: (C5H5)2VCCC(CH3)3

(C₅H₅)₂VCl reacts with LiCCC(CH₃)₃ to form (C₅H₅)₂VCCC(CH₃)₃ which was characterized by spectroscopic, analytical, and crystallographic methods. The complex crystallizes from pentane at 0°C as a monomer in the orthorhombic space group Pnma with four molecules in a unit cell of dimensions a 9.075(3), b 9.807(3), c 16.444(5) Å. Full-matrix least-squares refinement based upon 1300 nonzero intensity data converged to a final conventional R factor of 0.060. The molecule has a mean VC₅H₅-ring centroid distance of 1.941 Å with 146.6° ring centroid-V-ring centroid angle. The vanadium alkynide carbon distance is 2.075(5) Å.