Microsensor Chip Integrated with Gold Nanoparticles‐Modified Ultramicroelectrode Array for Improved Electroanalytical Measurement of Copper Ions

This paper presents a microsensor chip integrated with a gold nanoparticles‐modified ultramicroelectrode array (UMEA) as the working electrode for the detection of copper ions in water. The microsensor chip was fabricated with Micro‐Electromechanical System technique. Gold nanoparticles were electrodeposited onto the surface of UMEA at a constant potential of ?0.3 V. The ratio d/R_b of interelectrode spacing (d) over the individual electrode’s radius (R_b) was investigated to improve the electrochemical performance. The UMEA with a d/R_b of 20 showed the best hemispherical diffusion mode, resulted in fast response time and high current response. The gold nanoparticles increased the active surface area of UMEA by not changing the geometries of UMEA, and the current response was increased further. Incorporating the optimized characteristic of UMEA and gold nanoparticles, the microsensor showed a good linear range from 0.5 to 200 µg L^?1 of copper ions in the acetate buffer solutions with the method of square wave stripping voltammetry. Compared with the gold nanoparticles‐modified disk electrode, the gold nanoparticles‐modified UMEA showed higher sensitivity (0.024 µA mm^?2 µg^?1 L) and lower limit of detection (0.2 µg L^?1). Water samples from river water and tap water were analyzed by the microsensor chip with recovery ranging from 100.7 % to 107.8 %.     

Liquid fragility of the unsaturated polyester resin

Curing behaviors of the unsaturated polyester resin (UPR) containing 1–1.8 wt% methyl ethyl ketone peroxide (MEKP) initiator are investigated. The viscosity, gelation and vitrification transition of the UPR-MEKP systems are examined using the rotating viscometer and differential scanning calorimetry (DSC). A liquid fragility parameter, M _c, defined as the viscosity variation rate of the liquids towards the curing temperature is presented. It is found that M _c has a good negative relation with the glass transition temperature (T _g) in the systems. M _c can be used for predicting the stability of the cured amorphous systems. The relationship between the liquid and cured thermoset polymer systems is studied from both the thermodynamic and kinetic point of view.     

Foams stabilized by mixed cationic gemini/anionic conventional surfactants

The mixed adsorption of a cationic gemini surfactant, ethanediyl-1,2-bis(dodecyldimethylammonium bromide) (abbreviated as 12-2-12), and an anionic conventional surfactant, sodium dodecyl sulfate (SDS), was examined using surface tension measurements. The viscoelastic properties of the mixed films were investigated by dilational interfacial rheology technique. The results showed that the addition of SDS promoted the close packing of adsorbed molecules at the interface, which increased the dilational elasticity of the mixed films. The stability of the foams was determined by the half-life of foam height collapse. The foams generated by 12-2-12/SDS mixtures were more stable than that formed by pure 12-2-12. In the presence of sodium bromide, the foam stability was further enhanced and the surfactant concentration required to attain the maximum effect in stabilizing foams was greatly reduced. The high foam stability could well relate to the high elasticity of the film.     

Excellent degradation performance of azo dye by metallic glass/titanium dioxide composite powders

The metallic glass/titanium dioxide powders (MG/TiO₂) with enhanced photocatalytic oxidation activity were synthesized, which exhibit a higher efficiency in decolorizing methylene blue solutions (MB). Compared with the pure TiO₂ and crystalline alloy/TiO₂ (CA/TiO₂) under the same circumstances, its degradation rate was 60 % and 30 % higher, respectively. Furthermore, compared with the CA/TiO₂, the MG/TiO₂ photocatalytic rate was three times faster when decolorizing MB. Considering the excellent intrinsic high-performance photocatalytic degradation under visible light irradiation, these novel powders were proven to have potential applications in water purification industry.     

Synthesis of Imides by Palladium‐Catalyzed C?H Functionalization of Aldehydes with Secondary Amides

An efficient palladium‐catalyzed C? H functionalization of aldehydes with various N‐substituted N‐heteroarene‐2‐carboxamides has been developed for the synthesis of secondary imides. The reaction tolerates various functionalities, such as methoxy, fluoro, chloro, and bromo groups. A tentative radical mechanism for a Pd^II/Pd^IV catalytic cycle is proposed.     

High‐Order Soliton Solution of Landau–Lifshitz Equation

The Landau–Lifshitz equation is analyzed via the inverse scattering method. First, we give the well‐posedness theory for Landau–Lifshitz equation with the frame of inverse scattering method. The generalized Darboux transformation is rigorous considered in the frame of inverse scattering transformation. Finally, we give the high‐order soliton solution formula of Landau–Lifshitz equation and vortex filament equation.     

Rapid analysis of phthalic acid esters in environmental water using fast elution gas chromatography with mass spectrometry and adaptive library spectra

A method for the fast determination of the components in a complex sample by using gas chromatography with mass spectrometry was developed and used for the quantitative analysis of phthalic acid esters in environmental water. In the method, the adaptively corrected mass spectra were used to compensate for the differences between the library spectra and the measured ones in the experiment. The correction was obtained by the iterative transformation of the library spectra using iterative target transformation factor analysis, and the resolution was performed by non‐negative immune algorithm using the corrected spectra. Rapid analysis of 16 phthalic acid esters in water samples was achieved using fast elution gas chromatography with mass spectrometry measurements. The results show that the mass spectra and chromatographic profiles of the phthalic acid esters can be obtained from the overlapping signal of 13 min elution, and accurate quantitative analysis can be obtained. The recoveries of the phthalic acid esters obtained by standard addition are between 90.3 and 107.4%, and the relative standard deviations obtained in repeated measurements are less than 9%.     

FeO(OH)@C-Catalyzed Selective Hydrazine Substitution of p-Nitro-Aryl Fluorides and their Application for the Synthesis of Phthalazinones

An efficient hydrazine substitution of p-nitro-aryl fluorides with hydrazine hydrates catalyzed by FeO(OH)@C nanoparticles is described. This hydrazine substitutions of p-nitro-aryl fluorides bearing electron-withdrawing groups proceeded efficiently with high yield and selectivity. Similarly, hydrogenations of p-nitro-aryl fluorides containing electron-donating groups also smoothly proceeded under mild conditions. Furthermore, with these prepared aryl hydrazines, some phthalazinones, interesting as potential structures for pharmaceuticals, have successfully been synthesized in high yields.     

Analytical analysis of anisotropic thermophoresis of a charged spheroidal colloid in aqueous media for extremely thin EDL cases

Thermophoresis of charged spheroids has been widely applied in biology and medical science. In this work, we report an analysis of the anisotropic thermophoresis of diluted spheroidal colloids in aqueous media for extremely thin EDL cases. Under the boundary layer approximation, we formulate the thermophoretic velocity, the thermophoretic force, and the thermodiffusion coefficient of a randomly dispersed spheroid. The parametric studies show that under the aforementioned conditions, the thermophoresis is anisotropic and its thermodiffusion coefficient should be considered as a vector, D _T. The thermodiffusion coefficient values and directions of D _T are strongly related to the aspect ratio and the angle θ between the externally applied temperature gradient and the particle's axis of revolution: The increasing aspect ratio enlarges the thermodiffusion coefficient value D_T of prolate (oblate) spheroids to a constant value when θ < 60° (θ > 45°), and it reduces D_T of prolate (oblate) spheroids to a constant value when θ > 60° (θ < 45°). The thermodiffusion coefficient direction of both prolate and oblate spheroids deviates slightly from −∇T_∞ for a small aspect ratio, and such deviation becomes serious for a large aspect ratio.     

PBFC-PI量子动力学方法及应用

对多原子体系的量子动力学计算非常重要, 然而, 对含六原子以上的分子体系进行精确量子动力学计算仍具挑战性. 面向过程的基函数定制(PBFC)-并行迭代(PI)方法是一种高效的量子动力学方法, 已应用于对含九原子的丙二醛异构体系的氢迁移速率的精确量子计算. 本综述首先阐明了PBFC的基本思想, 之后重点回顾了PBFC-PI方法的具体内容、 该方法与其它方法的结合及其应用方面的新进展. 应用这些方法实现了对单氢迁移、 协同双氢迁移和分步双氢迁移3种类型基准体系的大规模并行计算, 有助于获得对氢迁移过程的新认识.