Synthesis of pyrazolo[3,4-d]pyrimidine derivatives using ketene dithioacetals

The cyclization of 5-amino-3-methylthiopyrazole-4-carbonitriles or 4-carboxamides 3a-j , which were prepared by the reaction of ketene dithioacetals 1a,b [1a : bis(methylthiomethylenemalononitrile; 1b : bis(methylthio)methylenecyanoacetamide] with hydrazines (hydrazine hydrate, phenylhydrazine, p-chlorophenylhydrazine, p-nitrophenylhydrazine), with formamide or carbon disulfide proceeded to give the corresponding 4-amino- or 4-hydroxy-3-methylthiopyrazolo[3,4-d]pyrimidines 6a-h in good yields. 3-Aminopyrazolo[3,4-d]pyrimidine derivatives 6i-1 were also obtained by the application of the cyclization reaction of 3,5-diaminopyrazoles with formamide.     

Deoxyfluorination of alcohols using N,N-diethyl-α,α-difluoro-(m-methylbenzyl)amine

Deoxyfluorination of alcohols was carried out using N,N-diethyl-α,α-difluoro-(m-methylbenzyl)amine (DFMBA). Primary alcohols were effectively converted to fluorides under microwave irradiation or conventional heating. Deoxyfluorination of an anomeric hydroxy group in sugars by DFMBA proceeded at below room temperature and glycosyl fluorides could be obtained in good yields. The deoxyfluorination reaction chemoselectively proceeded and various protecting groups on the sugar can survive under the reaction conditions.     

Pd/C-catalyzed room-temperature hydrodehalogenation of aryl halides with hydrazine hydrochloride

Treatment of aryl and heteroaryl halides with catalytic amounts of Pd/C in the presence of hydrazine hydrochloride in basic medium (sodium hydroxide or sodium t-butylate) at room temperature leads to the corresponding hydrodehalogenation products with high selectivity. Aryl iodides, bromides, chlorides and fluorides can be reduced using this reagent combination. The reduction is compatible with various electron-donating or electron-withdrawing groups.     

Synthesis and Transformations of 4-Phosphorylated 2-Alkyl(aryl)-5-hydrazinooxazoles

Treatment of 1-phosphorylated 2,2-dichloroethenylcarboxamides with excess hydrazine hydrate gives in high yields phosphorylated derivatives of 2-alkyl(aryl)-5-hydrazinooxazoles containing the P(O)(OCH₃)₂, P(O)(OC₂H₅)₂, and P⁺(C₆H₅)₃ClO₄ ^- groups in the 4-position of the ring. The presence of the hydrazine group in these oxazole derivatives was confirmed not only by the spectral data, but also by the reactions with p-toluic aldehyde, p-toluic chloride, and phenyl isothiocyanate.     

Tetrathienylethene‐based Positional Isomers with Aggregation‐induced Emission Enabling Super Red‐shifted Reversible Mechanochromism and Naked‐eye Sensing of Hydrazine Vapor

AIE‐active positional isomers, TTE‐o‐PhCHO , TTE‐m‐PhCHO and TTE‐p‐PhCHO , tetrathienylethene ( TTE) derivates with peripherally attached ortho‐/meta‐/para‐formyl phenyl groups, were designed and synthesized. The formyl substitution position can effectively modulate their photophysical properties, mechanochromism and fluorescent response to hydrazine. TTE‐o‐PhCHO and TTE‐m‐PhCHO exhibit remarkable AIE characteristics, and TTE‐p‐PhCHO possesses aggregation‐induced emission enhancement performance. They all exhibit high contrast mechanochromism, and TTE‐m‐PhCHO shows larger red‐shift (164 nm) than TTE‐o‐PhCHO (104 nm) and TTE‐p‐PhCHO (125 nm) due to the more twisted molecular conformation and much looser molecular packing. Moreover, TTE‐o‐PhCHO with a higher contrast color change can be used as ink‐free rewritable paper. In addition, TTE‐p‐PhCHO , as a turn‐on fluorescent probe, can selectively detect hydrazine with significant color changes that are visible by the naked eye . Therefore, the position dependence of groups would be an effective method to modulate the molecular arrangement, as well as develop AIE compounds for mechano‐stimuli responsive materials, ink‐free rewritable papers and chemosensors.     

Selective Reduction of Nitroarenes with Molybdenum Disulfide

Commercial MoS₂ was found to be a highly selective catalyst for the reduction of nitrobenzenes to the corresponding anilines with hydrazine under mild conditions. MoS₂ is not only much cheaper, but also more selective than noble metal catalysts for the reduction of functional nitrobenzenes to the corresponding anilines. Nitrobenzenes with halides (F, Cl, Br and I) were reduced selectively, and the corresponding anilines were obtained in excellent yields, and no dehalogenation was detected. Functional groups such as NH₂, OH, alkene groups were tolerated during the reduction of the nitro compounds. The reduction of p‐chloronitrobenzene was studied over MoS₂ and Pd/C respectively with hydrazine. The yield of p‐chloroaniline was much higher with MoS₂ than that with Pd/C at full conversion.     

Rapid Access for the Synthesis of 1‐N‐Methyl‐spiro[2.3′]oxindole‐spiro[3.7″] (3″‐Aryl)‐5″‐methyl‐3″,3a″,4″,5″,6″,7″‐hexahydro‐2H‐pyrazolo[4,3‐c]pyridine‐4‐aryl‐pyrrolidines Through Sequential 1,3‐Dipolar Cycloaddition and Annulation

The 1,3‐dipolar cycloaddition of an azomethine ylide, generated from isatin and sarcosine by a decarboxylative route with various p‐substituted 3,5 bis(aryl methylidene)N‐methyl‐4‐piperidinones in refluxing methanol, proceeded regioselectively to give novel dispiroheterocycles. The product on subsequent annulation with hydrazine hydrate afforded 1‐N‐methyl‐spiro[2.3′]oxindole‐spiro[3.7″](3″‐aryl)‐5″‐methyl‐3″,3a″,4″,5″,6″,7″‐hexahydro‐2H‐pyrazolo[4,3‐c]pyridine‐4‐aryl‐pyrrolidines in good yield.     

Efficient,Optimized Applications of p-Nitrophenyl Active Ester Temporarily Protecting Groups Together with Simultaneous Activation in Synthesis of Special Glu and Lys Peptides

Benzyloxycarbonyl-glutamylpeptide p-nitrophenylesters were prepared from protected amino acids, e.g.: p-nitrophenyl-glutamate as carboxyl component and aminoacid or peptide p-nitrophenylesters as amino components by different kinds of peptide coupling methods. Mixed carbonic anhydride and azide methods gave good results. The p-nitrophenylesters existed as temporary protecting groups, so the peptide couplings proceeded together with simultaneous activation. The conditions and applications of the procedure are discussed. The peptides having one or more active ester groups were used to form amides by their aminolysis with derivatives of ethylamine or were polycondensated (after deprotection) to obtain polypeptides.     

Selective synthesis of fluorinated carbohydrates using N,N-diethyl-α,α-difluoro-(m-methylbenzyl)amine

Deoxyfluorination of a hydroxy group in carbohydrates was carried out using N,N-diethyl-α,α-difluoro-(m-methylbenzyl)amine. A primary hydroxy group in carbohydrates was effectively converted to the corresponding fluoride under microwave irradiation or at 100 °C. Deoxyfluorination of hydroxy groups at the anomeric position proceeded at below room temperature, and glycosyl fluorides could be obtained in good yields. The reaction chemoselectively proceeded, and various protecting groups of carbohydrates can survive under the reaction conditions.     

Irreversible enzyme inhibitors. LXXXIX. candidate active-site-directed irreversible inhibitors of dihydrofolic reductase. X. derivatives of 2-amino-5-benzamidopropyl-4-pyrimidinol

Since 2-amino-5-benzamidopropyl-6-methyl-4-pyrimidinol (VII) was a reasonably good reversible inhibitor of dihydrofolic reductase, the benzamido group was substituted with p-bromomethyl (XVIIa), m-bromomethyl (XVIIIa), and p-bromoacetyl (XIXa) groups; these compounds, and the corresponding 6-phenylpyrimidines, were synthesized from the proper 2-amino-5-aminopropyl-4-pyrimidinol (V) by devising methods that were compatible with the high reactivity of the halogen. Compounds XVII-XIX showed in-activation of dihydrofolic reductase; the fact that p-nitrobenzyl bromide inactivated the enzyme as rapidly as XVII and XVIII and phenacyl bromide inactivated the enzyme as rapidly as XIX indicated that these inactivations proceeded by a random bimolecular mechanism and not the desired active-site-directed mechanism.     

Electrocatalytic Oxidation and Voltammetric Determination of Hydrazine on the Tetrabromo‐p‐Benzoquinone Modified Carbon Paste Electrode

The electrochemical properties of hydrazine studied at the surface of a carbon paste electrode spiked with p‐bromanil (tetrabromo‐p‐benzoquinone) using cyclic voltammetry (CV), double potential‐step chronoamperometry and differential pulse voltammetry (DPV) in aqueous media. The results show this quinone derivative modified carbon paste electrode, can catalyze the hydrazine oxidation in an aqueous buffered solution. It has been found that under the optimum conditions (pH 10.00), the oxidation of hydrazine at the surface of this carbon paste modified electrode occurs at a potential of about 550 mV less positive than that of a bar carbon paste electrode. The electrocatalytic oxidation peak current of hydrazine showed a linear dependent on the hydrazine concentrations and linear analytical curves were obtained in the ranges of 6.00×10^?5 M–8.00×10^?3 M and 7.00×10^?6 M–8.00×10^?4 M of hydrazine concentration with CV and differential pulse voltammetry (DPV) methods, respectively. The detection limits (3σ) were determined as 3.6×10^?5 M and 5.2×10^?6 M by CV and DPV methods. This method was also used for the determination of hydrazine in the real sample (waste water of the Mazandaran wood and paper factory) by standard addition method.     

Selective Cycloaddition of Tetracyanoethene (TCNE) and 7,7,8,8‐Tetracyano‐p‐quinodimethane (TCNQ) to Afford meso‐Substituted Phenylethynyl Porphyrins

π‐Extended TCBD‐porphyrins that contained a 1,1,4,4‐tetracyanobuta‐1,3‐diene unit were prepared by a highly efficient [2+2] cycloaddition of tetracyanoethene (TCNE) or 7,7,8,8‐tetracyano‐p‐quinodimethane (TCNQ) with meso‐substituted trans‐A₂B₂‐porphyrins that contained two phenylethynyl groups, followed by a retro‐electrocyclization reaction. Depending on the electronic properties of the arylethynyl groups, the cycloaddition reaction took place exclusively on either one or two ethynyl moieties with high yield. The addition of TCNQ proceeded with complete regioselectivity. The resulting π‐expanded TCBD‐porphyrins had a hypsochromically shifted Soret band and showed unique, broad absorption in the visible region.     

Cyclothiomethylation of aryl hydrazines with formaldehyde and hydrogen sulfide

Cyclothiomethylation of phenyl hydrazine with CH₂O and H₂S in a ratio of 1: 3: 2 in an acidic medium (HCl) afforded previously unknown 3-phenyl-1,3,4-thiadiazolidine (35% yield) and N-phenyl(perhydro-1,3,5-dithiazin-5-yl)amine (35% yield). The analogous reaction in an alkaline medium (BuONa) produced N-phenyl(perhydro-1,3-thiazetidin-3-yl)amine (22% yield). The reaction of 1,2-diphenyl hydrazine with CH₂O and H₂S in an alkaline medium gave 1,2,4,5-tetraphenylhexahydro-1,2,4,5-tetrazine and previously unknown 3,4-diphenyl-1,3,4-thiadiazolidine and 5,6-diphenyltetrahydro-1,3,5,6-dithiadiazepine in 39 and 22% yields, respectively. Cyclothiomethylation of benzyl hydrazine afforded previously unknown bis[(6-benzyl-4,2,6-thiadiazolidin-2-yl)methyl] sulfide (60% yield) and N-benzyl(perhydro-1,3,5-dithiazin-5-yl)amine (19% yield). The reaction of tosyl hydrazine produced 3-[(p-tolyl)sulfonyl]-1,3,4-thiadiazolidine, N-(perhydro-1,3,5-dithiazin-5-yl)-p-tolylsulfonamide, and 3,7-bis(p-tolylsulfonylamino)-1,5-dithia-3,7-diazacyclooctane in 21, 38, and 41% yields, respectively. Published in Russian in Izvestiya Akademii Nauk. Seriya Khimicheskaya, No. 10, pp. 1758–1767, October, 2006.     

Synthesis of 3-cyano-2-pyridone derivative and its utility in the synthesis of some heterocyclic compounds with expecting antimicrobial activity

New 2-pyridone derivatives bearing p-methoxyphenyl and p-bromophenyl substituents at C-4 and C-6 were prepared smoothly by the one-pot reaction in high yield, and in a comparatively short time, it reacted with phosphorous oxychloride to produce the corresponding chloro compound. The latter was reacted with several nitrogen nucleophiles such as sodium azide, hydrazine, acetohydrazide, and benzohydrazide to give tetrazolo, hydrazino, and triazolo derivatives, respectively. The reaction of hydrazino derivative with cyclopentanone, furan-2-carbaldehyde afforded the corresponding hydrazone derivatives. Cyclocondensation of the latter compounds with thioglycolic acid afforded the nicotinamide derivatives. 2-Pyridone reacted with ethyl chloroacetate to afford chloroacetate and ethyl acetate derivatives. Ethyl acetate-derivative reacted with hydrazine hydrate and gave the acetohydrazide derivative, it was condensed with p-anisaldehyde and gave the 4-methoxybenzylidene acetohydrazide derivative. Also, 2-pyridone reacted with chloroacetic acid and or benzoyl chloride, afforded the benzoate derivative and 2-((6-(4-bromophenyl)-3-cyano-4-(4-methoxyphenyl) pyridin-2-yl) oxy) acetic acid, respectively. Structures of the products were confirmed using spectroscopic data and elemental analyses. Antibacterial activity of the synthesized compounds was evaluated against Escherichia coli and Staphylococcus aureus.     

Synthesis of acylphosphine sulfides by rhodium-catalyzed reaction of acid fluorides and diphosphine disulfides

A rhodium complex catalyzed the reaction of acid fluorides and tetraethyldiphosphine disulfide giving acylphosphine sulfides. Aromatic acid fluorides with electron donating p-groups reacted smoothly giving the products in high yields. Aliphatic acid fluorides with secondary and tertiary α-carbons were also converted to alkanoylphosphine sulfides, whereas the reaction of a substrate with an α-methylene carbon was accompanied by enol ester formation.     

Phenolic resins for solid-phase peptide synthesis: Copolymerization of styrene and p-acetoxystyrene

Details are given of the synthesis and purification of p-acetoxystyrene and its solution and suspension copolymerization with styrene. Reactivity ratios, evaluated by the Tidwell-Mortimer method, were r₁ (p-acetoxystyrene) = 1.18, and r₂ (styrene) = 0.88 for (bulk) solution copolymerization. Corresponding values of the reactivity ratios for suspension copolymerization were, within experimental error, indistinguishable from unity. Thus the copolymer composition is governed simply by the monomer feed composition. Use of a specially designed reactor vessel permits convenient suspension copolymerization of styrene, p-acetoxystyrene, and divinylbenzene to give crosslinked resins having comparatively narrow particle size distributions. Acetoxy groups in the crosslinked resin are cleaved by hydrazine hydrate under very mild conditions to give crosslinked polystyrenes having phenolic groups which, in turn, provide a useful alternative to the more usual chloromethylated polystyrene resins for solid-phase peptide synthesis.     

Loss of CO from the molecular ions of o-, m- and p-anisoyl fluorides,CH3OC6H4COF,with fluorine atom migration

Loss of CO from the molecular ions ([CH₃OC₆H₄COF]⁺˙) of o-, m- and p-anisoyl fluorides has been investigated by mass-analysed ion kinetic energy (MIKE) spectrometry. This reaction involves fluorine atom migration from the carbonyl group to the benzene ring. In the cases of o- and p-anisoyl fluorides, the fluorine atom migrates via a three-membered transition state to form the molecular ions ([CH₃OC₆H₄F]⁺˙) of o- and p-fluoroanisoles, respectively. On the other hand, in the case of m-anisoyl fluoride, the fluorine atom migrates from the carbonyl group to the benzene ring via a three- or four-membered transition state.     

Comparison of the reactivity of N‐(p‐toluenesulfonyl)‐sulfinimidoyl fluorides and chlorides toward triphenylphosphine

The path of the reaction of aryl‐N‐(p‐toluenesulfonyl)‐sulfinimidoyl fluorides and triphenylphosphine is highly dependent on the order of the reactants addition. Addition of triphenylphos‐phine to aryl‐N‐(p‐toluenesulfonyl)‐sulfinimidoyl fluorides results in the formation of triphenyl(aryl‐thio)phosphonium salts of N,N′‐bis(p‐toluenesul‐fonyl)aryl‐sulfinamidines and triphenyldifluorophosphorane. By changing the reagent addition order, we obtained triphenyldifluorophosphorane, P,P,P‐triphenyl‐N‐(p‐toluenesulfonyl)‐phosphine imide, and diaryl disulfides. The outcome of the reaction aryl‐N‐(arenesulfonyl)‐sulfinimidoyl chlorides and triphenylphosphine does not depend on the order of addition of the reactants. P,P,P‐Triphenyl‐N‐(arenesulfonyl)‐phosphine imides, triphenyldichloro‐phosphorane, and diaryl disulfides were formed as a result. © 2008 Wiley Periodicals, Inc. Heteroatom Chem 19:66–71, 2008; Published online in Wiley InterScience ( www.interscience.wiley.com ). DOI 10.1002/hc.20408     

A colorimetric method for the determination of carbonyl groups in cellulose

A method is suggested for the determination of carbonyl groups in cellulose based on the reaction with hydrazine. After washing with water, the cellulose hydrazone is dissolved in sulfuric acid and hydrolyzed. The liberated hydrazine is determined colorimetrically with p-dimethylamino-benzaldehyde. Possible interferences from carboxyl groups are discussed.     

Studies on enaminonitriles: A new synthesis of 1,3‐substituted pyrazole‐4‐carbonitrile

3‐Diethylaminoacrylonitrile ( 1 ) reacts with hydrazonyl halides ( 2a‐d ) to yield 1,3‐disubstituted pyrazole‐4‐carbonitriles 5a‐d. The acetyl 1‐p‐chlorophenylpyrazole‐4‐carbonitrile ( 5a ) condensed with hydrazine hydrate to yield the bishydrazone 10 and with dimethylformamide dimethylacetal to yield 1‐aryl‐3‐(3‐dimethylamino)acryloyl pyrazole‐4‐carbonitrile ( 11 ). This enamine reacts with hydrazine hydrate to yield the pyrazolylpyrazole ( 12 ) and with naphthoquinone to yield the 3‐naphthofuranoyl pyrazole 13. The pyra‐zolyl pyridine derivative 14 was obtained upon treatment of 11 with acetylacetone in the presence of ammonium acetate. Compound 11 was coupled with p‐chlorobenzene diazonium chloride to yield the hydrazone 16 that was coupled further with p‐chlorobenzenediazonium chloride to yield the formazane 18.