Interaction of Fluorocarbon Containing Hydrophobically Mdified Polyelectrolyte with Nonionic Surfactants

The interaction of fluorocarbon containing hydrophobically modified polyelectrolyte(FMPAANa) with two kinds of nonionic surfactants(hydrogenated and fluorinated)in a semidilute (0.5wt%) aqueous solution had been studied by rheological measurements,Association behavior was found in both systems.The hydrophobic interaction of FMPAANa with fluorinated surfactant(FC171) is much stronger than that with hydrogenated surfactant(NP7.5) at low surfactoant concentrations.The interaction is strengthened by surfactants being added for the density of active junctions increased.Whereas distinct phenomena for FC171 and NP7.5 start to be found as the surfactants added over their respective certain concentration.The interaction of polyelectrolyte with fluorinated surfactant increases dramatical ly while that with hydrogenated surfactant decreases.     

Vinylic polymerization of norbornene by neutral nickel(II)‐based catalysts

Neutral Ni(II) salicylaldiminato complexes activated with modified methylaluminoxane as catalysts were used for the vinylic polymerization of norbornene. Catalyst activities of up to 7.08 × 10⁴ kg_pol/(mol_Ni · h) and viscosity‐average molecular weights of polymer up to 1.5 × 10⁶ g/mol were observed at optimum conditions. Polynorbornenes are amorphous, soluble in organic solvents, highly stable, and show glass‐transition temperatures around 390 °C. Catalyst activity, polymer yield, and polymer molecular weight can be controlled over a wide range by the variation of the reaction parameters such as the Al/Ni ratio, monomer/catalyst ratio, monomer concentration, polymerization reaction temperature, and time. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 2680–2685, 2002     

Tetra‐μ‐acetato‐κ2O:O′‐bis[(4‐phenylpyridine‐κN)copper(II)]

The title compound, [Cu₂(C₂H₃O₂)₄(C₁₁H₉N)₂] or [Cu₂(MeCO₂)₄(phpy)₂] (phpy is 4‐phenyl­pyridine), consists of centrosymmetric dimers in which the Cu^II atoms display a square‐pyramidal CuO₄N coordination, with four acetate O atoms in the basal plane [Cu—O 1.975 (3)–1.987 (3) Å] and the phpy N atom in the apical position [Cu—N 2.150 (3) Å]. The Cu atoms are 2.654 (1) Å apart and are bridged by four acetate groups. The discrete dimers are extended into a three‐dimensional supramolecular array through intermolecular π–π‐stacking interactions.     

A graphical method to construct a phylogenetic tree

A 3D graphical representation of DNA sequences, which has no circuit or degeneracy, is derived for mathematical denotation of DNA sequence. Based on this graphical representation, we propose a new sequence distance measure. We make use of the corresponding similarity matrix to construct a phylogenic tree by virtue of the fuzzy theory. The examination of phylogenic tree belong to eight species illustrates the utility of our approach. © 2006 Wiley Periodicals, Inc. Int J Quantum Chem, 2006     

Single-walled carbon nanotube-based coaxial nanowires: synthesis, characterization, and electrical properties

We report herein the template-directed synthesis, characterization, and electric properties of single-walled carbon nanotube- (SWNT-) based coaxial nanowires, that is, core (SWNT)-shell (conducting polypyrrole and polyaniline) nanowires. The SWNTs were first dispersed in aqueous solutions containing cationic surfactant cetyltrimethylammonium bromide (CTAB) or nonionic surfactant poly(ethylene glycol) mono-p-nonyl phenyl ether (O pi-10). Each individual nanotube (or small bundle) was then encased in its own micellelike envelope with hydrophobic surfactant groups orientated toward the nanotube and hydrophilic groups orientated toward the solution. And thus a hydrophobic region within the micelle/SWNT (called a micelle/SWNT hybrid template) was formed. Insertion and growth of pyrrole or aniline monomers in this hybrid template, upon removal of the surfactant, produce coaxial structures with a SWNT center and conducting polypyrrole or polyaniline coating. Raman and Fourier transform infrared (FTIR) spectroscopy and scanning (SEM) and transmission (TEM) electron microscopy were used to characterize the composition and the structures of these coaxial nanowires. The results revealed that the micellar molecules used could affect the surface morphologies of the resulting coaxial nanowires but not the molecular structures of the corresponding conducting polymers. Electric properties testing indicated that the SWNTs played the key roles in the conducting polymer/SWNT composites during electron transfer in the temperature range 77 K to room temperature. Compared with the SWNT network embedded in the conducting polymers, the composites within which SWNTs were coated perfectly by the identical conducting polymers exhibited higher barrier heights during electron transfer.     

Compactification of a myelin mimetic Langmuir monolayer upon adsorption and unfolding of myelin basic protein

The surface shear viscosity of a myelin mimetic Langmuir monolayer is investigated upon adsorption of myelin basic protein (MBP). We measure an increase of the surface shear viscosity at picomolar concentrations of the protein, suggesting that the globular conformation of MBP changes upon adsorption at the monolayer. The conformational change enables hydrodynamic interactions of the proteins, with a typical separation of hundreds of nanometers. This unfolding is essential for the compactification of the myelin sheath, serving an enhanced saltatory signal transduction in vertebrates. The viscometry used extends the sensitivity of standard surface viscometers toward lower viscosities.     

Michael-Addition Reaction of Malononitrile with α,β-Unsaturated Cycloketones Catalyzed by KF／Al2O3

A series of KF/Al2O3 catalyzed Michael-addition reactions between malononitrile and α,β-unsaturated cycloketones in DMF solution were studied. At room temperature, 2-cyano-3-aryl-3-(1,2,3,4-tetrahydronaphthalen-1-one-2-yl) propionitrile derivatives were synthesized by the reaction between 2-arylmethylidene-1,2,3,4-tetra-hydronaphthalen-1-one and malononitrile. However, if the temperature was increased to 80℃, 2-amino-3-cyano-4-aryl-4H-benzo[h]chromene derivatives were obtained in high yields. When the α,β-unsaturated ketones were replaced by 2,6-biarylmethylidenecyclohexanone or 2,5-biarylmethylidenecyclopentanone, another series of 2-amino-3-cyano-4H-pyran derivatives was isolated successfully. The structures of the products were confirmed by X-ray diffraction analysis.     

Four New Podocarpane‐Type Trinorditerpenes from Aleurites moluccana

Four new podocarpane‐type trinorditerpenenes, (5β,10α)‐12,13‐dihydroxypodocarpa‐8,11,13‐trien‐3‐one ( 1 ), (5β,10α)‐12‐hydroxy‐13‐methoxypodocarpa‐8,11,13‐trien‐3‐one ( 2 ), (5β,10α)‐13‐hydroxy‐12‐methoxypodocarpa‐8,11,13‐trien‐3‐one ( 3 ), and (3α,5β,10α)‐13‐methoxypodocarpa‐8,11,13‐triene‐3,12‐diol ( 4 ), together with four known diterpenes, 12‐hydroxy‐13‐methylpodocarpa‐8,11,13‐trien‐3‐one ( 5 ), spruceanol ( 6 ), ent‐3α‐hydroxypimara‐8(14),15‐dien‐12‐one ( 7 ), and ent‐3β,14α‐hydroxypimara‐7,9(11),15‐triene‐12‐one ( 8 ), were isolated from the twigs and leaves of Aleurites moluccana. Their structures were elucidated by means of comprehensive spectroscopic analyses, including NMR and MS. Except 8 , all compounds were evaluated for their cytotoxicity; compound 4 exhibited moderate inhibitory activity against Raji cells with an IC₅₀ value of 4.24 μg/ml.     

Diterpenoids of Isodon macrophylla

Two new ent‐abietane diterpenoids, macrophynin E ( 1 ) and macrophynin F ( 2 ), and a known related ent‐abietanoid (?)‐lambertic acid ( 3 ), together with four known ent‐kauranoids, were isolated from the roots and aerial parts of Isodon macrophylla, respectively. The structures of the new compounds were elucidated on the basis of spectroscopic‐data analysis and chemical correlations.