铕-3-(2-萘甲酰基)-2-苯基苯并二氢吡喃-4-酮-邻菲罗啉配合物的合成及荧光性能研究

为了探讨2,3-二氢黄酮类化合物在发光材料方面的应用,首先合成了2,3-二氢黄酮类衍生物[3-(2-萘甲酰基)-2-苯基苯并二氢吡喃-4-酮(L)]配体,然后利用Eu(III)与此配体和水/邻菲罗啉(Phen)反应得到两种新型的红色荧光配合物。运用元素分析、红外光谱与荧光光谱等手段对相关物质进行了系统的表征。表征结果表明:两个新配合物的组成分别为Eu(L)3·2H2O和Eu(L)3·Phen;荧光光谱研究显示,两种配合物的配体能将吸收的能量有效地传递给铕离子,从而使配合物发射出强的铕离子的特征荧光,且两个配合物Eu(L)3·2H2O和Eu(L)3·Phen均以5D0→7F2跃迁的荧光发射最强。得到了两种新的高效的红色荧光材料。     

电感耦合等离子体原子发射光谱法测定陶瓷色釉料中稀土元素

为了防止稀土的低附加值滥用,控制陶瓷色釉料中的稀土含量尤为重要,本方法为制订出入境检验检疫行业标准《陶瓷色釉料中稀土总量的测定电感耦合等离子体原子发射光谱法》提供可靠依据。由于陶瓷色釉料极其稳定的化学性质,因此不能采用传统的消解方法进行样品前处理,本文提出了用改进后的氢氧化钠和过氧化钠体系高温碱熔陶瓷色釉料,再用电感耦合等离子体原子发射光谱仪测定La,Ce,Pr,Nd,Sm,Eu,Gd,Tb,Dy,Ho,Er,Tm,Yb,Lu,Y 15种稀土元素总量的方法。在陶瓷色釉料的消解方法、待测元素波长的选择和基体干扰校正方面进行重点研究。选取具有代表性的陶瓷色釉料样品进行回收率、精密度及重现性试验,测得方法的回收率在94.7%~102.7%,精密度小于2.7%,重现性小于4.3%。计算了15种稀土元素的检出限均小于0.51 mg·kg-1。     

Quantum-chemical study on the catalytic activity of TinRumO2(1 1 0) surfaces on chlorine evolution

Based on the generalized gradient approximation (GGA), Perdew-Wang-91 (PW91) combined with a periodic slab model has been applied to study the catalytic activity of chlorine evolution on TinRumO2(1 1 0) surface. Metal oxide model TinRumO2 has been established with pure TiO2 and RuO2 on the basis set of Double Numerical plus polarization (DNP), in which the proportion of n:m was 3:1, 1:1, or 1:3. Analysis on the reaction activity in the electrochemical reaction and the electrochemical desorption reaction was based on Frontiermolecular orbital theory. The results show that the TinRumO2 with a ratio of Ti:Ru at 3:1 is best facilitates the electrochemical reaction and electrochemical desorption reaction to produce M-Clads intermediate and precipitate Cl2. In addition, the adsorption energy of Cl on the surface of Ti3Ru1O2 possesses the minimum value of 2.514 eV, and thus electrochemical desorption reaction could occur most easily.     

Bis-triarylamine with a cyclometalated diosmium bridge: A multi-stage redox-active system

A tetra(pyrid-2-yl)-pyrazine-bridged cyclometalated diosmium complex 1(PF6)2with two distal redoxactive organic amine substituents has been synthesized and characterized. This complex displays four consecutive and separated anodic redox waves at +0.24, +0.38, +0.64, and +0.71 V vs. Ag/Ag Cl. Upon stepwise oxidation, four-step absorption spectral changes in the visible to near-infrared region have been observed. The different redox states of 1(12+through 16+) can be distinguished by the significantly different absorption spectra in the visible and near-infrared region. DFT calculations of 13+show that the spin is delocalized on both osmium–amine components.     

Ionic liquid and aqueous two‐phase extraction based on salting‐out coupled with high‐performance liquid chromatography for the determination of seven rare ginsenosides in Xue‐Sai‐Tong injection

A method of ionic liquid salt aqueous two‐phase extraction coupled with high‐performance liquid chromatography has been developed for the analysis of seven rare ginsenosides including Rg₆, F₄, 20(S)‐Rg₃, 20(R)‐Rg₃, Rk₃, Rk₁, and Rg₅ in Xue‐Sai‐Tong injection. The injection was mixed with ionic liquid 1‐butyl‐3‐methylimidazolium bromide aqueous solution, and a mixture was obtained. With the addition of sodium dodecyl sulfate and dipotassium phosphate into the mixture, the aqueous two‐phase mixture was formed after ultrasonic treatment and centrifuged. Rare ginsenosides were extracted into the upper phase. To obtain a high extraction factors, various influences were considered systematically, such as the volume of ionic liquid, the category and amount of salts, the amount of sodium dodecyl sulfate, the pH value of system, and the time of ultrasonic treatment. Under the optimal condition, rare ginsenosides in Xue‐Sai‐Tong injection were enriched and detected, the recoveries of seven rare ginsenosides ranged from 90.05 to 112.55%, while relative standard deviations were lower than 2.50%. The developed method was reliable, rapid and sensitive for the determination of seven rare ginsenosides in the injections.     

Three‐Arm Branched Microporous Organic Nanotube Networks

Here, a novel method is demonstrated for the preparation of three‐arm branched microporous organic nanotube networks (TAB‐MONNs) based on molecular templating of three‐arm branched core–shell bottlebrush copolymers and Friedel–Crafts alkylation reaction. The unique three‐arm branched bottlebrush copolymers are synthesized by a combination of atom transfer radical polymerization, reversible addition‐fragmentation chain transfer polymerization, and ring‐opening polymerization techniques. In this approach, the length and diameter of branched tube units can be well‐controlled by rational molecular design. Moreover, the as‐prepared TAB‐MONNs possess a high surface area and exhibit a superior adsorption capacity for Rhodamine 6G (R6G) and p‐cresol.

     

Self-assembly and morphological characterization of two-component functional amyloid proteins

Functional amyloid has been increasingly applied as self-assembling nanostructures to construct multifunctional biomaterials. However, little has been known how different side domains, varied fusion positions and subunits affect self-assembly and morphologies of amyloid fibrils. Here, we constructed three groups of two-component amyloid proteins based on CsgA, the major protein components of Escherichia coli biofilms, to bridge these gaps. We showed that all fusion proteins have amyloid features, as indicated by Congo red assay. Atomic force microscopy (AFM) indeed reveals that these fusion proteins are able to self-assemble into fibrils, with an average diameter of 0.5-2 nm and length of hundreds of nanometers to several micrometers. The diameter of fibrils increases with the increase of the molecular weight of fusion domains, while the dynamic assembly of recombinant proteins was delayed as a result of the introduction of fusion domains. Moreover, fusion of the same functional domains but at intermediate position seems to cause the most interference on fibril assembly compared with those fused at C or Nterminus, as mainly short and irregular fibrils were detected. This phenomenon appears more pronounced for randomly coiled mussel foot proteins (Mfps) than for rigid chitin-binding domain (CBD). Finally, increase of the molecular weight of tandem repeats in protein monomer seemed to increase the fibril diameter of the resultant fibrils, but either reduction of the tandem repeats of CsgA to one single belta-sheet loop or increase in the number of tandem repeats of CsgAs from one to four produced shorter and intermittent fibrils compared with CsgA control protein. These studies therefore provide insights into self-assembly of two-component amyloid proteins and lay the foundation for rational design of multifunctional molecular biomaterials.     

MoS2 nanosheet arrays supported on hierarchical porous carbon with enhanced lithium storage properties

MoS₂ nanosheet arrays supported on hierarchical nitrogen-doped porous carbon(MoS₂@C)have been synthesized by a facile hydrothermal approach combined with high-temperature calcination.The hierarchical nitrogen-doped porous carbon can serve as three-dimensional conductive frameworks to improve the electronic transport of semiconducting MoS₂.When evaluated as anode material for lithium-ion batteries,the MoS₂@C exhibit enhanced electrochemical performances compared with pure MoS₂ nanosheets,including high capacity(1305.5 mA h g^-1 at 100 mA g^-1),excellent rate capability (438.4 mA h g^-1 at 1000 mA g^-1).The reasons for the improved electrochemical performances are explored in terms of the high electronic conductivity and the facilitation of lithium ion transport arising from the hierarchical structures of MoS₂@C.     

气相二氧化硅填充极性低聚物的界面与流变

气相二氧化硅(FS)/低聚物纳米复合材料应用广泛于涂料、胶黏剂、锂离子电池、液体防弹衣等诸多领域.然而,极性低聚物与FS表面相互作用复杂,FS/低聚物复合材料(ONCs)的流变响应多种多样.如何实现ONCs流变行为调控,是长期困扰工业界的难题.本文详细总结了FS在ONCs领域的应用,将FS粒子间相互作用与ONCs流变性质相关联,综述ONCs界面层结构的表征、调控手段及界面层与流变行为的关系.结合本课题组对FS/极性低聚物体系界面及流变行为的研究成果,提出未来ONCs领域的2个重要方向,即研究界面结构与粒子-极性低聚物相互作用间的关系,并通过界面设计实现对纳米粒子/极性低聚物复合材料的流变行为的精确调控.     

色谱柱分类数据库用于指导天然药物化学对照品色谱纯度测定时色谱柱理性选择

由于中药化学对照品多数来源于动植物药材,很容易混有结构类似物,故有机杂质测定是可能影响其化学对照品赋值准确性的关键风险因素。中药化学对照品的有机杂质测定通常采用药典收载或文献报道的高效液相色谱法,这些方法通常仅规定“以十八烷基硅烷键合硅胶为填充剂”,无适宜色谱柱的品牌信息,或者实验室无文献所用的色谱柱品牌,而目前市场上已有800多种品牌的C₁₈柱,生产工艺的不同导致不同品牌C₁₈柱的选择性有差异,甚至差异显著。这很容易出现由于色谱柱选择不适宜而导致测定结果不准确的风险。该文采用国外色谱柱分类数据库指导对照品纯度考察时色谱柱的理性选择,尽可能减少色谱柱盲选可能导致的纯度结果不准确的风险。首先,用数据库挑选2根选择性差异显著的色谱柱（选择性因子F≥6）进行平行实验,以尽可能反映采用不同品牌色谱柱可能出现的分离效果差异。如果这2根色谱柱的分离效果及纯度测定结果无显著性差异,则可以交叉验证该对照品纯度测定的准确性。否则需要从数据库中选择另外1根与之前试验中分离效果更好、选择性相似的色谱柱进行纯度结果验证。在N-反式-p-对香豆酰基酪胺和表儿茶素没食子酸酯首批对照品的纯度考察中,使用了上述策略并验证了其有效性和科学性,计划推广应用至更多的中药化学对照品,特别当其可能含碱性或弱酸性化合物时,更应该尝试采用本文推荐的色谱柱选择策略交叉验证其纯度测定结果的准确性。