硼掺杂VO2（M）纳米棒的合成、相转变及光学特性

采用V2O5和硼酸为原材料,草酸为还原剂,在水热条件下,成功制备出硼(B)掺杂VO2(B)纳米棒,经Ar气环境退火后,得到了V1-xBxO2(M)系列样品。样品的结构、形貌和相转变温度分别用X-射线粉末衍射(XRD)仪、扫描电子显微镜(SEM)和差示扫描量热仪(DSC)等进行表征。用X-射线光电子谱(XPS)来表征样品的组份和元素的价态,样品的红外光吸收谱也被测量。结果显示,当B掺杂达到2.0at%时,V1-xBxO2(M)相的转变温度升高到75.03℃。这个升高的相转变温度可归因于B3+替代V4+引起VO6八面体的晶格畸变,以及局域晶格电子密度的降低。     

Regulating Phase Junction and Oxygen Vacancies of TiO2 Nanoarrays for Boosted Photoelectrochemical Water Oxidation

In this study, we have provided a facile solution to synthesize well-aligned titanium dioxide nanorods by using hydrothermal reaction. By calcining the materials under different atmospheres and temperatures, a batch of titanium dioxides with excellent oxygen evolution reaction(OER) catalytic efficiency were obtained. This new structured TiO₂ photoanode material yields a high photocurrent density of 5.69 mA/cm² at 1.23 V vs. reversible hydrogen electrode(RHE) under simulated solar light(100 mW/cm²). Surface photovoltage techniques and other measurements were carried out to confirm that the enhanced photoelectrochemical performances were attributed to the synergistic effect of the phase junction and a certain content of surface states, which accelerate the separation and transmission of the photogenerated charges. This material with phase junction and surface states promises a potential application in the field of photoelectric catalysis under solar light.     

Construction and application of an electrochemical sensor based on graphene-MXene nanocomposites for baicalin detectionEI北大核心CSCD

Redox graphene-MXene(rGO-MXene) nanocomposites were prepared by ion polymerization and used to construct a highly sensitive electrochemical sensor for baicalin(BA) detection. The synergistic effect of rGO and MXene increased the specific surface area and electron transport capacity of the electrode, and significantly enhanced the electrochemical response of BA. The cyclic voltammetry and differential pulse voltammetry were used to investigate the electrochemical behavior of BA on the sensor. Under the optimal conditions, the peak current exhibited a good linear relationship with BA concentration in the range of 0. 05-10 μmol / L, and the limit of detection was as low as 28 nmol / L. The method was applied to analyze traditional Chinese medicine preparations containing baicalin, such as Qingkailing Capsule and Sanhuang Tablets with good accuracy and spiked recovery. The results were highly consistent with those of high performance liquid chromatography, providing a technical means for the rapid and sensitive detection of traditional Chinese medicine preparations. © 2022, Youke Publishing Co.,Ltd. All rights reserved.     

环戊基全取代六元瓜环与钾离子配合物的合成及其结构表征

金属与瓜环的配位化学是瓜环化学的主要研究内容之一.本文主要研究了环戊基全取代六元瓜环(CyP6 Q[6])与K+的配合物的合成,并利用X-射线单晶衍射法对其晶体结构进行了表征.结果表明:K+与CyP6 Q[6]的两个端口配位,形成了分子胶囊结构.相邻的瓜环通过与[ZnCl4]2-的偶极作用,形成平面堆积结构,最后形成三维超分子自组装实体.     

茴拉西坦/介孔二氧化硅的制备及释药性能

为了提高难溶性药物的溶出速率,采用水热合成法制备了MCM-41和SBA-15两种介孔二氧化硅载体材料,利用浸渍法将模型药茴拉西坦负载于两种载体上.利用扫描电子显微镜(SEM)、高分辨透射电子显微镜(HRTEM)、小角X射线衍射(XRD)、N2吸附-脱附、红外光谱(IR)、差热-热重(DTA-TG)对载药前后载体材料的表面形貌、粒径、孔径、孔容、比表面积、晶胞参数、骨架结构等进行测试,结果表明MCM-41和SBA-15具有相同的二维六方孔道结构,孔径及孔容分别为3.49 nm和6.67 nm,载药后的载药量分别为17;和22;,药物以非晶态装载于介孔孔道中没有影响介孔二氧化硅的骨架结构,但使介孔孔容及比表面积都有所降低.通过在不同pH溶出介质中负载于载体上的茴拉西坦与原料药晶体的溶出比较发现,两种载体均能够显著提高茴拉西坦的溶出速率.结合材料表征、载药量及溶出度综合比较,SBA-15载体的载药及释药性能均优于MCM-41载体.     

白光LED用近紫外光激发的蓝绿色荧光粉Sr5(PO4)3F∶Eu2+的光谱性能及助熔剂的影响

本文采用还原氛下的高温固相法合成了荧光粉Sr5(PO4)3F∶ Eu2+并对其性能进行了表征,同时研究了助熔剂硼酸对该荧光粉的影响.结果 表明:在1200℃还原氛下制得的荧光粉Sr5(PO4)3F∶ Eu2+,激发峰位于418 nm,发射峰位于524 nm,是能与近紫外光LED相匹配的蓝绿色荧光粉.Eu2的最佳掺杂浓度为15mo1;,对应的色坐标为(0.2871,0.4036).添加助熔剂H3BO3可以使荧光粉Sr5(PO4)3F∶Eu2+的合成温度由1200℃降低到1100℃,最佳掺杂浓度为5wt;,同时可以增加荧光粉的发光强度.     

还原氮化温度对氮化铌纳米管组成、结构与电化学性能影响研究

以铌箔为基底,用阳极氧化法结合氨气还原氮化法制备出氮化铌纳米管,利用X射线衍射仪(XRD)、X射线光电子能谱(XPS)和扫描电镜(SEM)等结构表征手段和循环伏安法(CV)、充放电(GCD)和交流阻抗法(EIS)等电化学测试手段研究了还原氮化温度对纳米管的物相、形貌以及电化学性能的影响.结果表明,还原氮化后出现了氮化铌物相,以氧氮化铌固溶体形式存在,当还原氮化温度为700℃时,氮化铌纳米管阵列结构均匀,纳米管的孔内径约为35 nm,管壁厚度约为12 nm,纳米管长度约为1.5μm,样品中内在阻抗和电荷转移电阻较小,在电流密度为0.1 mA/cm2时,其比电容为400μF/cm2.     

高能量密度型锂离子电池正极材料LiNi0.5Mn1.5O4改性的研究进展

尖晶石镍锰酸锂(LiNi0.5Mn1.5O4)具有工作电压高、结构稳定、适合快充快放等特性成为高能量及高功率密度型正极材料的有力竞争者.结合了近几年的研究报道,介绍了LiNi0.5 Mn1.5O4的结构、制备方法、改性方法及其应用前景,着重介绍了LiNi0.5 Mn1.5O4材料晶型结构对其性能的影响,并指出该材料目前存在的问题和研究重点.